TITLE

A novel water resistor divider with a coaxial low-voltage arm

AUTHOR(S)
Jia, Wei; Chen, Weiqing; Mao, Congguang; Zeng, Jiangtao
PUB. DATE
March 2010
SOURCE
Review of Scientific Instruments;Mar2010, Vol. 81 Issue 3, p034703
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A new style high voltage resistor divider made of saline solution has been constructed and tested. A coaxial construction is used on the low-voltage arm, as the signal extraction electrode, which can increase the attenuation ratio of the divider. The time response of divider limited by the stray parameter also can be improved. Comparing the results of calibrated experiment with the commonly used equal size copper sulfate dividers, the new probe has nearly five times increase in the attenuation ratio. The time response of the new style divider in the dimension of 30 mm in diameter and 400 mm in length can reach to 1 ns.
ACCESSION #
48911768

 

Related Articles

  • Mini metrology lab. Hoffman, Conrad R. // Electronics Now;May96, Vol. 67 Issue 5, p39 

    Presents a discussion on how to build a Kelvin-Varley voltage divider. Mechanism behind the divider; Parts list; Design issue; Selection of resistors; Assembly of the divider; Adjustment of padding networks.

  • Harmonic Reduction In Three-Phase Parallel Connected Inverter. Younis, M. A. A.; Rahim, N. A.; Mekhilef, S. // Proceedings of World Academy of Science: Engineering & Technolog;Feb2009 Supplement, Vol. 50, p1035 

    This paper presents the design and analysis of a parallel connected inverter configuration of. The configuration consists of parallel connected three-phase dc/ac inverter. Series resistors added to the inverter output to maintain same current in each inverter of the two parallel inverters, and...

  • Electrical noise in gold nanocluster sensors. Kruppa, W.; Ancona, M. G.; Rendell, R. W.; Snow, A. W.; Foos, E. E.; Bass, R. // Applied Physics Letters;1/30/2006, Vol. 88 Issue 5, p053120 

    Motivated by applications to chemiresistive vapor sensing, the electrical noise properties of large-area gold nanocluster films are investigated experimentally. Measurements show thermal noise to dominate at low voltages and high frequencies, with a 1/f noise component becoming more important at...

  • Design of Micro Power Consumption Synchronous Chopped Wave Power Supply Based on Fixed and Mobile Double Comparative Point. Longteng Wang; Jun Lin; Hui Su // Advanced Materials Research;2014, Vol. 986-987, p1794 

    This paper proposes a design method of the micro power consumption synchronous chopped wave and low-power switching power supply based on fixed and mobile double comparative point. The output of this power supply ranges from 5V to 200V. It overcomes the residual voltage effect after the bridge...

  • Realization of Π-type attenuator using Ti(N) thin films for the fourth generation of mobile telecommunications. Cuong, Nguyen Duy; Yoon, Soon-Gil; Kim, Dong-Jin // Applied Physics Letters;11/12/2007, Vol. 91 Issue 20, p203502 

    The performances of 20 dB and 25 W Π-type attenuators prepared using Ti(N) thin film resistors on AlN substrates were investigated at applied frequencies of 3 and 6 GHz. An attenuation and voltage standing wave ratio (VSWR) were significantly improved by a design of L/W (length/width) ratios...

  • Realization of Negative Group Delay Network Using Defected Microstrip Structure. Chaudhary, Girdhari; Yongchae Jeong; Jongsik Lim // International Journal of Antennas & Propagation;2014, p1 

    A design of negative group delay (NGD) networks using a U-shaped defected microstrip structure (DMS) and lumped elements is presented in this paper. The signal attenuation characteristics of DMS were utilized to get NGD time. The group delay (GD) time and signal attenuation of the proposed...

  • Low voltage and high transmittance blue-phase liquid crystal displays with corrugated electrodes. Meizi Jiao; Yan Li; Shin-Tson Wu // Applied Physics Letters;1/4/2010, Vol. 96 Issue 1, p011102 

    A low voltage (<10 V) and high transmittance (∼85.6%) polymer-stabilized blue-phase liquid crystal (BPLC) display is proposed. The periodic corrugated electrodes generate a strong horizontal field component to induce isotropic-to-anisotropic transition in the BPLC medium through Kerr...

  • Once Upon a Studer. Ciletti, Eddie // Mix;Dec2006, Vol. 30 Issue 12, p80 

    The article investigates the causes for the heating up of the soft power-up circuits in Multitrack recording device, Studer A827. The author finds that the power resistors are placed behind the circuit board which causes the rear panel of the power supply get heated up. The author conducted a...

  • the best of MAY.  // New Orleans Homes & Lifestyles;May2007, Vol. 9 Issue 5, p31 

    The article discusses various reports published within the issue, including one by Karie Meltzer on different bathroom designs and another by S.L. Strachan on hot and cool kitchen designs.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics