TITLE

Effect of High-Pressure Coolant on Temperature, Chip, Force, Tool Wear, Tool Life and Surface Roughness in Turning AISI 1060 Steel

AUTHOR(S)
Kamruzzaman, M.; Dhar, Nikhil Ranjan
PUB. DATE
October 2009
SOURCE
Gazi University Journal of Science;Oct2009, Vol. 22 Issue 4, p359
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Metal cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions. The use of cutting fluid generally causes economy of tools and it becomes easier to keep tight tolerances and to maintain workpiece surface properties without damages. However, the conventional types and methods of application of cutting fluid have been found to become less effective with the increase in cutting speed and feed when the cutting fluid cannot properly enter the chip-tool interface to cool and lubricate due to bulk plastic contact of the chip with the tool rake surface. Besides that, often in high production machining the cutting fluid may cause premature failure of the cutting tool by fracturing due to close curling of the chips and thermal shocks. Because of them some alternatives has been sought to minimize these problems. Some of these alternatives are cryogenic machining, minimum quantity lubricant machining and machining with high-pressure coolant jet. This paper deals with experimental investigation on the role of high-pressure coolant on cutting temperature, chips, cutting forces, tool wear, tool life and surface finish in turning of AISI 1060 steel at industrial speed-feed combinations by uncoated carbide inserts. The encouraging results include significant reduction in cutting forces, tool wear, surface roughness and significant improvement in tool life by high-pressure coolant jet mainly through reduction in the cutting zone temperature and favorable change in the chip-tool and work-tool interaction.
ACCESSION #
58495163

 

Related Articles

  • TURNING OF HIGH QUALITY ALUMINIUM ALLOYS WITH MINIMUM COSTS. Reibenschuh, Marko; Cus, Franc; Zuperl, Uros // Tehnicki vjesnik / Technical Gazette;Jul-Sep2011, Vol. 18 Issue 3, p363 

    Turning is one of the most common metal cutting procedures used. To optimize such a cutting process, some adaption must be made. Implementing tool wear conditioning and the use of dry cutting can significantly lower the production cost. This research focuses on the cost effectiveness of using...

  • Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle mill. Huang, Panling; Li, Jianfeng; Sun, Jie; Ge, Maojie // International Journal of Advanced Manufacturing Technology;Jan2012, Vol. 58 Issue 1-4, p153 

    Chatter may cause fast wear of tools and poor surface quality of the workpieces at high cutting speed and it will happen on different process parameters; how do we select the suitable cutting speed to suppress the chatter? In this paper, a signal analysis method for milling force and...

  • Sinking EDM in water-in-oil emulsion. Zhang, Yanzhen; Liu, Yonghong; Ji, Renjie; Cai, Baoping; Shen, Yang // International Journal of Advanced Manufacturing Technology;Mar2013, Vol. 65 Issue 5-8, p705 

    In this paper, a new type of sinking electric discharge machining (EDM) dielectric-water-in-oil (W/O) emulsion is proposed, and the machining characteristics of W/O emulsion are investigated by comparing with that of kerosene. In the experiments, machining parameters such as the dielectric type,...

  • A study on the die-sinking micro-electrical discharge machining of EN-24 die steel using various electrode materials. Kadirvel, A.; Hariharan, P.; Mudhukrishnan, M. // Advanced Materials Research;2014, Vol. 984-985, p73 

    Micro-EDM is an extensively used machining process for the fabrication of micro-holes with various advantages resulting from its characteristics of non-contact and thermal process. In this micro-fabrication technique, processing parameters greatly affect processing efficiency and stability. An...

  • Optimization of Multi-performance Characteristics for a Hybrid Process of EDM and AJM Using Grey Relational Analysis. Yan-Cherng Lin; Jung-Chou Hung; A-Cheng Wang; Han-Ming Chow // Applied Mechanics & Materials;2015, Vol. 789-790, p100 

    The aim of this study is to optimize the process variables of a novel hybrid process of electrical discharge machining (EDM) and abrasive jet machining (AJM) using grey relational analysis. The multi-performance characteristics associated with the developed hybrid process such as the material...

  • A review on recent developments in machining methods based on electrical discharge phenomena. Shabgard, Mohammad; Gholipoor, Ahad; Baseri, Hamid // International Journal of Advanced Manufacturing Technology;Nov2016, Vol. 87 Issue 5-8, p2081 

    The process of electrical discharge machining (EDM) is one of the modern machining processes that machining stiff and high-strength parts such as ceramics and heat-treated steels, which traditional methods cannot be successful in their materials removal, is the most important applications of the...

  • Experimental investigation on performance of different tool movement strategies in EDM process for boring operation. Kumar, Sudhanshu; Dave, Harshit; Desai, Keyur // International Journal of Advanced Manufacturing Technology;Nov2016, Vol. 87 Issue 5-8, p1609 

    In the present paper, experimental study on boring operation in electro-discharge machining (EDM) has been carried out. Boring operation is used to enlarge internal diameter of a circular cavity. The internal diameter of a predrilled circular cavity has been enlarged using three different tool...

  • An Investigation of Optimum Cutting Conditions in Face Milling Mold Steel Affect the Surface Roughness and Tool Wear. Rawangwong, Surasit; Boonchouytan, Worapong; Chatthong, Jaknarin; Burapa, Romadorn // Advanced Materials Research;2014, Issue 931-932, p354 

    The purpose of this research was to investigate the effect of the main factors on the surface roughness in mold steels face milling by carbide tool for results obtained from the analysis used in the manufacture of molds and other parts of the industry. The etching experiment using semi-automated...

  • The Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-Sinking. Ali, MOHD Amran; Suraya, LAILY; Aisyah, FATIN; Hussein, NUR Izan Syahriah; Muhamad, MOHD Razali; Bukhari, MANSHOOR; Amri, LAJIS Mohd; Izamshah, RAJA; Hadzley, Mohd; Taufik // Applied Mechanics & Materials;2014, Vol. 660, p43 

    This paper investigates the performance of brass electrode on the removal of aluminium alloys LM6 (Al-Sil2) in an electrical discharge machining (EDM) die-sinking. The machining parameters such as pulse-on time, pulse-off time and peak current were selected to find the responses on the material...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics