TITLE

Combined ultrasonic elastic wave velocity and microtomography measurements at high pressures

AUTHOR(S)
Kono, Yoshio; Yamada, Akihiro; Wang, Yanbin; Yu, Tony; Inoue, Toru
PUB. DATE
February 2011
SOURCE
Review of Scientific Instruments;Feb2011, Vol. 82 Issue 2, p023906
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Combined ultrasonic and microtomographic measurements were conducted for simultaneous determination of elastic property and density of noncrystalline materials at high pressures. A Paris-Edinburgh anvil cell was placed in a rotation apparatus, which enabled us to take a series of x-ray radiography images under pressure over a 180° angle range and construct accurately the three-dimensional sample volume using microtomography. In addition, ultrasonic elastic wave velocity measurements were carried out simultaneously using the pulse reflection method with a 10° Y-cut LiNbO3 transducer attached to the end of the lower anvil. Combined ultrasonic and microtomographic measurements were carried out for SiO2 glass up to 2.6 GPa and room temperature. A decrease in elastic wave velocities of the SiO2 glass was observed with increasing pressure, in agreement with previous studies. The simultaneous measurements on elastic wave velocities and density allowed us to derive bulk (Ks) and shear (G) moduli as a function of pressure. Ks and G of the SiO2 glass also decreased with increasing pressure. The negative pressure dependence of Ks is stronger than that of G, and as a result the value of Ks became similar to G at 2.0-2.6 GPa. There is no reason why we cannot apply this new technique to high temperatures as well. Hence the results demonstrate that the combined ultrasonic and microtomography technique is a powerful tool to derive advanced (accurate) P-V-Ks-G-(T) equations of state for noncrystalline materials.
ACCESSION #
58700470

 

Related Articles

  • ONION LIKE STRUCTURES PRODUCED FROM FULLERITES C60, C70 AND NANODIAMONDS. BAGRAMOV, R. Kh.; DUBITSKIY, G. A.; SEREBRYANAYA, N. R.; PAKHOMOV, I. V.; POLYAKOV, E. V.; KRAVCHUK, K. S.; BLANK, V. D. // Izvestiya Vysshikh Uchebnykh Zavedenii. Seriya Khimiya i Khimich;2013, Vol. 56 Issue 5, p36 

    A two-step production method for compact onion-like carbon was proposed: 1) starting materials are produced by the high isostatic pressure treatment of the C60, C70 fullerites or by the vacuum thermal treatment of the nanodiamonds; 2) treatment of the starting materials in the high-pressure...

  • High pressure, mechanical, and optical properties of ZrW2O8. Ramzan, M.; Luo, W.; Ahuja, R. // Journal of Applied Physics;Feb2011, Vol. 109 Issue 3, p033510 

    In this paper, we present the high pressure studies of well known negative thermal expansion material ZrW2O8 on the basis of our density functional theory calculations. We reproduce the experimental α and γ crystal structures of ZrW2O8. We calculate the transition pressure (from α to...

  • Measurements of in-situ wave velocities of concrete using transient elastic waves. Wu, T.-T.; Tong, J.-H.; Liu, P.-L. // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p1693 

    In this paper, a portable transient elastic wave system for measuring the wave velocities of concrete has been developed. The principle of the measurement technique is based on the measurements of horizontally polarized surface responses. The Portable system consist of a portable PC, a sampling...

  • Physico-chemical characterisation of zirconium-based self-bonded ETS-4 pellets. Vuono, D.; Guzzo, M.; Luca, P.; Nagy, J. // Journal of Thermal Analysis & Calorimetry;Apr2014, Vol. 116 Issue 1, p169 

    This paper reports a study of ETS-4 based self-bonded pellets, with several amounts of Zr moles in initial gel. The following gel composition is used: xNaO-0.6KF-1.28 xHCl- yZrO-0.2TiO-1.49SiO-39.5HO with 0.5 ≤ x ≤ 2.5 and 0.015 ≤ y ≤ 0.12. The characterisation of...

  • The Mathematical Model of Reflection and Refraction of the Longitudinal Shock Wave at the Interface of Two Nonlinear Elastic Media. Dudko, Olga V.; Shtuka, Victor I. // Key Engineering Materials;2016, Vol. 685, p51 

    The results of mathematical modeling of the dynamic interaction of a plane longitudinal shock wave with a plane interface between two isotropic nonlinear elastic materials are presented. The mechanical properties of deformable solid are given by the elastic Murnaghan model. The dynamic processes...

  • Preparation and study the mechanical properties of HEC/PVA composites by sound waves. Al-Bermany, Abdul-Kareem J. // Advances in Physics Theories & Applications;2013, Vol. 15, p21 

    The HEC/PVA composite membranes of hydroxyethyl cellulose and poly vinyl alcohol were prepared by casting method, the appropriate weight of HEC was variable (0.1, 0.15, 0.2, 0.25 and 0.3 gm) dissolved in (25ml) of distilled water under stirring and heat (70°C) for (30 min.) then add the PVA...

  • Study the Rheological and Mechanical Properties of PVA/CuCl2 by Ultrasonic. Rashid, Abdul-Kareem Jawad; Kadem, Burak Yahya; Naser, Lamis F. // Chemistry & Materials Research;2012, Vol. 2 Issue 1, p19 

    Some of physical properties of polyvinyl alcohol dissolves in distilled water had been studied before and after adding different weights of copper (II) chloride (CuCl2), the Rheological properties shows that the densities variation are intangible and shear viscosity are responsible for reducing...

  • Properties of binary mixtures based on thermoplastic polyurethanes and polyolefins. Anisimov, V. N. // Polymer Journal (18181724);2012, Vol. 34 Issue 3, p270 

    The relationship of strength, deformational and tribological characteristics of binary mixtures based on thermoplastic polyurethanes and polyolefins is examined. A significant change in properties throughout all the concentration range is fixed and the optimum composition is determined.

  • Solidification Behavior of Intensively Sheared Hypoeutectic Al-Si Alloy Liquid. Kotadia, H.; Hari Babu, N.; Zhang, H.; Arumuganathar, S.; Fan, Z. // Metallurgical & Materials Transactions. Part A;Apr2011, Vol. 42 Issue 4, p1117 

    The effect of the processing temperature on the microstructural and mechanical properties of Al-Si (hypoeutectic) alloy solidified from intensively sheared liquid metal has been investigated systematically. Intensive shearing gives a significant refinement in grain size and intermetallic...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics