TITLE

Enhancement of thermoelectric efficiency in (Ca,Dy)MnO3–(Ca,Yb)MnO3 solid solutions

AUTHOR(S)
Yang Wang; Yu Sui; Xianjie Wang; Wenhui Su
PUB. DATE
August 2010
SOURCE
Applied Physics Letters;8/2/2010, Vol. 97 Issue 5, p052109
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Transport and thermoelectric (TE) properties have been investigated for the (Ca,Dy)MnO3–(Ca,Yb)MnO3 solid solutions. Resistivity is found to be closely correlated with the structural distortions in this system. The enhanced TE efficiency in the solid solutions can be well attributed to the distortion of electronic density of states along with a strong point defect scattering. Such band structure engineering and phonon engineering have resulted in an effective improvement of the TE performance in these solid solutions and could be applied to more systems.
ACCESSION #
52802612

 

Related Articles

  • An Analysis of the Thermoelectric Efficiency of n-(Bi,Sb)[sub 2](Te,Se,S)[sub 3] Solid Solutions within an Isotropic Scattering Model. Kutasov, V. A.; Luk’yanova, L. N.; Konstantinov, P. P. // Physics of the Solid State;Nov2000, Vol. 42 Issue 11, p2039 

    A study is reported on the thermoelectric properties of n-type solid solutions Bi[sub 2]Te[sub 3 – ][sub y]Se[sub y](y=0.12,0.3,0.36), Bi[sub 2 –][sub x]Sb[sub x]Te[sub 3 – ][sub y]Se[sub y](x=0.08,0.12;y=0.24,0.36), and Bi[sub 2]Te[sub 3 – ][sub z]S[sub...

  • Alloy Design Strategies and Future Trends in High-Entropy Alloys. Yeh, Jien-Wei // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Dec2013, Vol. 65 Issue 12, p1759 

    High-entropy alloys (HEAs) are newly emerging advanced materials. In contrast to conventional alloys, HEAs contain multiple principal elements, often five or more in equimolar or near-equimolar ratios. The basic principle behind HEAs is that solid-solution phases are relatively stabilized by...

  • Transport Coefficients of n-Bi2Te2.7Se0.3 in a Two-Band Model of the Electron Spectrum. Konstantinov, P. P.; Prokof'eva, L. V.; Fedorov, M. I.; Pshenaı-Severin, D. A.; Ravich, Yu. I.; Kompaniets, V. V.; Chistyakov, V. A. // Semiconductors;Sep2005, Vol. 39 Issue 9, p1023 

    The Hall factor and thermoelectric properties of an n-Bi2Te2.7Se0.3 solid solution with the room-temperature Seebeck coefficient |S| = 212 μV/K have been studied in the temperature range 77–350 K. The observed temperature dependences demonstrate a number of specific features, which...

  • Effect of boundary scattering on the thermal conductivity of a nanostructured semiconductor material based on the BiSbTe solid solution. Bulat, L. P.; Drabkin, I. A.; Karataev, V. V.; Osvenskiĭ, V. B.; Pshenaĭ-Severin, D. A. // Physics of the Solid State;Sep2010, Vol. 52 Issue 9, p1836 

    This paper reports on a theoretical and experimental investigation of the behavior of the electrical and thermal conductivities of a nanostructured material based on BiSbTe solid solutions. The effect of boundary scattering has been taken into account by introducing the scattering mechanism with...

  • Thermoelectric properties of p-BiSbTe solid solutions under pressure. Ovsyannikov, S.; Grigor'eva, Yu.; Vorontsov, G.; Luk'yanova, L.; Kutasov, V.; Shchennikov, V. // Physics of the Solid State;Feb2012, Vol. 54 Issue 2, p261 

    This paper reports on a study of the Seebeck coefficient and power factor κ of p-BiSbTe solid solutions with different contents of antimony atoms in the bismuth sublattice for x = 0, 1.4, 1.5, and 1.6 under variation of pressure of up to 15 GPa. The magnitude of κ has been found to grow...

  • Highly anisotropic crystal growth and thermoelectric properties of K[sub 2]Bi[sub 8-x]Sb[sub x]Se[sub 13] solid solutions: Band gap anomaly at low x. Kyratsi, Theodora; Dyck, Jeffrey S.; Chen, Wei; Chung, Duck-Young; Uher, Ctirad; Paraskevopoulos, Konstantinos M.; Kanatzidis, Mercouri G. // Journal of Applied Physics;7/15/2002, Vol. 92 Issue 2, p965 

    The thermoelectric properties of solid solutions of the type β-K[sub 2]Bi[sub 8-x]Sb[sub x]Se[sub 13] (0

  • Model to determine recrystallization temperature of tungsten based dilute solid solution alloys. Zhang, Taiquan; Wang, Yujin; Zhou, Yu; Lei, Tingquan; Song, Guiming // Journal of Materials Science;Nov2006, Vol. 41 Issue 22, p7506 

    A new model is developed and used to predict the effect of the deformation history and the chemical purity on the recrystallization temperature of tungsten based dilute solid solution alloys.

  • Nonoxide High-melting Point Compounds as Materials for Extreme Conditions. ORDANYAN, S. S.; VIKHMAN, S. V.; NESMELOV, D. D.; DANILOVICH, D. P.; PANTELEEV, I. B. // Advances in Science & Technology;2014, Vol. 89, p47 

    Authors have studied the interaction between high-melting compounds from various classes, such as transition-metal carbides, borides, nitrides, and silicides, and covalent-bonded B4C, SiC, Si3N4, AlN etc. (over 160 phase diagrams), ternary B4C-SiC-MedB2, SiC-TiC-TiB2 and other eutectics, which...

  • Study of the Thermal Stability and Mechanical Characteristics of MAX Phases of Ti-Al-C(N) System and Their Solid Solutions. Tatiana, PRIKHNA; Thierry, CABIOC'H; Wolfgang, GAWALEK; Orest, OSTASH; Doris, LITZKENDORF; Sergey, DUB; Matvey, LOSHAK; Vladimir, SVERDUN; Chartier, Patrick; Tatiana, BASYUK; Victor, MOSHCHIL; Artem, KOZYREV; Myroslav, KARPETS; Valeriy, KOVYLAEV; Alexandra, STAROSTINA; Dmitriy, TURKRVICH // Advances in Science & Technology;2014, Vol. 89, p123 

    The DTA and TG study in air of Ti2Al(C1-xNx) and Ti3AlC2 synthesized under Ar 0.1 MPa pressure and densified in thermobaric conditions at 2 GPa, 1400 °C, for 1 h showed that the increase of the amount of TiC layers in Ti-Al-C MAX phases structures leads to the increase of their stability...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics