TITLE

Thermo-acoustic random response of temperature-dependent functionally graded material panels

AUTHOR(S)
Ibrahim, Hesham Hamed; Hong Hee Yoo; Tawfik, Mohammad; Kwan-Soo Lee
PUB. DATE
August 2010
SOURCE
Computational Mechanics;Aug2010, Vol. 46 Issue 3, p377
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A nonlinear finite element model is provided for the nonlinear random response of functionally graded material panels subject to combined thermal and random acoustic loads. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The governing equations are derived using the first-order shear-deformable plate theory with von Karman geometric nonlinearity and the principle of virtual work. The thermal load is assumed to be steady state constant temperature distribution, and the acoustic excitation is considered to be a stationary white-Gaussian random pressure with zero mean and uniform magnitude over the plate surface. The governing equations are transformed to modal coordinates to reduce the computational efforts. Newton�Raphson iteration method is employed to obtain the dynamic response at each time step of the Newmark implicit scheme for numerical integration. Finally, numerical results are provided to study the effects of volume fraction exponent, temperature rise, and the sound pressure level on the panel response.
ACCESSION #
50724671

 

Related Articles

  • Topology optimisation as a tool for obtaining a multimaterial structure. Kutyłowski, R.; Rasiak, B.; Szwechłowicz, M. // Archives of Civil & Mechanical Engineering (Oficyna Wydawnicza P;2011, Vol. 11 Issue 2, p391 

    Topology optimisation problem solutions are generally presented in such a way that ultimately a material/ void (1/0) distribution is obtained in the design domain. For this purpose, filtering techniques are usually used or post-processing is applied in the optimisation process. As a rule, the...

  • The use of numerical simulations to improve a new analytical chip formation model. SALVATORE, FERDINANDO; MABROUKI, TAREK; HAMDI, HÉDI // Mechanics & Industry;2012, Vol. 13 Issue 6, p405 

    In this paper, an analytical approach is proposed to model chip formation in the case of turning process. Numerical simulations of chip genesis are performed in order to fit efficiently the proposed analytical model. In particular, cutting edge radius influence, temperature and internal stresses...

  • Vibro-impact response of a cracked bar. Hiwarkar, Vikrant R.; Babitsky, Vladimir I.; Silberschmidt, Vadim V. // Shock & Vibration;2011, Vol. 18 Issue 1/2, p147 

    The presence of a crack in a structure affects its dynamic behaviour under working conditions. Cracks introduce nonlinearities into the system; the use of such nonlinearities for damage detection should be investigated. A model of a one-dimensional cracked cantilever bar subjected to...

  • Strain-gradient extension of hypoplasticity. Osinov, V. A.; Wu, W. // Acta Mechanica;Feb2009, Vol. 203 Issue 1/2, p37 

    The paper presents an extension of the hypoplasticity theory by introducing the second-order gradient of the strain rate into the constitutive equation. The strain-gradient extension is aimed at the adequate modelling of the shear band formation in the post-localization regime. It is proved...

  • Analysis of 2D flexible mechanisms using linear finite elements and incremental techniques. Kanarachos, Stratis // Computational Mechanics;Jul2008, Vol. 42 Issue 1, p107 

    In this paper, a fully linear method for the kinetoelastodynamic analysis of mechanisms of engineering praxis, characterized by large displacements and rotations (rigid body motion) but small elastic displacements and strains, based on the standard Euler�Bernoulli finite elements is...

  • Investigation of the geometry of strain paths in anisotropic targets under impact loading. Krivosheina, M. N.; Kozlova, M. A. // Strength of Materials;Mar2010, Vol. 42 Issue 2, p197 

    In this paper, the strain paths occurring in an anisotropic aluminum target under its impact loading are considered. The calculations are performed in a three-dimensional formulation using the finite-element method. The relationship between the �kinks� in the strain paths at different...

  • A procedure for evaluating high residual stresses using the blind hole drilling method, including the effect of plasticity. Beghini, M.; Bertini, L.; Santus, C. // Journal of Strain Analysis for Engineering Design (Professional ;May2010, Vol. 45 Issue 4, p301 

    When the blind hole drilling method is used to evaluate high residual stresses in a metallic component, plastic relaxed strain can be produced in the hole region because of the stress concentration that causes the local stresses to reach yielding. By assuming a linear-elastic behaviour of the...

  • FROM ENERGY IMPROVEMENT TO ACCURACY ENHANCEMENT: IMPROVEMENT OF PLATE BENDING ELEMENTS BY THE COMBINED HYBRID METHOD. Xiao-ping Xie // Journal of Computational Mathematics;Jul2004, Vol. 22 Issue 4, p581 

    By following the geometric point of view in mechanics, a novel expression of the combined hybrid method for plate bending problems is introduced to clarify its intrinsic mechanism of enhancing coarse-mesh accuracy of conforming or nonconforming plate elements. By adjusting the combination...

  • Reflow Phenomenon Analysis of Large Scale Integrated Cu Interconnections in Via Holes by Viscoelastic Deformation Simulation. Onishi, Takashi; Mizuno, Masao; Yoshikawa, Tetsuya; Munemasa, Jun; Inoue, Takao; Miyagaki, Aki; Nakamoto, Hisashi; Onoda, Takayuki // Journal of Electronic Materials;Mar2010, Vol. 39 Issue 3, p318 

    The reflow phenomenon of Cu interconnections deposited over via holes was analyzed by viscoelastic deformation simulation using a finite-element method to clarify the embedding mechanism of Cu interconnections into via holes in a novel dual-damascene fabrication technology, which combined...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics