TITLE

INTERPRETATION OF OPEN CIRCUIT POTENTIAL OF TWO TITANIUM ALLOYS FOR A LONG TIME IMMERSION IN PHYSIOLOGICAL FLUID

AUTHOR(S)
Jiménez, Y. Santana; Gil, M. Tejera; Guerra, M. Torrado; Baltes, L. S.; Rosca, J. C. Mirza
PUB. DATE
January 2009
SOURCE
Bulletin of the Transilvania University of Brasov, Series I: Eng;2009, Vol. 2 Issue 51, p197
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Increased use of titanium alloys as biomaterials is occurring due to their superior biocompatibility and high corrosion resistance in the human body. Ti-6Al-7Nb was investigated compared with Ti-6Al-4V and two surface treatments were applied for increasing the bioactivity of the alloy. The results were interpreted from electrochemical and statistical point of view. It can be concluded that the alloy Ti-6Al-7Nb is a real alternative to the well-known Ti-6Al-4V alloy, which has been used for decades as an implant material and the obtained results are important for the safe long-term in vivo application of the Ti-6Al-7Nb alloy since niobium has the characteristics of an immunologically inert metal.
ACCESSION #
52551815

 

Related Articles

  • CORROSION BEHAVIOUR IN RINGER SOLUTION OF BIOCOMPATIBLE MATERIALS, 315L AND Ti6Al4V. OANCEA, Lisette; VETELEANU, Ana; NASCOV, Victor; CHICHERNEA, Florin; URSUTIU, Doru; SAMOILA, Cornel // Metalurgia International;2013 Special Issue Nr. 5, Vol. 18, preceding p5 

    The purpose of this study is to test the corrosion behavior of stainless steel in simulated biological environment in comparison with the titan base alloy. Thus establishing the usage limits of stainless steel hl medical field while the extensive use of titan based alloys is excellent due to its...

  • Characterization of Ti-27Nb-13Zr Alloy Produced by Powder Metallurgy. Mendes, M. W. D.; Bressiani, A. H. A.; Bressiani, J. C. // Advances in Science & Technology;2013, Vol. 77, p178 

    Titanium alloy are widely used in biomedical applications due to their excellent properties such as high strength, good corrosion resistance and excellent biocompatibility. Researches are being developed with elements such as Nb and Zr that reach all criterions for excellent biocompatibility and...

  • Mechanical Alloying of Ti-20Ta-20Nb-(10/20)Mg Alloys. ADAMEK, G. // Acta Physica Polonica, A.;2014, Vol. 126 Issue 4, p871 

    In this paper preparation of new β-Ti alloys using mechanical alloying process has been shown. β-Ti alloys are the best metallic biomaterials because of their excellent properties: biocompatibility, low Young moduli and corrosion resistance. Ti-20Ta-20Nb biocompatible alloy was...

  • THE STUDY ON GRANTING BIOACTIVITY OF Ti ALLOY BY SURFACE TREATMENT. HA, N. R.; YANG, Z. X.; KIM, G. C.; HWANG, K. H.; SEO, D. S.; LEE, J. K. // Surface Review & Letters;Apr2010, Vol. 17 Issue 2, p153 

    Titanium alloys are superior of biocompatibility, mechanical properties and chemical stability. The biocompatibility of Ti alloy is related to the surface effect between human tissue and implant. Therefore, the purpose of this study is to investigate the bioactivity of Ti alloy by alkali and...

  • Alleviating fatigue and failure of NiTi endodontic files by a coating containing inorganic fullerene-like WS2 nanoparticles. Adini, Adi Ram; Feldman, Yishay; Cohen, Sidney R.; Rapoport, Lev; Moshkovich, Alexey; Redlich, Meir; Moshonov, Joshua; Shay, Boaz; Tenne, Reshef // Journal of Materials Research;5/28/2011, Vol. 26 Issue 10, p1234 

    Nickel-titanium (NiTi) alloys combine several remarkable characteristics, among them are shape-memory, superelasticity, great strain recovery, good biocompatibility, and corrosion resistance. These render them well suited to a wide range of medical applications, such as cardiovascular stents,...

  • Tensile Property of Electrochemically Polished Titanium Alloy. Takashi IKUSHIMA; Tetsuhide SHIMIZU; Ming YANG // Advanced Materials Research;2014, Issue 939, p146 

    Tensile tests of titanium alloy (Ti-6Al-4V) with different thickness of 0.4 mm and 0.3 mm, were performed to investigate thickness dependency of superplasticity. To keep the same inner microstructure between specimens with different thicknesses, electrochemical polishing method was applied to...

  • Enhancing the blood compatibility of ion-selective electrodes. Gavalas, Vasilis G.; Berrocal, Maria J.; Bachas, Leonidas G. // Analytical & Bioanalytical Chemistry;Dec2005, Vol. 384 Issue 1, p65 

    In vivo monitoring of various analytes is important for many bioanalytical and biomedical applications. The crucial challenge in this type of applications is the interaction of the sensor with the host environment, which is qualitatively described by the term biocompatibility. This review...

  • Internal Friction and Microstructure of Ti and Ti-Mo Alloys Containing Oxygen. Martins, J.R.S.; Araújo, R.O.; Nogueira, R.A.; Grandini, C.R. // Archives of Metallurgy & Materials;Mar2016, Vol. 61 Issue 1, p25 

    Ti-Mo alloys are promising materials for use as biomaterials, because these alloys have excellent corrosion resistance and a good combination of mechanical properties such as fatigue, low elastic modulus, hardness, and wear resistance. The objective of this paper was to study the effect of heavy...

  • LASER GAS NITRIDING OF TITANIUM AND TITANIUM ALLOYS. DAI, J. J.; HOU, S. Q. // Surface Review & Letters;Dec2009, Vol. 16 Issue 6, p789 

    Titanium and titanium alloys are widely used in many fields due to some of their characteristics such as light density, high strength, and excellent corrosion resistance. However, poor mechanical performances limit their practical applications. Laser gas nitriding is a promising method used to...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics