TITLE

Experimental study on the behaviour of nonductile infilled RC frames strengthened with external mesh reinforcement and plaster composite

PUB. DATE
November 2010
SOURCE
Natural Hazards & Earth System Sciences;2010, Vol. 10 Issue 11, p2305
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
58621714

 

Related Articles

  • Behavior of precast ferrocement thin walls under cyclic loading: an experimental and analytical study. Bedoya-Ruiz, D.; Ortiz, G. A.; Álvarez, D. A. // Revista Ingeniería e Investigación;Apr2014, Vol. 34 Issue 1, p29 

    Thin ferrocement walls are the structural elements that comprise the earthquake resistant system of housing built with this material. This article presents the results drawn from an experimental campaign carried out over full-scale precast ferrocement thin walls, which were assessed under cyclic...

  • A fuzzy logic approach to predict seismic ductility and shear strength of reinforced concrete elements. Elmenshawi, Abdelsamie; Brown, Tom; Shrive, Nigel // Canadian Journal of Civil Engineering;Sep2010, Vol. 37 Issue 9, p1232 

    Structures require ductility to withstand severe earthquake-induced loads and remain standing. A new method for modelling seismic displacement ductility is proposed here, in which a fuzzy inference system is utilized to include the uncertainty in the parameters that influence this behaviour. The...

  • Seismic response of structural walls: recent developments. Paulay, T // Canadian Journal of Civil Engineering;Dec2001, Vol. 28 Issue 6, p922 

    It is postulated that for purposes of seismic design, the ductile behaviour of lateral force-resisting wall components, elements, and indeed the entire system can be satisfactorily simulated by bilinear force–displacement modeling. This enables displacement relationships between the...

  • Experimental Study on behavior of Interior RC Beam Column Joints Subjected to Cyclic Loading. Rajaram, P.; Murugesan, A.; Thirugnanam, G. S. // International Journal of Applied Engineering Research (0976-4259;2010, Vol. 1 Issue 1, p49 

    Beam column joint is an important component of a reinforced concrete moment resisting frame and should be designed and detailed properly, especially when the frame is subjected to earthquake loading. Failure of beam column joints during earthquake is governed by bond and shear failure mechanism...

  • Reliability Analysis for Seismic Performance Assessment of Concrete Reinforced Buildings. El Ghoulbzouri, Abdelouafi; Khamlichi, Abdellatif; Bezzazi, Mohamed; López, Almansa Francisco // Australian Journal of Basic & Applied Sciences;2009, Vol. 3 Issue 4, p4484 

    Evaluation of seismic performance of buildings is considered in this work. Surface response concept is used to derive explicitly the failure function in order to assess reliability of seismic design durability of reinforced concrete buildings. The failure function is considered to be the...

  • Reducing Steel Congestion without Violating Seismic Performance Requirements. Kotsovos, Gerasimos M.; Vougioukas, Emmanuel; Kotsovos, Michael D. // ACI Structural Journal;May/Jun2013, Vol. 110 Issue 3, p427 

    This paper is concerned with an experimental investigation of the behavior of reinforced concrete (RC) beam-column specimens subjected to cyclic loading combined with a constant axial force. The specimens have the same geometry and longitudinal reinforcement but differ , on one hand, in that the...

  • Cyclic Loading Test for Beam-Column Connection with Prefabricated Reinforcing Bar Details. Tae-Sung Eom; Jin-Aha Song; Hong-Gun Park; Hyoung-Seop Kim; Chang-Nam Lee // ACI Structural Journal;May/Jun2013, Vol. 110 Issue 3, p403 

    A Prefabricated Reinforcing Bar Construction (PRC) Method was developed for fast construction and cost savings. In this study, a prefabricated reinforcing bar connection method for the earthquake design of beam-column connections was developed. Three interior and one exterior full-scale...

  • Shear and Flexural Stiffnesses of Reinforced Concrete Shear Walls Subjected to Cyclic Loading. Tang, T. O.; Su, R. K. L. // Open Construction & Building Technology Journal;2014, Vol. 8, p104 

    Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations....

  • DOLGU DUVARLARI ÖNÃœRETIMLI BETON PANELLERLE GÜÇLENDÄ°RÄ°LMÄ°Åž BETONARME ÇERÇEVELERÄ°N DEPREM DAVRANIÅžININ Ä°NCELENMESÄ°. Sezer, Rıfat; Akın, Arife // e-Journal of New World Sciences Academy (NWSA);2011, Vol. 6 Issue 4, p1127 

    The strengthening of infill walls, a strengthening method for reinforced concrete buildings against earthquakes, can become an effective strengthening method when the number of members that should be repaired individually was high and the stiffness of the lateral load-carrying system was low. In...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics