TITLE

Effects of fission product accumulation in cubic zirconia

AUTHOR(S)
Wang, L. M.; Wang, S. X.; Zhu, S.; Ewing, R. C.
PUB. DATE
July 2000
SOURCE
AIP Conference Proceedings;2000, Vol. 532 Issue 1, p95
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Yttria stabilized cubic-zirconia (YSZ) is a promising candidate material for both inert matrix fuel and waste form based on its high solubility for actinides, high chemical durability and its reported exceptional stability under radiation. Because the incorporation of fission and other transmutation products during burnup may significantly affect the radiation response and the chemical durability of cubic zirconia, the solubility and mobility of the fission product nuclides in the inert matrix fuel at high temperatures (reactor fuel conditions) and low temperatures (repository conditions) are important. © 2000 American Institute of Physics.
ACCESSION #
5663261

 

Related Articles

  • Characterization of epitaxial yttria-stabilized zirconia/Si interface by ion beam channeling. Fukumoto, H.; Yamamoto, M.; Osaka, Y. // Journal of Applied Physics;6/15/1991, Vol. 69 Issue 12, p8130 

    Deals with a study which analyzed the interface structure of yttria-stabilized zirconia/silicon and Y[sub2]O[sub3]/silicon using ion beam channeling techniques. Experimental procedures; Description of the cross-sectional transmission electron microscopy image of yttria-stabilized zirconia;...

  • Early stages of growth of YBa2Cu3O7-δ high Tc superconducting films on (001) Y-ZrO2 substrates. Alarco, J. A.; Brorsson, G.; Olin, H.; Olsson, E. // Journal of Applied Physics;3/15/1994, Vol. 75 Issue 6, p3202 

    Provides information on a study which examined the growth of high quality superconducting films YBa[sub2]Cu[sub3]O[sub7-δ] on yttrium zirconium oxide substrates. Application of transmission electron microscopy; Results and discussion; Conclusions.

  • Improved crystalline quality of Si[sub 1-x]Ge[sub x] formed by low-temperature germanium ion.... Shoji, Ken-ichi; Fukami, Akira // Applied Physics Letters;1/27/1992, Vol. 60 Issue 4, p451 

    Examines the crystalline quality of Si[sub 1-x]Ge[sub x] formed by germanium ion implantation. Characterization of p-n junction diodes in SiGe layer; Reduction of end-of-range defects; Use of transmission electron microscopy for electrical characterization of the diodes.

  • Gettering of nickel to cavities in silicon introduced by hydrogen implantation. Mohadjeri, B.; Williams, J.S. // Applied Physics Letters;4/10/1995, Vol. 66 Issue 15, p1889 

    Examines the complete nickel gettering of silicon cavities. Implantation of hydrogen ions and thermal annealing on silicon cavities; Use of transmission electron microscopy; Discussion on the diffusion and solubility of nickel in silicon; Formation of NiSi[sub 2] precipitates.

  • Technique to suppress dislocation formation during high-dose oxygen implantation of Si. Holland, O.W.; Thomas, D.K. // Applied Physics Letters;4/10/1995, Vol. 66 Issue 15, p1892 

    Presents a practical technique for suppressing dislocation formation during high-dose oxygen implantation of single-crystal silicon. Use of transmission electron microscopy and Rutherford backscattering/channeling spectrometry; Elimination of vacancy defects and concomitant strain in the...

  • Transmission electron microscopy observation of lateral order/disorder structures in (Al)GaInP. Burkard, M.; Geng, C. // Applied Physics Letters;3/10/1997, Vol. 70 Issue 10, p1290 

    Examines lateral order/disorder structures in (Al)GaInP using dark-field transmission electron microscopy. Reduction of temperature threshold for thermal disordering by ion implantation damaging of ordered (Al)GaInP; Realization of lateral order/disorder structures smaller than 200 nm;...

  • Dislocation formation related with high oxygen dose implantation on silicon. Stoemenos, J.; Reeson, K. J.; Robinson, A. K.; Hemment, P. L. F. // Journal of Applied Physics;1/15/1991, Vol. 69 Issue 2, p793 

    Presents a study which examined the generation of dislocations in silicon implanted by oxygen (SIMOX) by transmission electron microscopy. Separation of the effects of displacement damage caused by ion implantation from the dynamic structural transformation; Effect of surface contamination on...

  • Effects of amorphizing species’ ion mass on the end-of-range damage formation in silicon. Clark, Mark H.; Jones, Kevin S.; Haynes, Tony E.; Barbour, Charles J.; Minor, Kenneth G.; Andideh, Ebrahim // Applied Physics Letters;6/3/2002, Vol. 80 Issue 22, p4163 

    The effects of preamorphizing ion mass on the end-of-range (EOR) damage and subsequent enhanced diffusivity have been investigated. Amorphizing silicon with implants of 22 keV [sup 28]Si[sup +], 32 keV [sup 73]Ge[sup +], 40 keV [sup 119]Sn[sup +], and 45 keV[sup 207]Pb[sup +] provided the mass...

  • Study of reactive-ion-etch-induced lattice damage in silicon by Ar, CF4, NF3, and CHF3 plasmas. Connick, I-Wen H.; Bhattacharyya, Anjan; Ritz, Kenneth N.; Smith, W. Lee // Journal of Applied Physics;8/15/1988, Vol. 64 Issue 4, p2059 

    Presents information on a study which investigated reactive-ion-etch-induced damage in silicon. Preparation of wafers for oxide leakage current measurements; Results of transmission electron microscopy; Thermal wave results.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics