TITLE

Analysis of Dental Gold Alloys

AUTHOR(S)
Swanger, William H.
PUB. DATE
December 1927
SOURCE
Journal of Dental Research;Dec1927, Vol. 7 Issue 4, p373
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Complete chemical analyses of about 40 dental gold alloys were made as part of the investigation of their physical properties. These analyses required the determination of silver, gold, platinum, palladium, iridium, rhodium, copper, zinc, nickel, tin, manganese, iron, and magnesium. Methods as found in the literature for the determination of the above-named metals were modified so as to give accurate results when applied to alloys of this type. New methods were developed for the determination of tin and iridium. Many analyses of mixtures of known composition are given to show the degree of accuracy of the methods used. These methods are assembled in a detailed procedure for the complete analysis of dental gold alloys. The composition of 13 typical alloys is given in a table (page 409).
ACCESSION #
54380449

 

Related Articles

  • Think about it.  // Quintessence International;Jan1981, Vol. 12 Issue 1, p3 

    The article talks on the costly procedures for casting gold in dentistry and how the process changes the physical properties and appearance of the material for the purpose of selling it to a user. It outlines the procedures for casting gold through alloying to produce gold alloy. It suggests...

  • The Role of Zinc in Dental Amalgams. JOHNSON, LEWIS B.; PAFFENBARGER, GEORGE C. // Journal of Dental Research;Aug1980, Vol. 59 Issue 8, p1412 

    Twenty-five Ag-Sn alloys containing various additions of Zn were amalgamated and the amalgams tested for physical properties pertinent to dental restoration use. The mercury retained, dimensional change, compressive strength, and creep were all functions of the Zn content.

  • The Chloride Corrosion of Low-Gold Casting Alloys. SARKAR, N. K.; FUYS, Jr., R. A.; STANFORD, J. W. // Journal of Dental Research;Feb1979, Vol. 58 Issue 2, p568 

    Potentiodynamic polarization measurements have indicated that the so-called 'low-gold' casting alloys are characterized by decreased chloride corrosion resistance, when compared with ADA Type III and Type IV gold alloys. This decrease in chloride corrosion resistance results apparently from the...

  • In Vitro Wear of Different Material Combinations of Intracoronal Precision Attachments. Holst, Stefan; Blatz, Markus B.; Eitner, Stephan; Wichmann, Manfred // International Journal of Prosthodontics;Jul/Aug2006, Vol. 19 Issue 4, p330 

    Purpose: This study examined the retentive forces of intracoronal precision attachments after wear cycling. Materials and Methods: Three material combinations of an intracoronal cylindric T-attachment were tested. A total of 10,000 separating and joining movements were performed, and retentive...

  • ANALYSIS OF DENTAL GOLD ALLOYS. SWANGER, WILLIAM H. // Journal of Dental Research;Dec1927, Vol. 7 Issue 4, p373 

    Complete chemical analyses of about 40 dental gold alloys were made as part of the investigation of their physical properties. These analyses required the determination of silver, gold, platinum, palladium, iridium, rhodium, copper, zinc, nickel, tin, manganese, iron, and magnesium. Methods as...

  • Evolution of Gases from High-Fusing Gold Alloys. LEINFELDER, KARL F.; FAIRHIURST, CARL W.; O'BRIEN, WILLIAM J.; RYGE, GUNNAR // Journal of Dental Research;Jul1966, Vol. 45 Issue 4, p1154 

    No abstract available.

  • Two different types of age-hardening behaviors in commercial dental gold alloys. Hisatsune, Kunihiro; Shiraishi, Takanobu; Takuma, Yasuko; Tanaka, Yasuhiro; Luciano, Rhodora // Journal of Materials Science: Materials in Medicine;Apr2007, Vol. 18 Issue 4, p577 

    Age-hardening behavior during continuous heating in commercial dental casting gold alloys was investigated by means of electrical resistivity measurements, hardness tests and X-ray diffraction. Two distinguishable behaviors were detected. It is considered that the difference was attributed to...

  • Segregation in Dental Gold Casting Alloys. EICK, JOHN DAVID; HEGDAHL, TROND // Journal of Dental Research;Nov1968, Vol. 47 Issue 6, p1118 

    The electron microprobe was used to determine concentration differences of alloys by line scanning. The coefficient of variation was used to quantitatively define the degree of segregation. Palladium was found to segregate the most; gold and platinum, the least. There was no difference in...

  • THE EFFECT OF HEAT TREATMENT VARIABLES ON THE MICROSTRUCTURE AND HARDNESS OF A CAST DENTAL GOLD ALLOY. KAIRES, ANTHONY K.; THOMPSON, JOSEPH C. // Journal of Dental Research;Sep1959, Vol. 38 Issue 5, p888 

    The article presents research examining the effect of heat treatment variables on the microstructure and hardness of cast dental gold alloy. It is noted that variations in mechanical properties in cast dental alloys have been attributed to variations of grain sizes, shrinkage porosities,...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics