TITLE

An amplified femtosecond laser system for material micro-/nanostructuring with an integrated Raman microscope

AUTHOR(S)
Zalloum, Othman H. Y.; Parrish, Matthew; Terekhov, Alexander; Hofmeister, William
PUB. DATE
May 2010
SOURCE
Review of Scientific Instruments;May2010, Vol. 81 Issue 5, p053906
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In order to obtain new insights into laser-induced chemical material modifications, we introduce a novel combined approach of femtosecond pulsed laser-direct writing and in situ Raman microscopy within a single experimental apparatus. A newly developed scanning microscope, the first of its kind, provides a powerful tool for micro-/nanomachining and characterization of material properties and allows us to relate materials’ functionality with composition. We address the issues of light delivery to the photomodification site and show the versatility of the system using tight focusing. Amplified femtosecond pulses are generated by a Ti:sapphire laser oscillator and a chirped-pulse regenerative amplifier, both pumped by a diode-pumped frequency doubled neodymium-doped yttrium orthovanadate (Nd:YVO4) laser operating at 532 nm. Results of Raman spectroscopy and scanning electron microscopy images of femtosecond laser micro-/nanomachining on the surface and in the bulk of single-crystal diamond obtained from first trials of this instrument are also presented. This effective combination could help to shed light on the influence of the local structure fluctuations on controllability of the laser processing and the role of the irradiation in the ablation processes ruling out possible imprecisions coming from the use of the two independent techniques.
ACCESSION #
51059047

 

Related Articles

  • Formation of Laser-induced Periodic Surface Structures During Femtosecond Laser Ablation of Highly Oriented Pyrolytic Graphite (HOPG). W. ZHANG; M. ZHOU; G. AMOAKO; Y-L. SHAO; B-J. LI; J. LI; C-Y. GAO // Lasers in Engineering (Old City Publishing);2013, Vol. 25 Issue 5/6, p397 

    Formation of laser-induced periodic surface structures (LIPSS) during femtosecond laser ablation of highly oriented pyrolytic graphite (HOPG) is investigated. Using a 1kHz femtosecond pulses (pulse width 130 fs, centre wavelength 800 nm) for micro-processing on HOPG, the calculated ablation...

  • Nanoscale patterning of graphene through femtosecond laser ablation. Sahin, R.; Simsek, E.; Akturk, S. // Applied Physics Letters;2/3/2014, Vol. 104 Issue 5, p053118-1 

    We report on nanometer-scale patterning of single layer graphene on SiO2/Si substrate through femtosecond laser ablation. The pulse fluence is adjusted around the single-pulse ablation threshold of graphene. It is shown that, even though both SiO2 and Si have more absorption in the linear regime...

  • Micromachining and surface processing of the super-hard nano-polycrystalline diamond by three types of pulsed lasers. Okuchi, Takuo; Ohfuji, Hiroaki; Odake, Shoko; Kagi, Hiroyuki; Nagatomo, Syohei; Sugata, Mitsuru; Sumiya, Hitoshi // Applied Physics A: Materials Science & Processing;Sep2009, Vol. 96 Issue 4, p833 

    Laser beam micromachining was applied to super-hard nano-polycrystalline diamond (NPD) synthesized by the direct conversion of graphite at high pressure and high temperature. Three types of pulsed lasers were tested: nanosecond near-infrared, nanosecond near-ultraviolet, and femtosecond...

  • In situ diagnostic of the size distribution of nanoparticles generated by ultrashort pulsed laser ablation in vacuum. Bourquard, Florent; Loir, Anne-Sophie; Donnet, Christophe; Garrelie, Florence // Applied Physics Letters;3/10/2014, Vol. 104 Issue 10, p1 

    We aim to characterize the size distribution of nanoparticles located in the ablation plume produced by femtosecond laser interaction. The proposed method relies on the use of white-light extinction spectroscopy setup assisted by ultrafast intensified temporal gating. This method allows...

  • Femtosecond Laser Drilling of Alumina Wafers. Chengde Li; Seongkuk Lee; Nikumb, Suwas // Journal of Electronic Materials;Sep2009, Vol. 38 Issue 9, p2006 

    The topography, radial spread, and chemical composition of the slag produced during percussion and trepanning hole drilling techniques using femtosecond laser were investigated. Results of analyses by optical microscopy, scanning electron microscopy, and energy dispersion spectroscopy are...

  • Influence of the hydration state on the ultrashort laser ablation of dental hard tissues. Rego Filho, Francisco de; Dutra-Corrêa, Maristela; Nicolodelli, Gustavo; Bagnato, Vanderlei; Araujo, Maria // Lasers in Medical Science;Jan2013, Vol. 28 Issue 1, p215 

    Since about 40 years, laser-based surgical tools have been used in medicine and dentistry to improve clinical protocols. In dentistry, femtosecond lasers have been claimed to be a potential ablation tool. It would, however, be good to perform a more fundamental investigation to understand...

  • Dynamics of Femtosecond Laser Ablation Plume Studied With Ultrafast X-ray Absorption Fine Structure Imaging. Oguri, Katsuya; Okano, Yasuaki; Nishikawa, Tadashi; Nakano, Hidetoshi // AIP Conference Proceedings;10/8/2010, Vol. 1278 Issue 1, p656 

    We investigated the dynamic process of an expanding femtosecond laser ablation plume of aluminum generated in an irradiation intensity range of 1013-1015 W/cm2 with the ultrafast x-ray absorption fine structure (XAFS) imaging technique. The XAFS spectra of the aluminum LII,III edge of the plume...

  • Synthesis of nanofiber-filled polydimethylsiloxane using ultrafast laser irradiation. Selvaraj, Hamsapriya; Tan, Bo; Venkatakrishnan, Krishnan // Journal of Polymer Research;Nov2011, Vol. 18 Issue 6, p1659 

    In this article, we report the filling of polydimethylsilioxane (PDMS) with nanofibers using femtosecond laser of MHz pulse frequency under ambient conditions. Nanoscale fibrous structure was created by femtosecond laser ablation of silicon. The generated silicon nanofiber was dispersed into...

  • Femtosecond laser ablation of brass in air and liquid media. Shaheen, M. E.; Gagnon, J. E.; Fryer, B. J. // Journal of Applied Physics;Jun2013, Vol. 113 Issue 21, p213106 

    Laser ablation of brass in air, water, and ethanol was investigated using a femtosecond laser system operating at a wavelength of 785 nm and a pulse width less than 130 fs. Scanning electron and optical microscopy were used to study the efficiency and quality of laser ablation in the three...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics