TITLE

LUMENIS GETS JAPANESE GOVERNMENT IMPORT APPROVAL

PUB. DATE
November 2001
SOURCE
Worldwide Biotech;Nov2001, Vol. 13 Issue 11, p2
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Reports on the import approval for intense pulsed light devices received by Lumenis Ltd. from the Japanese Ministry of Health, Labour and Welfare.
ACCESSION #
5457844

 

Related Articles

  • Homogeneous Electrical Explosion of Tungsten Wire in Vacuum. Sarkisov, G. S.; Bauer, B. S.; De Groot, J. S. // JETP Letters; 

    Experimental results on Joule energy deposition upon initiation of a fast electrical explosion of 16-μm tungsten wire in vacuum at current densities of more than 10[sup 8]A/cm[sup 2] are reported. We have found that explosion with a fast current rise time (∼170 A/ns into a short) results...

  • The large magnetoresistance property of La[sub 0.5]Sr[sub 0.5]CoO[sub 3-x] thin films prepared by pulsed laser deposition. Liu, J.-M.; Ong, C. K. // Applied Physics Letters;8/24/1998, Vol. 73 Issue 8 

    High-quality (001) thin film La[sub 0.5]Sr[sub 0.5]CoO[sub 3-x] (LSCO) has been prepared on (001) SrTiO[sub 3] substrates by pulsed laser deposition under different oxygen pressures with and without postannealing. C-axis expansion of the LSCO with reducing oxygen pressure was revealed. The...

  • Waveguide laser film in erbium-doped KTiOPO[sub 4] by pulsed laser deposition. Wang, Ke-Ming; Shi, Bo-Rong; Cue, Nelson; Zhu, Yong-Yuan; Xiao, Rong-Fu; Lu, Fei; Li, Wei; Liu, Yao-Gang // Applied Physics Letters;8/24/1998, Vol. 73 Issue 8 

    Erbium doping into potassium titanyl phosphate (KTiOPO[sub 4] or KTP) was performed by pulsed laser deposition. Waveguide laser film in Er-doped KTiOPO[sub 4] was formed using both KTiOPO[sub 4] and erbium as targets and optically polished KTiOPO[sub 4] as a substrate. Rutherford backscattering,...

  • Enhanced superconducting properties in ultrathin YBa[sub 2]Cu[sub 3]O[sub 7--delta] layers. Norton, David P.; Lowndes, Douglas H. // Applied Physics Letters;9/6/1993, Vol. 63 Issue 10, p1432 

    Enhances superconducting properties of ultrathin YBa[sub 2]Cu[sub 3]O[sub 7-delta] (YBCO) layers. Growth of YBCO structures using pulsed laser deposition; Observation of superconducting transition in a two unit cell thick YBCO layer; Use of reflection high energy electron diffraction in...

  • Pulsed-laser deposition of smooth high-T[sub c] superconducting films using a synchronous.... Pechen, E.V.; Varlashkin, A.V. // Applied Physics Letters;4/24/1995, Vol. 66 Issue 17, p2292 

    Describes the pulsed laser deposition of smooth high-temperature superconducting films using synchronous velocity filtration of plasma particles. Removal of particle droplets from laser-induced plasma using a shutter technique; Reduction of droplet density; Measurement of spatial distribution...

  • Stoichiometry and thickness variation of YBa[sub 2]Cu[sub 3]O[sub 7] [sub x]in off-axis pulsed.... Trajanovic, Z.; Senapati, L. // Applied Physics Letters;5/1/1995, Vol. 66 Issue 18, p2418 

    Investigates the stoichiometry and thickness variation of YBa[sub 2]Cu[sub 3]O[sub 7] [sub x]in off-axis pulsed laser deposition. Observation of a biregional drop-off in thickness with increasing axial distance; Proportionality of the thickness to the deposition pressure raised; Absence of...

  • Pulsed laser deposition of epitaxial Si/TiN/Si(100) heterostructures. Chowdhury, R.; Chen, X.; Narayan, J. // Applied Physics Letters;3/7/1994, Vol. 64 Issue 10, p1236 

    Demonstrates the pulse laser deposition of epitaxial silicon (Si)/titanium nitride (TiN)/Si(100) heterostructures. Application of the silicon-on-conductor device configuration in three-dimensional integrated circuits; Use of X-ray diffraction, Rutherford backscattering and transmission electron...

  • Development of microstructure in Cr and Cr/CoCrPt films made by pulsed laser deposition. Shima, M.; Ross, C. A. // Journal of Applied Physics;1/15/2003, Vol. 93 Issue 2, p945 

    Cr films and Cr/CoCrPt bilayer films have been grown using ion-beam-assisted pulsed laser deposition (PLD). High mobility conditions such as a substrate temperature above 350 °C, a low deposition rate, and a high laser energy promote the formation of a {100} bcc crystallographic preferred...

  • Void formation in pulsed laser induced via/contact hole filling. Marella, Paul F.; Tuckerman, David B.; Pease, R. Fabian // Applied Physics Letters;6/25/1990, Vol. 56 Issue 26, p2625 

    Metal (Au, Cu, and Al-1% Cu) layers sputter deposited over vias and contact holes of varying diameter and aspect ratio are melted and planarized by irradiation with either a 600 ns pulse duration flashlamp-pumped dye laser or a 35 ns pulse duration excimer laser. High aspect ratio (>=1) vias and...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics