TITLE

Defining the infrared systems for ITER

AUTHOR(S)
Reichle, R.; Andrew, P.; Counsell, G.; Drevon, J.-M.; Encheva, A.; Janeschitz, G.; Johnson, D.; Kusama, Y.; Levesy, B.; Martin, A.; Pitcher, C. S.; Pitts, R.; Thomas, D.; Vayakis, G.; Walsh, M.
PUB. DATE
October 2010
SOURCE
Review of Scientific Instruments;Oct2010, Vol. 81 Issue 10, p10E135
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The International Thermonuclear Experimental Reactor will have wide angle viewing systems and a divertor thermography diagnostic, which shall provide infrared coverage of the divertor and large parts of the first wall surfaces with spatial and temporal resolution adequate for operational purposes and higher resolved details of the divertor and other areas for physics investigations. We propose specifications for each system such that they jointly respond to the requirements. Risk analysis driven priorities for future work concern mirror degradation, interfaces with other diagnostics, radiation damage to refractive optics, reflections, and the development of calibration and measurement methods for varying optical and thermal target properties.
ACCESSION #
54857975

 

Related Articles

  • Modeling of the ITER-like wide-angle infrared thermography view of JET. Aumeunier, M.-H.; Firdaouss, M.; Travère, J.-M.; Loarer, T.; Gauthier, E.; Martin, V.; Chabaud, D.; Humbert, E.; JET-EFDA Contributors // Review of Scientific Instruments;Oct2012, Vol. 83 Issue 10, p10D522 

    Infrared (IR) thermography systems are mandatory to ensure safe plasma operation in fusion devices. However, IR measurements are made much more complicated in metallic environment because of the spurious contributions of the reflected fluxes. This paper presents a full predictive photonic...

  • Mid-infrared and near-infrared properties of SrTiO3 from transmission and reflection measurements. Dore, P.; Paolone, A.; Trippetti, R. // Journal of Applied Physics;11/1/1996, Vol. 80 Issue 9, p5270 

    Deals with a study which examined mid-infrared and near-infrared properties of SrTiO[sub3] from transmission and reflection measurements. Experimental details; Fitting procedures; Conclusions.

  • Online calibration of infrared binocular vision measurement system with large field of view. Chen, Yuming; Zhang, Guangming; Yuan, Yuhao // Transactions of the Institute of Measurement & Control;Jul2013, Vol. 35 Issue 5, p692 

    High-precision calibration of a binocular vision measurement system is the foundation of the precise measurement in a large field of view (FOV). Given the complexity of light variation in a variety of workplaces, an optical reference target, which has five strong reflective feature points, is...

  • 1987 calibration of the TFTR neutron spectrometers. Barnes, Cris W.; Strachan, J. D. // Review of Scientific Instruments;Sep90, Vol. 61 Issue 9, p2383 

    The 3He neutron spectrometer used for measuring ion temperatures and the NE213 proton recoil spectrometer used for triton burnup measurements were absolutely calibrated for source strength measurements with DT and DD neutron generators placed inside the TFTR vacuum vessel. Details of the...

  • The Development of in-situ Calibration Method for Divertor IR Thermography in ITER. Takeuchi, M.; Sugie, T.; Ogawa, H.; Takeyama, S.; Itami, K. // AIP Conference Proceedings;2014, Vol. 1612, p153 

    For the development of the calibration method of the emissivity in IR light on the divertor plate in ITER divertor IR thermography system, the laboratory experiments have been performed by using IR instruments. The calibration of the IR camera was performed by the plane black body in the...

  • Infrared-optical transmission and reflection measurements on loose powders. Kuhn, J.; Korder, S.; Arduini-Schuster, M. C.; Caps, R.; Fricke, J. // Review of Scientific Instruments;Sep93, Vol. 64 Issue 9, p2523 

    A method is described to determine quantitatively the infrared-optical properties of loose powder beds via directional-hemispherical transmission and reflection measurements. Instead of the integration of the powders into a potassium bromide (KBr) or a paraffin oil matrix, which would...

  • Absolute calibration of TFTR helium proportional counters. Strachan, J.D.; Barnes, Cris W.; Diesso, M.; Jassby, D.; Johnson, L.; Loughlin, M.; McCauley, S.; Munsat, T.; Roquemore, A.L. // Review of Scientific Instruments;Feb1995, Vol. 66 Issue 2, p1247 

    Reports on the calibration of the tokamak fusion test reactor (TFTR) helium proportional counters located in the central five channels of the TFTR multichannel neutron collimator and describes modifications to the detector usage. Description of the detector system; In-vessel calibration;...

  • Fabrication details, calibrations, and installation activities of magnetic diagnostics for Korea Superconducting Tokamak Advanced Research. Lee, S. G.; Bak, J. G. // Review of Scientific Instruments;Oct2006, Vol. 77 Issue 10, p10E306 

    Many magnetic diagnostics were fabricated and some of them were calibrated and installed in the Korea Superconducting Tokamak Advanced Research device. Fabrication details and results from the calibrations and installation activities are presented.

  • Thermophotovoltaic cells based on In0.53Ga0.47As/InP heterostructures. Karlina, L. B.; Vlasov, A. S.; Kulagina, M. M.; Timoshina, N. Kh. // Semiconductors;Mar2006, Vol. 40 Issue 3, p346 

    Reflection of infrared radiation from n-InP substrates with a rear MgF2/Au mirror is investigated in the wavelength range 1000�2200 nm. It is found that the reflectance weakly depends on substrate thickness and free-carrier concentration in the (0.1�6) � 1018 cm-3 range....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics