TITLE

Resonant ultrasound spectroscopy of cylinders over the full range of Poisson's ratio

AUTHOR(S)
Jaglinski, Tim; Lakes, Roderic S.
PUB. DATE
March 2011
SOURCE
Review of Scientific Instruments;Mar2011, Vol. 82 Issue 3, p035105
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Mode structure maps for freely vibrating cylinders over a range of Poisson's ratio, ν, are desirable for the design and interpretation of experiments using resonant ultrasound spectroscopy (RUS). The full range of isotropic ν (-1 to +0.5) is analyzed here using a finite element method to accommodate materials with a negative Poisson's ratio. The fundamental torsional mode has the lowest frequency provided ν is between about -0.24 and +0.5. For any ν, the torsional mode can be identified utilizing the polarization sensitivity of the shear transducers. RUS experimental results for materials with Poisson's ratio +0.3, +0.16, and -0.3 and a previous numerical study for ν = 0.33 are compared with the present analysis. Interpretation of results is easiest if the length/diameter ratio of the cylinder is close to 1. Slight material anisotropy leads to splitting of the higher modes but not of the fundamental torsion mode.
ACCESSION #
59744535

 

Related Articles

  • Resonant ultrasound spectroscopy of cubes over the full range of Poisson's ratio. Li, Dong; Dong, Liang; Lakes, Roderic S. // Review of Scientific Instruments;Nov2012, Vol. 83 Issue 11, p113902 

    Methods are developed for study of isotropic cubes via resonant ultrasound spectroscopy. To that end, mode structure maps are determined for freely vibrating isotropic cubes via finite element method over the full range of Poisson's ratio ν (-1 to +0.5). The fundamental torsional mode has the...

  • Bulging Deformation Prediction and Experimental Verification of Bonded Double-Layer Clad Cylinder in Rotating Compression. Sen-Chi Weng; Bor-Lih Kuo; Gow-Yi Tzou // Key Engineering Materials;2015, Vol. 661, p83 

    The objective of this study is to establish three analytical models including the Upper Bound Method (UBM), the Slab Method (SM), and the Finite Element Method (FEM) for the rotating compression of bonded double-layer clad cylinder. As for the prediction of bulging deformation, apart from the...

  • Investigation of torsional teeth stiffness and second moment of area calculations for an analytical model of spline coupling behaviour. Barrot, A.; Sartor, M.; Paredes, M. // Proceedings of the Institution of Mechanical Engineers -- Part C;Jun2008, Vol. 222 Issue 6, p891 

    Torque distribution from within spline coupling is an important matter for design engineers, who wish to study the behaviour of spline couplings. This distribution can be estimated because of an analytical equation, based on material, torsional teeth stiffness, and second moments of area of the...

  • Evaluation of defects in materials using resonant ultrasound spectroscopy. Flynn, Kevin; Radovic, Miladin // Journal of Materials Science;Apr2011, Vol. 46 Issue 8, p2548 

    This study demonstrates the practicability of using Resonant Ultrasound Spectroscopy (RUS) in combination with Finite Element Analysis (FEA) as a non-destructive technique for determining the size and location of defects in axisymmetrical samples of known geometry, mass, and elastic constants....

  • Acoustic metamaterial behavior of three-dimensional periodic architectures assembled by robocasting. Kruisová, Alena; Seiner, Hanuš; Sedlák, Petr; Landa, Michal; Román-Manso, Benito; Miranzo, Pilar; Belmonte, Manuel // Applied Physics Letters;11/24/2014, Vol. 105 Issue 21, p1 

    Ultrasonic measurements combined with numerical modelling are used to analyze the elastic and acoustic properties of morphologically complex ceramic bodies assembled by the Robocasting technique. It is shown that the micromechanics of the robocast periodic scaffolds leads to several...

  • Exact 3D Saint Venant type solutions for piezoelectric d shear-mode bi-morph and sandwich torsion actuation and sensing problems. Krommer, Michael; Berik, Pelin; Benjeddou, Ayech // Acta Mechanica;Nov2013, Vol. 224 Issue 11, p2505 

    This paper is concerned with the analysis of two types of piezoelectric torsion transducers using the d-effect of mono-morph piezoelectric materials. The first problem is concerned with a bi-morph transducer made of two identical mono-morph straight rods, which are perfectly bonded to each other...

  • INFLUENCE OF CEMENTATION MATERIALS IN THE STRESS DISTRIBUTION OF AN UPPER CENTRAL INCISOR RESTORED WITH POSTS. A FINITE ELEMENT ANALYSIS. Mendoza, Martha Orozco; Ossa, Junes Abdul Villarraga; Correa, Federico Latorre; Restrepo, Julio C�sar Escobar // Revista Facultad de Odontolog�a Universidad de Antioquia;dic2011, Vol. 23 Issue 1, p56 

    Introduction: in order to improve predictability of dental restorations, new cement materials with different mechanical and physical properties are frequently developed. The purpose of this study was to evaluate and analyze the influence of cement materials in the distribution of stresses in an...

  • Non-ideal effects in indentation testing of soft tissues. Finan, John; Fox, Patrick; Morrison, Barclay // Biomechanics & Modeling in Mechanobiology;Jun2014, Vol. 13 Issue 3, p573 

    Indentation has several advantages as a loading mode for determining constitutive behavior of soft, biological tissues. However, indentation induces a complex, spatially heterogeneous deformation field that creates analytical challenges for the calculation of constitutive parameters. As a...

  • A precise correcting method for the study of the superhard material using nanoindentation tests. Yan Ping Cao; Ming Dao; Jian Lu // Journal of Materials Research;May2007, Vol. 22 Issue 5, p7 

    The accurate description of the indentation load-displacement relationship of an elastic sharp indenter indenting into an elastic half-space is critical for analyzing the nanoindentation data of superhard materials using the procedure proposed by Oliver and Pharr [J. Mater. Res. 7, 1564 (1992)]....

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics