TITLE

Electrode artifacts in low resistance organic spin valves

AUTHOR(S)
Riminucci, Alberto; Prezioso, Mirko; Graziosi, Patrizio; Newby, Carol
PUB. DATE
March 2010
SOURCE
Applied Physics Letters;3/15/2010, Vol. 96 Issue 11, p112505
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Artifacts can originate from the inherent shortcomings of the cross bar configuration, when the resistance of the device is small compared to that of one of the electrodes. This is particularly relevant to the field of organic spintronics, in which at least one recent work overlooked this effect. We use a simplified one-dimensional resistor model and a full three-dimensional finite element method simulation to show that an increase in the resistance of one electrode appears as a decrease of the measured resistance. We found that the model agrees qualitatively but not quantitatively with observation.
ACCESSION #
48698107

 

Related Articles

  • The impedance method in the theory of surface acoustic waves in periodic structures. Biryukov, S. V.; Weihnacht, M. // Journal of Applied Physics;9/15/2004, Vol. 96 Issue 6, p3117 

    A method for determining surface impedances of periodic structures is proposed. The method is based on Biryukov’s equation for the surface impedance matrix of an inhomogeneous medium. This nonlinear integro-differential equation relates the impedance matrix with material parameter...

  • POTENTIAL DROP MAPPING FOR CORROSION MONITORING. Sposito, G.; Cawley, P.; Nagy, P. B. // AIP Conference Proceedings;3/3/2009, Vol. 1096 Issue 1, p279 

    The present study evaluates the accuracy with which the depth of defects due to corrosion/erosion on the far surface can be estimated by means of low-frequency Potential Drop measurements, as a function of defect size and probe geometry. A novel array probe configuration, in which the injecting...

  • Analysis of Electromechanical Stress Singularity in Piezoelectrics by Computed Eigensolutions and Hybrid-trefftz Finite Element Models. Wang, H.; Sze, K.; Yang, X. M. // Computational Mechanics;Dec2006, Vol. 38 Issue 6, p551 

    This paper concerns the determination of singular electromechanical stress field in piezoelectrics. A one-dimensional finite element procedure is generalized to compute the eigensolutions of the singular electromechanical field. The generalized procedure is capable of taking differently poled...

  • Effect of magnetic bias field on magnetoelectric coupling in magnetoelectric composites. Liu, Y.X.; Wan, J.G.; Liu, J.-M.; Nan, C.W. // Journal of Applied Physics;10/15/2003, Vol. 94 Issue 8, p5118 

    The effect of dc magnetic bias field on the magnetoelectric coupling of a two-component magnetoelectric composite structure is investigated numerically using the finite-element method, in which the nonlinear magnetostress coupling for the magnetostrictive component is taken into account. It is...

  • Spintronic properties of zigzag-edged triangular graphene flakes. Şahin, H.; Senger, R. T.; Ciraci, S. // Journal of Applied Physics;Oct2010, Vol. 108 Issue 7, p074301 

    We investigate quantum transport properties of triangular graphene flakes with zigzag edges by using first principles calculations. Triangular graphene flakes have large magnetic moments which vary with the number of hydrogen atoms terminating its edge atoms and scale with its size. Electronic...

  • Dependence of giant magnetoelectric effect on interfacial bonding for multiferroic laminated composites of rare-earth-iron alloys and lead–zirconate–titanate. Gang Liu; Ce-Wen Nan; Ning Cai; Yuanhua Lin // Journal of Applied Physics;3/1/2004, Vol. 95 Issue 5, p2660 

    The giant magnetoelectric effect of laminated composites of rare-earth-iron alloys (Terfenol-D) and lead–zirconate–titanate (PZT) is calculated by using the finite element method. Our simulations show that the magnetoelectric response of the laminated Terfenol-D/PZT composites is...

  • Comparative study on stress�strain hysteresis response of SAC solder joints under thermal cycles. Shirazi, Alireza; Varvani-Farahani, Ahmad; Hua Lu // International Journal of Fracture;Jun2008, Vol. 151 Issue 2, p135 

    The present study attempts to evaluate the stress-strain hysteresis responses of SAC solder joints in Resistor and FleXBGA144 packages subjected to thermal cyclic loading using several constitutive models. The total deformation of the solder material consists of elastic, rate-independent plastic...

  • Patents Relevant to Spintronic Memristor. Wang, Xiaobin; Chen, Yiran // Recent Patents on Electrical Engineering;2010, Vol. 3 Issue 1, p10 

    Patents relevant to spintronic memristor devices are reviewed. These patterns are selected from the categories of memristor, spintronic device, magnetic tunneling junction and magnetic domain wall devices. These patents address the questions of how to build spintronic memristor and how to use...

  • Characterization of a single cell of Chlorella in a microfluidic channel using amperometric electrode arrays. Song, Young; Bai, Seoung // Biotechnology Letters;Nov2014, Vol. 36 Issue 11, p2185 

    Electrochemical characteristics of O and/or mediators secreted by a single cell of Chlorella fusea were analyzed by using amperometric measurements on microelectrodes embedded in a microfluidic device. A single cell was trapped in a microfluidic channel, which simplifies the mass transfer...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics