An “optics prescription” for a tunnel furnace

Pidanov, I. N.
January 2010
Measurement Techniques;Jan2010, Vol. 53 Issue 1, p74
Academic Journal
The factors which affect the reliability of the readings of pyrometers when measuring the temperature in the channel of a tunnel furnace are considered.


Related Articles

  • Bicolor pyroreflectometer using an optical fiber probe. Hernandez, D.; Olalde, G.; Beck, A.; Milcent, E. // Review of Scientific Instruments;Dec1995, Vol. 66 Issue 12, p5548 

    Presents a method and a device for measuring temperature using bicolor optical pyrometry. Description of the pyroreflectometer; Components and parts; Design diagram; Sample application on oxides of rare earth powders.

  • More than just POINT & SHOOT. Rowe, Martin // Test & Measurement World;Dec2003/Jan2004, Vol. 23 Issue 12, p35 

    Focuses on issues related to the calibration of infrared (IR) thermometers and imaging cameras. Significance for an accurate temperature sources and good calibration in achieving optimal results; Factors needed to be considered in the calibration of IR thermometer or camera; Function of thermal...

  • Temperature Transducers their specification and use. Busser, John H. // BioScience;9/1/1970, Vol. 20 Issue 17, p969 

    The article offers information of specification and uses of temperature Transducers. It notes that there are four of instruments useful to the biologist limited range of measurement. Optical Pyrometers are not cheap and have limitations in the ranges of temperature. Thermometers are cheap and...

  • Hot Forming Aerospace Nuts -- and Capturing Temperature Data. Daly, Brett // Fastener Technology International;Feb/Mar2013, Vol. 36 Issue 1, p40 

    The article informs that the manufacturer of induction heating systems Ambrell has installed its EKO-HEAT induction heating system at a fastener manufacturer's facility. It mentions that the manufacturer came to Ambrell requiring a complete solution to measure and record temperature information...

  • A high spatial resolution optical pyrometer. Nason, D. O.; Yen, C. T.; Feigelson, R. S.; Tiller, W. A. // Review of Scientific Instruments;Mar90, Vol. 61 Issue 3, p1024 

    An optical pyrometer has been developed which resolves 20 µm at a working distance of 24 in. and measures relative temperature differences of ±2 °C over the range 1000-2000 °C. The instrument is particularly suitable for measuring temperature or emissivity distributions in very small...

  • Fiber-coupled optical pyrometer for shock-wave studies. Holmes, N.C. // Review of Scientific Instruments;Mar95, Vol. 66 Issue 3, p2615 

    Describes an optical pyrometer with unique advantages for shock-wave studies and for measurements of systems that are moving with respect to the detection system. Design goals including providing the capability to make accurate, calibrated temperature measurements; Application of the instrument...

  • Improving Gas Turbine Operating Efficiency using Optical Pyrometry.  // Modern Power Systems;2004/2005 Supplement, p34 

    Focuses on the significance of optical pyrometers on the improvement of the operating efficiency of gas turbines. Ability of optical pyrometers to monitor the temperatures of individual blades within the host section of the gas turbine; Benefits brought by these measurements on power utility...

  • In situ diagnostics of film thickness and surface roughness of diamond films on a Ti–6Al–4V alloy by optical pyrometry. Catledge, Shane A.; Comer, Walton; Vohra, Yogesh K. // Applied Physics Letters;7/13/1998, Vol. 73 Issue 2 

    The thickness and surface roughness of diamond films grown on a Ti–6Al–4V alloy in a microwave plasma reactor was measured in situ using optical pyrometry. The growing film results in oscillations of the apparent temperature with time, which can be explained by interference effects...

  • Shock wave initiation of liquid explosives. Gogulya, M. F.; Dolgoborodov, A. Yu.; Brazhnikov, M. A.; Dushenok, S. A. // AIP Conference Proceedings;2000, Vol. 505 Issue 1, p903 

    Optical pyrometry is used to study initiation and propagation of detonation in homogeneous liquid high explosives (LHE): bis-(2-fluoro-2,2-dinitroethylformal), isopropyl nitrate and 1,6-diazido-2-acetoxyhexane. The brightness temperature profiles are measured at various intensities of the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics