TITLE

Design and construction of a heat stage for investigations of samples by atomic force microscopy above ambient temperatures

AUTHOR(S)
Baekmark, Thomas Rosleff; Bjornholm, Thomas; Mouritsen, Ole G.
PUB. DATE
January 1997
SOURCE
Review of Scientific Instruments;Jan1997, Vol. 68 Issue 1, p140
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Reports on the design and construction of a heat stage to be used together with a commercially available atomic force microscope for direct heating of sample and cantilever. Instrumentation; Monitoring of the ambient temperature; Atomic resolutions.
ACCESSION #
5327554

 

Related Articles

  • Thermal writing using a heated atomic force microscope tip. Mamin, H. J. // Applied Physics Letters;7/15/1996, Vol. 69 Issue 3, p433 

    Resistive heating of an atomic force microscope tip was used to perform thermally induced surface modifications. Heating was achieved by dissipating power in the legs of an electrically conducting silicon cantilever. Temperatures of up to 170 °C were obtained using 40 mW of input power....

  • A variable temperature ultrahigh vacuum atomic force microscope. Dai, Q.; Vollmer, R.; Carpick, R.W.; Ogletree, D.F.; Salmeron, M. // Review of Scientific Instruments;Nov95, Vol. 66 Issue 11, p5266 

    Describes an atomic force microscope that operates in ultrahigh vacuum (UHV). Force detection scheme; Optical alignment; Instrumentation and design; Imaging at and below room temperature.

  • High-frequency mechanical spectroscopy with an atomic force microscope. Dupas, E.; Gremaud, G.; Kulik, A.; Loubet, J.-L. // Review of Scientific Instruments;Oct2001, Vol. 72 Issue 10, p3891 

    In this article we further develop local mechanical spectroscopy and extend the frequency range over which it can be used. Using a heterodyne method to measure the deflection of the cantilever enables one to measure the probe vibration at any frequency. Since the detection sensitivity of force...

  • Calibration of atomic-force microscope tips. Hutter, Jeffrey L.; Bechhoefer, John // Review of Scientific Instruments;Jul1993, Vol. 64 Issue 7, p1868 

    Images and force measurements taken by an atomic-force microscope (AFM) depend greatly on the properties of the spring and tip used to probe the sample's surface. In this article, we describe a simple, nondestructive procedure for measuring the force constant, resonant frequency, and quality...

  • Low-cost modification of a contact atomic force microscope (AFM) into a sound-activated tapping... Vinckier, Anja; Hennau, Frans; Kjoller, Kevin; Hellemans, Louis // Review of Scientific Instruments;Feb1996, Vol. 67 Issue 2, p387 

    Presents a low-cost implementation of tapping mode atomic force microscope (AFM) on a commercial instrument. Tapping mode AFM in air; Tapping mode AFM in liquid.

  • Scanned-cantilever atomic force microscope. Baselt, David R.; Baldeschwieler, John D. // Review of Scientific Instruments;Apr93, Vol. 64 Issue 4, p908 

    We have developed a 3.6 μm scan range atomic force microscope that scans the cantilever instead of the sample, while the optical-lever detection apparatus remains stationary. The design permits simpler, more adaptable sample mounting, and generally improves ease of use. Software workarounds...

  • Calibration of optical lever sensitivity for atomic force microscopy. D'Costa, Neill P.; Hoh, Jan H. // Review of Scientific Instruments;Oct95, Vol. 66 Issue 10, p5096 

    Investigates the calibration of optical lever sensitivity for atomic force microscopy. Limiting factor in making measurements; Effects of a fixed displacement of the photodiode detector; Method for optical lever sensitivity calibration; Differences in the shape of the laser spot on the photodiode.

  • Cell biology smorgasbord.  // Nature;12/10/1998, Vol. 396 Issue 6711, p599 

    Presents information on several equipments used for research. Information offered by the BioSupplyNet online service of the SciQuest; Target research of the bioscope atomic-force microscope (AFM) from Digital Instruments; Features of the FlowTACS, an apoptosis detection kit from Genzyme Diagnostics.

  • Real-time, interferometrically measuring atomic force microscope for direct calibration of standards Gonda, S.; Doi, T.; Kurosawa, T.; Tanimura, Y.; Hisata, N.; Yamagishi, T.; Fujimoto, H.; Yukawa, H. // Review of Scientific Instruments;Aug1999, Vol. 70 Issue 8, p3362 

    Develops an atomic force microscope with a high-resolution three-axis laser interferometer for real-time correction of distorted topographic images. Calibration of standard samples for a scanning probe microscope on the basis of stabilized wavelength of He-Ne lasers; Components of the scanner;...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics