TITLE

Investigation of the flow of molten tellurite glass in a double-crucible die

AUTHOR(S)
Shabarov, V. V.; Snopatin, G. E.; Churbanov, M. F.
PUB. DATE
April 2010
SOURCE
Theoretical Foundations of Chemical Engineering;Apr2010, Vol. 44 Issue 2, p206
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The viscoplastic flow of molten tellurite glass realized during the process of the drawing of an optical fiber through a double-crucible die was numerically investigated. The procedure for the computational experiment and the results of the simulation, including those obtained under local temperature disturbances, regarding the interactions between the melts in the die outlet part during the starting and stationary flow stages were described. The computational investigations were performed with the use of the ANSYS CFX software.
ACCESSION #
50034981

 

Related Articles

  • Dispersion and its Management in Single Mode Optical Fibres at High Speed Optical Networks. Sharma, R. L. // International Transactions in Applied Sciences;Oct2010, Vol. 2 Issue 4, p685 

    This paper deals with the dispersion in single mode optical fibre at high speed optical networks. Dispersion takes place at all speeds, and becomes predominant at high data rate. However, pulse spreading caused by chromatic dispersion, particularly, needs to be taken care of more seriously....

  • RC-timed shutoff function uses op amp and momentary switch. Chenier, Glen // EDN Europe;Jun2012, p18 

    The article reports on how a handheld, battery-operated fiber finder measures the light escaping from an optical fiber when clamped in a V-shaped block under slight pressure. With no room on the front panel for a power switch, the design requires a sliding clamp mechanism to turn the unit on at...

  • COMPLEX modulation comes to OPTICAL FIBER. Rowe, Martin // Test & Measurement World;Mar2010, Vol. 30 Issue 2, p28 

    The article discusses the complex modulation that comes to optical fiber in the U.S. It states that the new modulation schemes are necessary to handle long-distance transmissions or the long-haul transmissions compared to short-haul communications or the client side. It mentions several...

  • Experimental technique for simultaneous measurement of absorption-, emission cross-sections, and background loss coefficient in doped optical fibers. Karimi, M.; Seraji, F. E. // Applied Physics B: Lasers & Optics;Jan2010, Vol. 98 Issue 1, p113 

    We report a new simple technique for the simultaneous measurements of absorption-, emission cross-sections, background loss coefficient, and dopant density of doped optical fibers with low dopant concentration. Using our proposed technique, the experimental characterization of a sample...

  • Athermal sensing with optical fibre Bragg gratings and long-period gratings. Swart, Pieter L. // South African Journal of Science;May/Jun2005, Vol. 101 Issue 5/6, p278 

    This paper presents a brief overview of two techniques to circumvent the large temperature sensitivities of fibre Bragg gratings and long-period gratings in sensing applications. The first technique employs the different temperature dependencies of the effective refractive indices of the core...

  • Optical fiber imaging for high speed plasma motion diagnostics: Applied to low voltage circuit breakers. McBride, J. W.; Balestrero, A.; Ghezzi, L.; Tribulato, G.; Cross, K. J. // Review of Scientific Instruments;May2010, Vol. 81 Issue 5, p055109 

    An integrated portable measurement system is described for the study of high speed and high temperature unsteady plasma flows such as those found in the vicinity of high current switching arcs. An array of optical fibers allows the formation of low spatial resolution images, with a maximum...

  • Fabrication of functional microstructured optical fibers through a selective-filling technique. Huang, Yanyi; Xu, Yong; Yariv, Amnon // Applied Physics Letters;11/29/2004, Vol. 85 Issue 22, p5182 

    We develop a method for the fabrication of functional microstructured optical fibers (MOFs) by selectively filling the air holes with liquid phase materials, where we utilize the dependence of filling speed on the size of the air holes. As a demonstration, we construct a hybrid MOF by filling...

  • Optical fiber-based biosensors. Monk, David J.; Walt, David R. // Analytical & Bioanalytical Chemistry;Aug2004, Vol. 379 Issue 7/8, p931 

    This review outlines optical fiber-based biosensor research from January 2001 through September 2003 and was written to complement the previous review in this journal by Marazuela and Moreno-Bondi. Optical fiber-based biosensors combine the use of a biological recognition element with an optical...

  • Dynamic micro-air-bubble drifted in a liquid core fiber Fabry-Pérot interferometer for directional fiber-optic level meter. Lee, Cheng-Ling; Zheng, Yang-Chen; Ma, Chia-Lien; Chang, Han-Jung; Lee, Chung-Fen // Applied Physics Letters;5/13/2013, Vol. 102 Issue 19, p193504 

    We propose a dynamic, directional, and miniature fiber-optic level meter based on a micro-air-bubble drifted in a liquid-core fiber Fabry-Pérot interferometer. The proposed in-fiber level meter can detect the non-horizontal/horizontal state of an object/structure and also be able to...

Share

Read the Article

Courtesy of NEW JERSEY STATE LIBRARY

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics