TITLE

Organic electrochemical light emitting field effect transistors

AUTHOR(S)
Yumusak, C.; Sariciftci, N. S.
PUB. DATE
July 2010
SOURCE
Applied Physics Letters;7/19/2010, Vol. 97 Issue 3, p033302
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We report on the demonstration of an organic electrochemical light emitting field effect transistor. The device fabricated in bottom gate/bottom contact geometry using a conjugated polymer poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) mixed with polymer electrolyte poly(ethylene oxide) including lithium trifluoromethanesulfonate (Li triflate) as active layer and poly(vinyl alcohol) as gate dielectric. Orange-yellow light emission is observed from the device. The output characteristics (source-drain current versus the source-drain voltage) and transfer characteristics (source-drain current versus the gate voltage) of the device are reported.
ACCESSION #
52479437

 

Related Articles

  • Efficient single-component light-emitting electrochemical cells with an ion-conducting water-soluble polyfluorene. Doojin Vak; Seung-Hwan Oh; Dong-Yu Kim // Applied Physics Letters;6/15/2009, Vol. 94 Issue 24, p243305 

    Polymer light-emitting diodes (PLEDs) and light-emitting electrochemical cells (LECs) were fabricated using a water-soluble conjugated polymer with ion-conducting side chains. The water-soluble polymer was spin-coated on the emitting layer of a PLED and was used as an electron-injecting layer....

  • The Five Building Blocks Of An Efficient, High-Brightness LED Driver. Reddy, Rakesh // Electronic Design;9/24/2009, Vol. 57 Issue 19, p48 

    The article discusses various scenarios required to produce an efficient high-brightness light-emitting diode (HBLED) driver. According to the author, to meet the demands for HBLED applications, it requires a system that has right specifications, such as voltage of load, efficiency, and size of...

  • Controlling bulk aggregation state in semiconducting conjugated polymer solution. Chi-Chung Hua; Chih-Yuan Kuo; Show-An Chen // Applied Physics Letters;9/22/2008, Vol. 93 Issue 12, p123303 

    Dynamic light scattering measurements disclosed the ubiquity of large aggregate species (i.e., generally above 100 nm in hydrodynamic radius) in the precursor solutions customarily used to fabricate polymer-based light-emitting diodes (PLEDs). Transformation of these species into nanoscale thin...

  • Enhancement of organic magnetoresistance by electrical conditioning. Niedermeier, U.; Vieth, M.; Pätzold, R.; Sarfert, W.; von Seggern, H. // Applied Physics Letters;5/12/2008, Vol. 92 Issue 19, p192902 

    We demonstrate that electrical conditioning can be used as an efficient method to enhance the organic magnetoresistance effect in organic light emitting diodes. Depending on duration and intensity of the conditioning process the absolute value of the magnetoresistance effect can be increased...

  • Spin-cast thin semiconducting polymer interlayer for improving device efficiency of polymer light-emitting diodes. Ji-Seon Kim; Friend, Richard H.; Grizzi, Ilaria; Burroughes, Jeremy H. // Applied Physics Letters;7/11/2005, Vol. 87 Issue 2, p023506 

    We report that adding a thin (∼10 nm) semiconducting polymer interlayer between apoly(styrenesulphonate)-doped poly(3,4-ethylenedioxythiophene) (PEDT:PSS) hole transporter and an emissive semiconductor significantly improves the device efficiency of polymer light-emitting diodes (LEDs)....

  • Electrophosphorescence from triplet excimers in poly-(N-vinylcarbazole). Qian, Lei; Bera, Debasis; Holloway, Paul H. // Applied Physics Letters;3/5/2007, Vol. 90 Issue 10, p103511 

    The authors have observed electrophosphorescence from triplet excimer in poly-(N-vinylcarbazole) (PVK) polymer at room temperature. The triplet excimer appears to be influenced by the PVK molecular conformation. This observation is very important to the understanding of the mechanism of triplet...

  • Synthesis and light-emitting properties of poly[9-(4′-tert-butyl-phenylenemethene)-fluoroene-co-9,9-dioctylfluorene]. Yu, Zongqiang; Tan, Songting; Yuan, Zhuling; Zou, Yingping; Fan, Benhu; Li, Yongfang // Journal of Materials Science;Feb2007, Vol. 42 Issue 4, p1325 

    A novel copolymer, poly[9-(4′-tert-butyl-phenylenemethene)-fluoroene-co-9,9-dioctylfluorene], has been synthesized through the Yamamoto coupling method. The copolymer has good solubility and thermal stability with a glass transition temperature at 85 °C. The PL spectrum of the copolymer...

  • Spectral conversion of InGaN ultraviolet microarray light-emitting diodes using fluorene-based red-, green-, blue-, and white-light-emitting polymer overlayer films. Heliotis, G.; Stavrinou, P. N.; Bradley, D. D. C.; Gu, E.; Griffin, C.; Jeon, C. W.; Dawson, M. D. // Applied Physics Letters;9/5/2005, Vol. 87 Issue 10, p103505 

    We report the fabrication of hybrid organic/inorganic semiconductor light-emitting devices that operate across the entire visible spectrum. The devices are based on a series of blue-, green-, and red-light-emitting polyfluorene materials that convert the emission from an array of micron-sized...

  • Organic Electronics. Gharpure, Y. H. // Chemical Business;Jan2014, Vol. 28 Issue 1, p29 

    The article offers information on organic (polymer) electronics. Organic electronics is said to be a branch of material science dealing with electrically conductive polymers and conductive small molecules. Polyacetylene, polyaniline and polythiophene are also included in the group. Organic...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics