TITLE

Development of electron cyclotron emission imaging system on Large Helical Device

AUTHOR(S)
Kuwahara, D.; Tsuji-Iio, S.; Nagayama, Y.; Yoshinaga, T.; Tsuchiya, H.; Sugito, S.; Yamaguchi, S.; Kogi, Y.; Akaki, K.; Mase, A.
PUB. DATE
October 2010
SOURCE
Review of Scientific Instruments;Oct2010, Vol. 81 Issue 10, p10D919
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A combined system of microwave imaging reflectometry and electron cyclotron emission (ECE) imaging has been developed for the Large Helical Device. This system includes a wide-band two-dimensional horn-antenna mixer array (HMA). The HMA consists of horn antennas, waveguides, mixers, and intermediate frequency circuits. The frequency response of the HMA is between 50 and 110 GHz. The ECE signal is selected using a 95 GHz local oscillator and a 93 GHz high-pass filter.
ACCESSION #
54858053

 

Related Articles

  • A mode converter to generate a Gaussian-like mode for injection into the VENUS electron cyclotron resonance ion source. Lyneis, C.; Benitez, J.; Hodgkinson, A.; Plaum, B.; Strohmeier, M.; Thuillier, T.; Todd, D. // Review of Scientific Instruments;2014, Vol. 85 Issue 2, p1 

    A number of superconducting electron cyclotron resonance (ECR) ion sources use gyrotrons at either 24 or 28 GHz for ECR heating. In these systems, the microwave power is launched into the plasma using the TE01 circular waveguide mode. This is fundamentally different and may be less efficient...

  • Characterization and stabilization of an electron-cyclotron resonance plasma source using an automatic microwave tuner. Minomo, S.; Kondo, K.; Yoshizako, Y.; Ishida, Y.; Taniguchi, M. // Review of Scientific Instruments;Apr92, Vol. 63 Issue 4, p2547 

    An automatic microwave stub tuner (AST) has been developed and used to characterize and stabilize an electron-cyclotron resonance (ECR) plasma source. The tuner provides a new method for measuring plasma impedance dynamically without disturbing the plasma. The Ar ECR plasmas were excited by a...

  • Status of the Calcultta K500 superconducting cyclotron project. Bhandari, R. K. // AIP Conference Proceedings;2001, Vol. 600 Issue 1, p84 

    The superconducting cyclotron under construction at this Centre has K[bend]=520 and K[sub foc]=160. Several parts of the main magnet frame have already been machined. They are undergoing inspection tests at the vendor's site. Trial windings on a full-scale dummy bobbin are going on to perfect...

  • Cyclotron, Psychlotron—What’s in a name? Craddock, M. K. // AIP Conference Proceedings;2001, Vol. 600 Issue 1, p474 

    The names given to accelerators and their parts inspire some rambling reflexions, as do those of places and people associated with the MSU and Berkeley cyclotrons.

  • The PSI 2mA beam and future applications. Stammbach, Th.; Adam, S.; Blumer, T.; George, D.; Mezger, A.; Schmelzbach, P. A.; Sigg, P. // AIP Conference Proceedings;2001, Vol. 600 Issue 1, p423 

    The performance of the PSI cyclotron facility is described in detail. The facility consists of the 72MeV injector cyclotron and the 590MeV Ringcyclotron. It is used as a powerful driver for the routine production of a 1MW proton beam for SINQ, the spallation neutron source at PSI. In July 2000 a...

  • Construction of the RIKEN IRC. Mitsumoto, T.; Goto, A.; Kase, M.; Ohnishi, J.; Kamigaito, O.; Sakamoto, N.; Ikegami, K.; Okuno, H.; Miyazawa, Y.; Yano, Y.; Hiasa, T.; Kumata, Y. // AIP Conference Proceedings;2001, Vol. 600 Issue 1, p167 

    Construction of the RIKEN Intermediate-stage Ring Cyclotron (IRC) started in 1998. Four sector magnets are completed. Magnetic field measurement of the sector magnet is in progress. Two main resonators are assembled. Fine adjustments of the resonators are going on. Almost all the other...

  • The Warsaw K=160 cyclotron. Choinski, J.; Miszczak, J.; Sura, J. // AIP Conference Proceedings;2001, Vol. 600 Issue 1, p157 

    The overview of the Warsaw cyclotron facility is presented. The facility consists of K=160 cyclotron, 10GHz ECR ion source, and several experimental stations. The cyclotron is of compact design with 2 straight dees. A yearly operation time is about 2 900 hours on an average for the past few...

  • The 10-GHz NEOMAFIOS upgraded electron cyclotron resonance ion source. Ludwig, P.; Geller, R.; Melin, G. // Review of Scientific Instruments;Apr92, Vol. 63 Issue 4, p2892 

    After the successful development of the first NEOMAFIOS source, an ECRIS for highly charged ions at 8 GHz with a magnetic configuration obtained only with FeNdB permanent magnets, the building of an upgraded NEOMAFIOS at 10 GHz has been achieved. This source started operating a few months ago...

  • A superconducting electron cyclotron resonance source for the L.N.S. Ciavola, G.; Gammino, S. // Review of Scientific Instruments;Apr92, Vol. 63 Issue 4, p2881 

    At the "Laboratorio Nazionale del Sud" (L.N.S.) the K-800 Superconducting Cyclotron (C.S.) is under construction and by the end of 1992 it will be completed in order to work as a booster for the 15-MV Tandem. With this facility fully stripped light ions will reach 100 MeV/amu, while the heaviest...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics