TITLE

Optical signatures of a shock wave emerging from a metallic free surface

AUTHOR(S)
Ao, T.; Chiu, G.; Forsman, A.; Ng, A.
PUB. DATE
April 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 505 Issue 1, p971
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Optical probing is one of the most widely used diagnostics for the study of shock waves emerging from a free surface of a metal. A clear understanding of the optical signatures such as reflectivity and emission intensity is therefore of long standing interest. Using numerical simulations, we will delineate the roles of the shock front structure and various processes that impose significant impact on the diagnostic. Our model prediction will also be compared with reported experimental results.
ACCESSION #
5985352

 

Related Articles

  • Laser Embossing of Self-Organized Nanostructures into Metal Surfaces by KrF Laser Irradiation. EHRHARDT, Martin; LORENZ, Pierre; TEICHMANN, Marc; LORBEER, Jan; FROST, Frank; ZIMMER, Klaus // Journal of Laser Micro / Nanoengineering;2013, Vol. 8 Issue 1, p85 

    In the recent decades the importance of nanostructured surfaces has rapidly grown due to the large range of applications of these improved surfaces in the fields of, e.g. optics, biology, and mi-croelectromechanical systems. However, a flexible and low-cost manufacturing process which is...

  • Science 102.  // Science & Children;Dec2015, Vol. 53 Issue 4, p79 

    The article presents questions and answers related to science, including how shock-avoidance methods work when touching metal surfaces and the changes in pitch experienced when tapping a coffee cup.

  • Optodynamic energy conversion efficiency during laser ablation on metal surfaces measured by shadow photography. Gregorčič, P.; Zadravec, J.; Možina, J.; Jezeršek, M. // Applied Physics A: Materials Science & Processing;Oct2014, Vol. 117 Issue 1, p353 

    In this investigation, we used high-speed shadow photography to observe fast optodynamic phenomena such as shock waves and the ablation of flat metal surfaces. These phenomena were induced in air by a Q-switched Nd:YAG laser ( λ = 1,064 nm) with a pulse duration of 4 ns and an excitation...

  • QUANTIFICATION OF EJECTA FROM SHOCK LOADED METAL SURFACES. Kullback, B. A.; Terrones, G.; Carrara, M. D.; Hajj, M. R. // AIP Conference Proceedings;2012, Vol. 1426 Issue 1, p995 

    Mass ejecta from shock-loaded surfaces with finite disturbances were calculated for different elastic-perfectly plastic metals with the Mie-Gruneisen equation of state and with varying disturbance amplitudes (h0), wave numbers (k), and geometric shapes. In our simulations, the disturbance...

  • Reduction of Ejecta From Asperities on a Metal Surface upon Shock Breakout. Georges, William; Loiseau, Jason; Higgins, Andrew; Tyler, Troy; Zimmermann, Joerg // AIP Conference Proceedings;2017, Vol. 1793 Issue 1, p1 

    Ejecta can be produced when a shock breaks out of a metallic surface with imperfections. The amount of material ejected depends on the wave profile and the surface finish. This work focuses on techniques to reduce the amount of ejecta produced. As a baseline, a Taylor wave loading was produced...

  • Experimental validation of a diagnostic technique for tuning the fourth shock timing on National Ignition Facility. Robey, H. F.; Boehly, T. R.; Olson, R. E.; Nikroo, A.; Celliers, P. M.; Landen, O. L.; Meyerhofer, D. D. // Physics of Plasmas;Jan2010, Vol. 17 Issue 1, p012703 

    Capsule implosions on the National Ignition Facility (NIF) [Lindl et al., Phys. Plasmas 11, 339 (2004)] will be driven with a carefully tailored sequence of four shock waves that must be timed to very high precision in order to keep the fuel on a low adiabat. The Hohlraum conditions present...

  • Elastic-plastic shock wave profiles in oriented single crystals of cyclotrimethylene trinitramine (RDX) at 2.25 GPa. Hooks, Daniel E.; Ramos, Kyle J.; Martinez, A. Richard // Journal of Applied Physics;7/15/2006, Vol. 100 Issue 2, p024908 

    Plate impact experiments were performed on oriented single crystals of the energetic material cyclotrimethylene trinitramine (RDX). The experiments were performed to determine the anisotropic dynamic yield point for the RDX crystal, as well as to provide data for continuum modeling efforts....

  • TRANSIENT IMAGING DISPLACEMENT INTERFEROMETRY APPLIED TO SHOCK LOADING. Greenfield, S. R.; Luo, S. N.; Paisley, D. L.; Loomis, E. N.; Swift, D. C.; Koskelo, A. C. // AIP Conference Proceedings;12/12/2007, Vol. 955 Issue 1, p1093 

    We have applied Transient Imaging Displacement Interferometry (TIDI) to copper targets loaded by laser-launched flyers. TIDI captures the full-field out-of-plane surface displacement map single-shot with the time resolution of the illumination pulses (180 ps). Displacement sensitivity of...

  • Laser-optical measurements of the velocities of the plasma jets formed from different gases in a kilojoule-range plasma focus facility. Polukhin, S.; Dzhamankulov, A.; Gurei, A.; Nikulin, V.; Peregudova, E.; Silin, P. // Plasma Physics Reports;Dec2016, Vol. 42 Issue 12, p1127 

    The velocities of the plasma jets formed from Ne, N, Ar, and Xe gases in plasma focus facilities were determined by means of laser-optical shadowgraphy of the shock waves generated at the jet leading edge. In spite of the almost tenfold ratio between the atomic weights of these gases, the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics