TITLE

Producing Magnesium Metallic Glass By Disintegrated Melt Deposition

AUTHOR(S)
Shanthi, M.; Gupta, M.; Jarfors, A. E. W.; Tan, M. J.
PUB. DATE
January 2011
SOURCE
AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p781
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Bulk metallic glasses are new class of engineering materials that exhibit high resistance to crystallization in the under cooled liquid state. The development of bulk metallic glasses of thickness 1cm or less has opened new doors for fundamental studies of both liquid state and glass transition previously not feasible in metallic materials. Moreover, bulk metallic glasses exhibit superior hardness, strength, specific strength, and elastic strain limit, along with good corrosion and wear resistance. Thus they are potential candidates in various sports, structural, engineering and medical applications. Among several BMGs investigated, magnesium-based BMGs have attracted considerable attention because of their low density and superior mechanical properties. The major drawback of this magnesium based BMGs is poor ductility. This can be overcome by the addition of ductile particles/reinforcement to the matrix. In this study, a new technique named disintegrated melt deposition technique was used to synthesize magnesium based BMGs. Rods of different sizes are cast using the current method. Mechanical characterization studies revealed that the amorphous rods produced by the current technique showed superior mechanical properties.
ACCESSION #
57580899

 

Related Articles

  • Ultrahigh strength Al-based amorphous alloys containing Sc. Inoue, Akihisa; Sobu, Shintaro; Louzguine, Dmitri V.; Kimura, Hisamichi; Sasamori, Kenichiro // Journal of Materials Research;May2004, Vol. 19 Issue 5, p1539 

    Amorphous metallic alloys possess high strength characteristics, which are superior to crystalline materials. Here we report an influence of Sc addition on glass-forming ability, glass-transition behavior, supercooled liquid region, and mechanical properties of an Al84Y9Ni5Co2 glassy alloy. This...

  • Material characterization of blended epoxy resins related to fracture toughness. Haris, Andi; Adachi, Tadaharu; Hayashi, Yu; Araki, Wakako // Journal of Materials Science;Dec2007, Vol. 42 Issue 23, p9859 

    The present study describes the effect of the macromolecular modifications on the fracture toughness of an epoxy system. We synthesized epoxy networks by the reaction of diglycidyl ether of bisphenol A (DGEBA) with methyl-tetrahydro-phthalic anhydride (MTHPA), initiated by a tertiary amine....

  • EFFICIENCY OF CROSSED HELICAL GEARS WITH WHEELS MADE OF SINTERED STEEL FE1.5CR0.2MO BY APPLYING THE SINTERHARDENING TREATMENT. Miltenovic, Aleksandar; Nikolic, Vlastimir; Mitrovic, Radivoje // Transactions of FAMENA;2012, Vol. 36 Issue 2, p31 

    High demands are placed on gears made from sintered steel regarding wear, scuffing, pitting load capacity, and efficiency. The structure of sintered steel can be influenced by sinter-hardening treatment in such a way that wear load capacity and meshing efficiency can have high values. The paper...

  • Materials science: Soft is strong. Angell, C. Austen; Ueno, Kazuhide // Nature;11/5/2009, Vol. 462 Issue 7269, p45 

    The article presents a study which explores the connection between the pattern of strength and fragility of glass-forming liquids and colloidal suspension. It notes that Mattsson and colleagues observed that the suspended particles of colloids are as solid as rock while the relaxation times of...

  • Isotope effect on the glass transition and crystallization of hyperquenched glassy water. Johari, G. P.; Hallbrucker, Andreas; Mayer, Erwin // Journal of Chemical Physics;6/1/1990, Vol. 92 Issue 11, p6742 

    The thermal behavior of hyperquenched glassy D2O was investigated by differential scanning calorimetry from 103 to 250 K, in order to investigate the isotope effect on the glass→liquid transition and on the liquid to cubic, and cubic to hexagonal ice. For a heating rate of 30 K min-1 the...

  • Nanocrystallization of hydrogen-charged Mg76Ni19Y5 amorphous alloy. Rangelova, V.; Spassov, T.; Neykov, N. // Journal of Thermal Analysis & Calorimetry;2004, Vol. 75 Issue 1, p373 

    The crystallization of a hydrogen-charged melt-spun Mg76Ni19Y5 amorphous alloy was studied in order to understand the influence of hydrogen absorbed on the crystallization kinetics and mechanism. Hydrogenation does not affect the thermal stability, but decreases significantly the enthalpy of...

  • Atomic packing in Mg61Cu28Gd11 bulk metallic glass. Wang, X. D.; Lou, H. B.; Wang, S. G.; Xu, J.; Jiang, J. Z. // Applied Physics Letters;1/17/2011, Vol. 98 Issue 3, p031901 

    Atomic configurations of an Mg61Cu28Gd11 bulk metallic glass and its molten state have been investigated. The supercooled liquid and melt have a volume expansion coefficient only two times as large as that below glass transition temperature. Although the dominant polyhedra are 12- and...

  • ROLE OF MANGANESE ON GLASS FORMING ABILITY, HARDNESS, FRAGILITY, GLASS ACTIVATION ENERGY AND STABILITY OF SODIUM-ALUMINO-SILICATE GLASSES. Soliman, A. A.; Sakr, E. M.; Ratep, A.; Kashif, I. // Armenian Journal of Physics;2010, Vol. 3 Issue 3, p218 

    Differential thermal analysis (DTA) under non-isothermal conditions, density and Vicker's hardness techniques have been employed to investigate the effect of different MnO2 contents on the thermal transitions data, hardness, Hv, glass-forming ability, GFA, stability, GS, fragility, Fi and...

  • Tailoring sodium silicophosphate glasses containing SiO6-octahedra through structural rules and topological principles. Qi Jiang; Huidan Zeng; Xiang Li; Jing Ren; Guorong Chen; Fude Liu // Journal of Chemical Physics;9/28/2014, Vol. 141 Issue 12, p1 

    SiO4 tetrahedra in certain sodium silicophosphate glasses can be transformed into SiO6 octahedra that determine the macroscopic properties of silicophosphate glasses to a large extent. In this study, we develop the quantitative evolution rule of each network former. In addition, based on the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics