TITLE

Whanghae Precision/South Korea

PUB. DATE
June 2010
SOURCE
Wire Journal International;Jun2010, Vol. 43 Issue 6, p64
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article features Whanghae Precision, a South Korean-based company which offers various spray coating technologies including thermal, powder flame, and plasma spray coatings.
ACCESSION #
51498272

 

Related Articles

  • Determination of Oxygen Content in Perovskite-Type Cathode Coatings. Cheng-Xin Li; Min Gao // Key Engineering Materials;2014, Vol. 591, p3 

    La0.75Sr0.25MnO3-δ (LSM) and La0.6Sr0.4CoO3-δ (LSCO) coatings were prepared by the atmospheric plasma spraying method and flame spraying method. Both coatings were annealed at 800°, 900°, 1000°C for 5, 10, 15 and 20h. Oxygen content of LSM and LSCO coatings were determined by...

  • Thermal Spray at Boeing: Past, Present, and Future. Ghabchi, Arash // Advanced Materials & Processes;Feb2013, Vol. 171 Issue 2, p39 

    The article discusses the development of thermal spray technology at The Boeing Co. since the release of its first thermal specification, "Plasma Flame Spray Coating" in 1968. It notes the challenges for coating design to meet new requirements in structural material and design of next-generation...

  • Influence of CrC addition in Ni-Cr-Si-B flame sprayed coatings on microstructure, microhardness and wear behaviour. Harsha, S.; Dwivedi, D.; Agarwal, A. // International Journal of Advanced Manufacturing Technology;Aug2008, Vol. 38 Issue 1/2, p93 

    In the present paper the influence of the addition of chromium carbide (CrC) particles on the microstructure, microhardness and abrasive wear behaviour of flame sprayed Ni-Cr-Si-B coatings deposited on low carbon steel substrate has been reported. Wear behaviour of the coatings was evaluated...

  • The Effect of CeO Addition on the Microstructure and Properties of Ni-Based Flame-Spray Coatings. Zhang, Zhenyu; Liang, Bunv; Guo, Hongjian // Journal of Thermal Spray Technology;Apr2014, Vol. 23 Issue 4, p725 

    Ni-based alloy with different amount of CeO powders were flame sprayed and melted onto 1045 carbon steel substrate. Microstructure and properties of the coatings were studied by XRD, field emission gun scanning electron microscope (FEGSEM) and SEM analyses. The wear behavior of the coatings was...

  • INFLUENCIA DE LOS PARÁMETROS DE PROYECCIÓN TÉRMICA EN LA MICROESTRUCTURA DE LOS RECUBRIMIENTOS DE CIRCONA-ALÚMINA Y CIRCONACERIA USADOS COMO BARRERAS TÉRMICAS. González, Andrés; Henao, John; Díaz, Andrés Felipe; López, Esperanza; Vargas, Fabio // La Revista Latinoamericana de Metalurgia y Materiales, RLMM;2013, Vol. 33 Issue 2, p272 

    The influence of the spraying parameters on the microstructure of ZrO2 -- 36 wt.% Al2O3 y ZrO2 -- 17wt.% CeO2 coatings was evaluated. The coatings were produced by oxyacetylene flame spraying on substrates of AISI 1020 carbon steel, which had a previous deposited bond coat of 90 wt.% Ni -- 5...

  • The effect of Al2O3-SiO2 mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application. Widyastuti; Kukuh, W. W.; Putrawan, M. A.; Alvian, T. W.; Ridwan, S. // AIP Conference Proceedings;Sep2013, Vol. 1555 Issue 1, p75 

    Nozzle is one part of rocket which works at high temperatures. The S45C steel is applied for material base of nozzle. This material was coated by Thermal barrier coating (TBC) of Al2O3-SiO2. The mixing ratio of ceramic oxide were 80% Al2O3 - 20% SiO2; 70% Al2O3 - 30% SiO2, and 60% Al2O3 - 40%...

  • Application of Flame-Sprayed Coatings as Heating Elements for Polymer-Based Composite Structures. Lopera-Valle, Adrián; McDonald, André // Journal of Thermal Spray Technology;Oct2015, Vol. 24 Issue 7, p1289 

    Flame-sprayed nickel-chromium-aluminum-yttrium (NiCrAlY) and nickel-chromium (NiCr) coatings were deposited on fiber-reinforced polymer composites for use as heating elements of structures that were exposed to cold environments. Electrical current was applied to the coatings to increase the...

  • What Do We Know, What are the Current Limitations of Suspension HVOF Spraying? Killinger, A.; Müller, P.; Gadow, R. // Journal of Thermal Spray Technology;Oct2015, Vol. 24 Issue 7, p1130 

    Suspension spraying has evolved during the past decades and now is at the threshold of a commercial utilization. Compared to standard powder spray methods, mainly DC plasma spraying and (high velocity) flame spraying, it is quite clear that suspension spraying will not replace these...

  • A Study on Wear Behaviour of NiCrBSi Flame Sprayed Coatings. PAULIN, Constantin; CHICET, Daniela; ISTRATE, Bogdan; AVRAM, Petru; MUNTEANU, Corneliu // Advanced Materials Research;2015, Vol. 1128, p332 

    The present study is an attempt to observe and evaluate the dry rolling wear behavior [1] of three types of Ni-base coatings on an Amsler type wear machine, against low-alloyed steel discs. The tested coatings were obtained by flame spraying (on the same low-alloyed steel substrate as the discs)...

Share

Read the Article

Courtesy of NEW JERSEY STATE LIBRARY

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics