TITLE

Interfacial dipole dynamics of light-emitting diodes incorporating a poly(amidoamine) dendrimer monolayer

AUTHOR(S)
Winroth, Gustaf; Fenwick, Oliver; Scott, Mark A.; Yip, Daniel; Howorka, Stefan; Cacialli, Franco
PUB. DATE
July 2010
SOURCE
Applied Physics Letters;7/26/2010, Vol. 97 Issue 4, p043304
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We investigate the effects induced by a nonconjugated self-assembled monolayer of poly(amidoamine) (PAMAM) on the work function of thermally evaporated Al-electrodes. We compare results from Kelvin probe measurement of the electrodes work function with electroabsorption characterization of the built-in voltage of polymer light-emitting diodes incorporating them. Interestingly, we find that the PAMAM monolayer decreases the work function by 0.4 eV in a Kelvin probe measurement but that the dipole induced by the PAMAM monolayer is altered by biasing, and that it exhibits a hysteretic behavior in a cyclic voltage scan.
ACCESSION #
52616396

 

Related Articles

  • Electroluminescence from multilayer organic light-emitting diodes using poly(methylphenylsilane) as hole transporting material. Suzuki, Hiroyuki; Meyer, Harald; Hoshino, Satoshi; Haarer, Dietrich // Journal of Applied Physics;8/15/1995, Vol. 78 Issue 4, p2684 

    Features a study that investigated the optical and electrical properties of polysilane-based multilayer electroluminescent devices, utilizing polymethylphenysilane (PMPS) as the hole transporting material, in order to elucidate the mechanism of electroluminescence in the devices. Background on...

  • Precise Temperature Mapping of GaN-Based LEDs by Quantitative Infrared Micro-Thermography. Ki Soo Chang; Sun Choel Yang; Kim, Jae-Young; Myung Ho Kook; Seon Young Ryu; Hae Young Choi; Geon Hee Kim // Sensors (14248220);2012, Vol. 12 Issue 4, p4648 

    A method of measuring the precise temperature distribution of GaN-based light-emitting diodes (LEDs) by quantitative infrared micro-thermography is reported. To reduce the calibration error, the same measuring conditions were used for both calibration and thermal imaging; calibration was...

  • Photobiological Safety Analyzing of Large-Size LED Color Screen for Human Eyes. Jinyuan Liu; Hang Lv; Shuwen Dong; Kai Lin; Lifang Wan; Yasheng Li // Optoelectronics (21645450);Sep2014, Vol. 4 Issue 3, p27 

    Large-size LED lattice color screen is widely used due to the advantages of high brightness, wide color gamut, high contrast etc.; meanwhile the photobiological safety issue of LED screen is con-cerned. According to current CIE standard, this paper sets up an objective model for evaluating the...

  • Semiconductor laser monolithically pumped with a light emitting diode operating in the thermoelectrophotonic regime. Liu, X.; Zhao, G.; Zhang, Y.; Deppe, D. G. // Applied Physics Letters;2/25/2013, Vol. 102 Issue 8, p081116 

    Data are presented on a monolithic chip that integrates a quantum well semiconductor laser with a high efficiency light emitting diode (LED), with the LED used to optically pump the laser. The LED operates in the thermoelectrophotonic regime that can produce heat absorption, offering the...

  • Research on Optimization of Cooling Structure of LED Element (The 2nd Report). T. Kobayashi; Y. Sakate; R. Hashimoto; T. Takashina; H. Kanematsu; Y. Utsumi // AIP Conference Proceedings;2014, Vol. 1585, p128 

    This report shows a design guideline on the parts dimension of LED light bulb for heat transfer. LED light bulb is popular owing to the high efficiency and long life. However, LED element is a point heat source. Therefore, LED light bulb has some problems about heat transfer when it is used for...

  • Efficient multilayer white polymer light-emitting diodes with aluminum cathodes. Niu, Xiaodi; Qin, Chuanjiang; Zhang, Baohua; Yang, Junwei; Xie, Zhiyuan; Cheng, Yanxiang; Wang, Lixiang // Applied Physics Letters;5/14/2007, Vol. 90 Issue 20, p203513 

    Efficient multilayer white polymer light-emitting diodes (WPLEDs) with aluminum cathodes are fabricated. The multilayer structure is composed of a water soluble hole-injection layer, a toluene-soluble emissive layer, and an alcohol-soluble emissive layer. The polarity difference of the solvents...

  • Langmuir and Langmuir-Blodgett Films of Polyfluorenes and Their Use in Polymer Light-Emitting Diodes. Ferreira, Marystela; Olivati, Clarissa A.; Machado, Angelita M.; Assaka, Andressa M.; Giacometti, José A.; Akcelrud, Leni; Oliveira Jr., Osvaldo N. // Journal of Polymer Research;Feb2007, Vol. 14 Issue 1, p39 

    The Langmuir and Langmuir-Blodgett (LB) film properties of two polyfluorene derivatives, namely poly(2,7-9,9′-dihexylfluorene-dyil) (PDHF) and poly(9,9 dihexylfluorene-dyil-vynilene-alt-1,4-phenylene-vyninele) (PDHF-PV), are reported. Surface pressure (П-A) and surface potential...

  • Comment on “A quantitative numerical model of multilayer vapor-deposited organic light emitting diodes” [J. Appl. Phys. 86, 3895 (1999)]. Song, Su-Bin; Lee, Joo Hwa; Oh, Jun-Sik // Journal of Applied Physics;6/1/2003, Vol. 93 Issue 11, p9404 

    In an article of numerical modeling and simulation of organic light emitting diodes [J. Appl Phys. 86, 3895 (1999)], Staudigel et al. solved a one-dimensional Poisson equation to get an electric field at each monolayer, which is incorrect. The corrected solution of the Poisson equation can give...

  • Tailoring of self-assembled monolayer for polymer light-emitting diodes. Choi, Beomrak; Rhee, Jungsoo; Lee, Hong H. // Applied Physics Letters;9/24/2001, Vol. 79 Issue 13 

    The choice of a self-assembled monolayer (SAM) is tailored to specifically remove water on an indium-tin oxide electrode and to reduce barrier height for long-term stability of polymer light-emitting diodes. Water, which is a major cause of long-term degradation, is shown to have entirely...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics