TITLE

Thermal ratcheting of solder-bonded layered plates: cyclic recovery and growth of deflection

AUTHOR(S)
Nakane, Kazuhiko; Ohno, Nobutada; Tanie, Hisashi
PUB. DATE
July 2010
SOURCE
Computational Mechanics;Jul2010, Vol. 46 Issue 2, p259
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper describes computational analysis of the thermal ratcheting of solder-bonded layered plates subjected to cyclic thermal loading following solder-bonding. Finite element computations of Si/solder/Cu layered plates are performed by taking into account mechanical ratcheting of the copper as well as temperature-dependent creep of the solder. A sophisticated non-linear kinematic hardening model is used for appropriately representing mechanical ratcheting of the copper; a temperature-dependent power-law creep model is assumed for the solder. It is shown that the layered plates can exhibit either the cyclic recovery or the cyclic growth of deflection depending on the extent of plastic yielding in the copper layer, and that the cyclic recovery always occurs if the copper layer is elastic. It is also demonstrated that the cyclic recovery of deflection can be much greater than the static recovery of deflection at a constant temperature.
ACCESSION #
50498661

 

Related Articles

  • Prediction of Springback After Draw-Bending Test Using Different Material Models. Racz, Sever-Gabriel; Khan, Salim; Chalal, Hocine; Abed-Meraim, Farid; Balan, Tudor // AIP Conference Proceedings;1/17/2011, Vol. 1315 Issue 1, p419 

    Within the framework of sheet metal forming, the importance of hardening models for springback predictions has been often emphasized. While some specific applications require very accurate models, in many common situations simpler (isotropic hardening) models may be sufficient. In these...

  • HAN New Plate Bending Macro-Element. Hamid R. Abdulsalam Al-Ani // Journal of Applied Sciences;2007, Vol. 7 Issue 16, p2285 

    Macro-elements are one of the powerful means in reducing number of equations to be solved in finite element analysis. This is because a single macro-element will represent many finite elements. In this study a rectangular plate bending macro-element was developed. This macro-element is based on...

  • EVALUATION OF SURFACE HARDENING BY MEASURING MAGNETIC PROPERTIES. Tsuchida, Y.; Matsuda, T.; Enokizono, M. // AIP Conference Proceedings;6/23/2011, Vol. 1335 Issue 1, p1216 

    In this paper, we present that the numerical analysis by the two-dimensional finite element method to develop an evaluation system for hardening by a magnetic sensor, which can distinguish the change of magnetic properties of hardened steels. Moreover, some measured results are discussed to...

  • Numerical analysis of the roller hemming process. Hu, Xing; Zhao, Yixi; Huang, Sheng; Li, Shuhui; Lin, Zhongqin // International Journal of Advanced Manufacturing Technology;Sep2012, Vol. 62 Issue 5-8, p543 

    Numerical simulation of the roller hemming process is studied in this approach. Combined hardening is used for steel panel BSUFD roller hemming. Meshes are produced based on the deformation state of the panel. Tools are set up for flanging, pre-hemming, and final hemming. Roll-in/out results are...

  • Numerical simulation of gear surface hardening using the finite element method. He, Bin; Huang, Shan; He, Xiaolin // International Journal of Advanced Manufacturing Technology;Sep2014, Vol. 74 Issue 5-8, p665 

    This paper was devoted to presenting a systematic approach based on finite element method to numerical analysis of gear surface hardening with the consideration of the contact problem. After the contact finite element method theory of gear and rack was introduced, the numerical analysis of gear...

  • Finite strain plasticity, the stress condition and a complete shell model. Areias, Pedro M. A.; Ritto-Corrêa, Manuel C.; Martins, João A. C. // Computational Mechanics;Jan2010, Vol. 45 Issue 2/3, p189 

    The null stress ( s33 = 0) and incompressibility ( J = 1) conditions in finite strain elasto-plastic shell analysis are studied in closed-form and implemented with a variant of the combined control by Ritto-Corrêa and Camotim. Coupling between constitutive laws and shell kinematics results...

  • DAÄ°RESEL DELÄ°KLÄ° DÄ°KDÖRTGEN LEVHANIN H-TÄ°PÄ° SONLU ELEMANLAR Ä°LE UYARLAMALI ANALÄ°ZÄ°. Alyavuz, Bahadır // Journal of the Faculty of Engineering & Architecture of Gazi Uni;Mar2007, Vol. 22 Issue 1, p39 

    Stress analysis of rectangular plates with a circular hole is carried out by a program written in MATLAB® environment and iterative h-version adaptive finite element method. Two different approaches were used in the adaptive solution of loaded plate. In the first one, stress calculation was...

  • STIFFENED PLATES SUBJECTED TO UNIFORM BLAST LOADING. Kadid, Abdelkrim // Journal of Civil Engineering & Management;2008, Vol. 14 Issue 3, p155 

    An investigation has been carried out to examine the behaviour of stiffened plates subjected to uniform blast loading. The aim of this work is to determine the dynamic response of the plates with different stiffener configurations and consider the effect of mesh dependency, loading duration, and...

  • Dynamics of Composite Plate by Experiment and Finite Element Analysis. Ullah, Israr; Sinha, Jyoti K. // European Journal of Scientific Research;6/ 1/2011, Vol. 55 Issue 2, p207 

    Dynamics of the composite plate has been compared between the experimental results and the prediction by the finite element (FE) models using different element types in the ABAQUS FE code. Total 8 FE models have been used for this comparison. Initially the calculated natural frequencies by each...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics