TITLE

Adequacy Assessment of a Distribution System Having Distributed Generation (DG) Under Extreme Probability Distributions

AUTHOR(S)
Arya, L. D.; Koshti, Atul; Ganguly, A. K.; Sheikh, Rizwan
PUB. DATE
July 2010
SOURCE
IUP Journal of Electrical & Electronics Engineering;Jul2010, Vol. 3 Issue 3, p42
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper describes a technique for evaluating reliability of a composite distribution system having Distribution Generator (DG) sets. The capacity of a composite distribution system includes capacity of a distribution substation and distribution generator sets. The capacity of a distribution substation has been assumed to be a continuous random variable whereas Markov modeling has been adopted for checking availability of DG sets. Extreme minimum and maximum distributions have been used for capacity and load on the distribution system. Therefore, it is worst case reliability evaluation of the composite distribution system. Probability of failure of the composite distribution supply system has been evaluated using Monte Carlo simulation. A case study has been considered for explaining the developed algorithm.
ACCESSION #
52917736

 

Related Articles

  • A seven-state Markov model for determining the optimal operating mode of distributed generators. Hosseini, S. A.; Vahidi, B.; Abyaneh, H. Askarian; Sadeghi, S. H. H.; Karami, M. // Journal of Renewable & Sustainable Energy;2015, Vol. 7 Issue 3, p1 

    Distributed generation resources (DG) can operate in three modes of peak shaving, backup, and intentional islanding. Optimal operation of DGs has high influence in reliability improvement and cost reduction. Accordingly, in this paper using the index of expected cost of interruption, the optimal...

  • Asymptotic distribution of the sample average value-at-risk. Stoyanov, Stoyan V.; Rachev, Svetlozar T. // Journal of Computational Analysis & Applications;Oct2008, Vol. 10 Issue 4, p465 

    In this paper, we prove a result for the asymptotic distribution of the sample average value-at-risk (AVaR) under certain regularity assumptions. The asymptotic distribution can be used to derive asymptotic confidence intervals when AVaRϵ(X) is calculated by the Monte Carlo method which is...

  • Reliability Analysis of Load-Sharing K-out-of-N System Considering Component Degradation. Yang, Chunbo; Zeng, Shengkui; Guo, Jianbin // Mathematical Problems in Engineering;6/8/2015, Vol. 2015, p1 

    The K-out-of-N configuration is a typical form of redundancy techniques to improve system reliability, where at least K-out-of-N components must work for successful operation of system. When the components are degraded, more components are needed to meet the system requirement, which means that...

  • Distributed Generation (DG) Capacity Planning Using Artificial Neural Network and Monte Carlo Simulation. Arya, L. D.; Koshti, Atul // ICFAI University Journal of Electrical & Electronics Engineering;2009, Vol. 2 Issue 2, p17 

    This paper presents a technique for evaluating the capacity of Distributed Generation (DG) required for adequate performance of a distribution system. Based on Monte Carlo Simulation (MCS), a methodology has been developed to evaluate the probability of failure and Expected Energy Not Supplied...

  • A Monte Carlo Estimation of the Entropy for Markov Chains. Chauveau, Didier; Vandekerkhove, Pierre // Methodology & Computing in Applied Probability;Mar2007, Vol. 9 Issue 1, p133 

    We introduce an estimate of the entropy $\mathbb{E}_{p^t}(\log p^t)$ of the marginal density p t of a (eventually inhomogeneous) Markov chain at time t=1. This estimate is based on a double Monte Carlo integration over simulated i.i.d. copies of the Markov chain, whose transition density...

  • Multivariate Phase-type Distributions. Assaf, David; Langberg, Naftali A.; Savits, Thomas H.; Moshe Shaked // Operations Research;May/Jun84, Vol. 32 Issue 3, p688 

    A () random variable is said to be of phase type if it can be represented as the time until absorption in a finite state absorbing Markov chain. Univariate phase type random variables are useful because they arise from processes that are often encountered in applications, they have densities...

  • Determination of customer perceived reliability indices for active distribution systems including omission of tolerable interruption durations employing bootstrapping. Arya, Rajesh // IET Generation, Transmission & Distribution;2016, Vol. 10 Issue 15, p3795 

    This study presents a novel methodology for evaluating customer and energy based reliability indices for distribution systems in the presence of distributed generations, considering the effect of omission of random tolerable interruption durations at load points. Bootstrapping technique along...

  • Evaluation of cost and reliability of power systems with large numbers of distributed generators. Sasaki, Yutaka; Kita, Hiroyuki; Tanaka, Eiichi; Hasegawa, Jun // Electrical Engineering in Japan;Apr2009, Vol. 167 Issue 2, p28 

    The authors have proposed the Flexible, Reliable and Intelligent ENergy Delivery System (called “FRIENDS”), which is a new concept for future power distribution systems. Also, a “micro grid” which is a similar concept to FRIENDS has been developed. In a micro grid, an...

  • Optimal operation of distribution networks with presence of distributed generations and battery energy storage systems considering uncertainties and risk analysis. Afshan, Razieh; Salehi, Javad // Journal of Renewable & Sustainable Energy;2017, Vol. 9 Issue 1, p014102-1 

    This paper presents a probabilistic framework for the operation of distribution networks considering distributed generations (DGs) and battery energy storage systems. This framework considers the uncertainty of electricity prices and output power of DGs. To account for uncertainties, the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics