TITLE

Measurements of Surge Currents and Potentials in a Radio Base Station for Estimation of Lightning Threat

PUB. DATE
January 2011
SOURCE
Electronics & Electrical Engineering;2011, Issue 107, p93
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
58658736

 

Related Articles

  • Circuit model and parasitic parameter extraction of the spark plug in the ignition system. Quandi Wang; Yali Zheng; Jihui Yu; Jin Jia // Turkish Journal of Electrical Engineering & Computer Sciences;Sep2012, Vol. 20 Issue 5, p805 

    This paper presents a circuit model of the spark plug in the ignition system for conducted electromagnetic interference (EMI). Based on the spark plug's current discharge channel, the circuit model of the spark plug is established with the parasitic parameters and the air-gap model. The...

  • Thermal Analysis of the Current Path from Circuit Breakers Using Finite Element Method. Plesca, Adrian T. // World Academy of Science, Engineering & Technology;2012, Issue 72, p1736 

    This paper describes a three-dimensional thermal model of the current path included in the low voltage power circuit breakers. The model can be used to analyse the thermal behaviour of the current path during both steady-state and transient conditions. The current path lengthwise temperature...

  • Mutator-Based Meminductor Emulator for Circuit Applications. Sah, Maheshwar; Budhathoki, Ram; Yang, Changju; Kim, Hyongsuk // Circuits, Systems & Signal Processing;Aug2014, Vol. 33 Issue 8, p2363 

    A mutator-based meminductor emulator whose inductance can be varied by an external current source is proposed. The implementation of a meminductor emulator is very important, since real meminductors are not physically realizable with current technology. Though there is active research on...

  • A transformer type fault current limiter with spark gap. Xiaoqing, Zhang; Li, Ming // Electrical Engineering;Jun2010, Vol. 92 Issue 1, p1 

    A novel fault current limiter (FCL) is proposed in this paper. The FCL consists of a capacitor, a transformer and a spark gap. The spark gap is used to control the inductive reactance of the transformer for matching the capacitive reactance of the capacitor. During the short-circuit faults, the...

  • Current Conveyor Based CMOS Sinusoidal Oscillator. Kumar, Alok; Ghosh, Mourina; Ranjan, Ashish; Paul, Sajal K. // Journal of Active & Passive Electronic Devices;2012, Vol. 7 Issue 1/2, p173 

    A sinusoidal oscillator circuit based on current controlled current conveyors (CCCII) has been analysed. The CCCII has been implemented using the 0.35 µm CMOS technology. The circuit contains two CCCIIs and two capacitors. The capacitors of the circuit are grounded and the frequency of...

  • Voltage Balance Modeling in Single-Leg Flying Capacitor Multicell Converters Employing a Balance Booster Circuit. Dargahi, Saeedeh; Abarzadeh, Mostafa; Sadigh, Arash Khoshkbar; Dargahi, Vahid // International Review of Electrical Engineering;Jul/Aug2012, Vol. 7 Issue 4, p4697 

    This paper provides a mathematical model for voltage natural balancing process in single-leg flying capacitor multicell converters by taking into account the balance booster circuit effect. The analysis leads to state-space model of the converter. This analytic model of the flying capacitor...

  • Current-Mode Sixth-Order Elliptic Band-Pass Filter Using MCDTAs. Yongan LI // Radioengineering;Sep2011, Vol. 20 Issue 3, p645 

    In this paper, a modified CDTA (MCDTA ) is presented and the current-mode second-order band-pass, high-pass notch, and low-pass notch circuits using MCDTAs are given. Moreover, a current-mode sixth-order elliptic band-pass filter is realized by means of cascade method. Having used six MCDTAs,...

  • Simulator Based Device Sizing Technique For Operational Amplifiers. TODANI, RISHI; MAL, ASHIS KUMAR // WSEAS Transactions on Circuits & Systems;2014, Vol. 13 Issue 1, p11 

    In this work, design of CMOS operational amplifiers (opamps) is discussed using a new technique of transistor sizing, called as Potential Distribution Method (PDM). PDM is a technique proposed to simplify analog design and is primarily based on voltage and current distribution at different nodes...

  • Grasp Ground Concepts In EM Simulators.  // Microwaves & RF;Jul2010, Vol. 49 Issue 7, p94 

    The article reports on the research report by John M. Dunn which clarifies the relevance of grounding implementation in electromagnetic (EM) simulation. It notes that the 11-page white paper "Understanding Grounding Concepts in EM Simulators" fully explains the grounding connections in EM...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics