David, Victor
July 2010
Industrial Laser Solutions;Jul/Aug2010, Vol. 25 Issue 4, p9
The article reports on the importance of laser scribing method. It mentions that many preferred to use the method because the laser scribe is narrower than saw cut and with less damage due to cracking and chipping. It also mentions that laser manufacturers have worked to improve the performance, reliability, and cost of ownership characteristics of the laser products to broaden its use.


Related Articles

  • Semiconductor laser based, injection locking maintaining broad linewidth generated by a direct current modulation of a master laser. Sasaki, Kohta; Yoneyama, Toshio; Nakamura, Takahiro; Sato, Shunichi; Takeyama, Akinori // Review of Scientific Instruments;Sep2006, Vol. 77 Issue 9, p096107 

    Semiconductor laser based, injection locking was performed for efficient excitation of subjects. The linewidth of the master laser was extended to 380 MHz by using a frequency modulation technique through a direct current modulation. By the injection locking technique with a broad-area...

  • High-power module based on inert gas-halogen mixtures for UV irradiation. Avdeev, S.; Skakun, V.; Sosnin, E.; Tarasenko, V.; Schitz, D. // Journal of Applied Spectroscopy;May2012, Vol. 79 Issue 2, p334 

    We have developed a module based on exciplex barrier-discharge lamps for irradiation by high-power narrow-band ultraviolet radiation. The module uses air cooling and is intended for irradiation of substrates such as those used in microelectronics. The module provides close to uniform irradiation...

  • MEMS: A Small Technology with a Huge Impact on Consumer Electronics. Dao, Ricardo; Pyle, John; Chaturvedi, Shek // ECN: Electronic Component News;Jul2002, Vol. 46 Issue 8, p76 

    Examines the impact of micromachining technology (MEMS) on consumer electronics. MEMS applications; Requirements of MEMS device; Features of Global Positioning System; Control for gaming applications.

  • Study of Low-Cost Electrical Test Strategies for Post-Silicon Yield Improvement of MEMS Convective Accelerometers. Rekik, Ahmed; Azaïs, Florence; Mailly, Frédérick; Nouet, Pascal // Journal of Electronic Testing;Feb2014, Vol. 30 Issue 1, p87 

    In this paper, different strategies for post-silicon yield improvement of MEMS convective accelerometers are explored. A key feature of the proposed strategies is that they can be implemented at low-cost using electrical test equipment since they only rely on the measurement of the relative...

  • Simple method enabling pulse on command from high power, high frequency lasers. Baer, David J.; Marshall, Graham D.; Coutts, David W.; Mildren, Richard P.; Withford, Michael J. // Review of Scientific Instruments;Sep2006, Vol. 77 Issue 9, p093103 

    A method for addressing individual laser pulses in high repetition frequency systems using an intracavity optical chopper and novel electronic timing system is reported. This “pulse on command” capability is shown to enable free running and both subharmonic pulse rate and burst mode...

  • Gateway Begins CE Changeover; Posts Q2 Loss. Olenick, Doug // TWICE: This Week in Consumer Electronics;8/4/2003, Vol. 18 Issue 16, p1 

    Focuses on the transformation of Gateway Inc. from a computer maker to a broadline consumer electronics dealer, and the financial performance of the company, as of August 4, 2003. Increase in sales of the company's non-personal computer products in the second quarter of 2003; Introduction of...

  • High power single mode operation of long cavity GaAlAs lasers with nonabsorbing mirror buried.... Naito, H.; Imafuji, O. // Applied Physics Letters;8/3/1992, Vol. 61 Issue 5, p515 

    Develops a long cavity gallium aluminum arsenide (GaAlAs) laser with nonabsorbing mirror buried twin ridge substrate structure to obtain high power single mode operation. Effect of longitudinal mode operation on spatial mode; Independence of laser on the output power; Cause for the small beam...

  • The ultrahigh-peak-power laser: present and future. Mourou, G. // Applied Physics B: Lasers & Optics;1997, Vol. 65 Issue 2, p205 

    The technique of chirped pulse amplification has revolutionized our ability to produce high-peak-power pulses. It is possible to produce with tabletop systems pulses in the 10-TW range and peak intensities in the 10[sup 19] to 10[sup 20] -W/cm[sup 2] range. With some refinements and with...

  • Terawatt lasers generate x-ray continuum from gold target. Messenger, Heather W. // Laser Focus World;Feb95, Vol. 31 Issue 2, p15 

    Describes an ultrafast broadband extreme ultraviolet laser source developed by a group of researchers for time-resolved dynamical studies. Measurement of time-resolved broadband x-ray emission from gold plasma; Tunability of the source.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics