Analyses of high power negative ion accelerators for ITER neutral beam injector (invited)

Kashiwagi, M.; Taniguchi, M.; Dairaku, M.; Grisham, L. R.; Hanada, M.; Mizuno, T.; Tobari, H.; Umeda, N.; Watanabe, K.; Sakamoto, K.; Inoue, T.
February 2010
Review of Scientific Instruments;Feb2010, Vol. 81 Issue 2, p02B113
Academic Journal
In JAEA, research and developments to realize high power accelerator (1 MeV, 40 AD- ion beams for 3600 s) for ITER have been carried out experimentally and numerically utilizing a five stage MAMuG (Multiaperture, Multigrid) accelerator. In this paper, the extension of the gap length, which is required to improve the voltage holding capability, is examined in two dimensional beam optics analyses and also from view point of stripping loss of ions. In order to suppress excess power loadings due to the direct interception of negative ions, which is issued in long pulse tests, the beamlet deflection is analyzed in three dimensional multibeamlet analyses. The necessary modifications shown above are applied to the MAMuG accelerator for coming long pulse tests in JAEA and ITER.


Related Articles

  • An ESS system for ECRIS Emittance Research. Cao, Y.; Sun, L. T.; He, W.; Ma, L.; Zhang, Z. M.; Zhao, H. Y.; Zhao, H. W.; Zhang, X. Z.; Guo, X. H.; Ma, B. H.; Li, J.; Wang, H.; Li, J. Y.; Li, X. X.; Feng, Y. C.; Lu, W. // AIP Conference Proceedings;2005, Vol. 749 Issue 1, p231 

    An emittance scanner named Electric-Sweep Scanner had been designed and fabricated in IMP. And it has been set up on the LECR3 beam line for the ion beam quality study. With some development, the ESS system has become a relatively dependable and reliable emittance scanner. Its experiment error...

  • Beam emittance measurements of transformer coupled plasma ion source for focused ion beam. Yoon Jae Kim; Hong, I. S.; Kim, H. S.; Hwang, Y. S. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1681 

    A transformer coupled plasma (TCP) ion source has been tested in order to test its feasibility as a high brightness ion source for focused ion beam. When operating the TCP ion source with filter magnets in front of plasma electrode for a negative ion source, lower emittances are expected....

  • Design studies for a H- ion extraction system. Ushakov, A.; Volk, K.; Klein, H.; Ratzinger, U. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1783 

    At the University of Frankfurt, a high current H- ion source was developed and tested. A H- beam current of 120 mA with an energy of 35 keV was extracted using an emission opening radius of 5 mm. This source was equipped with a diode extraction system. Thus, the extraction voltage determines the...

  • Acceptance of the channel for modification of materials (L3A) of the Tesla accelerator installation. Beličev, P.; Šiljegović, M.; Dobrosavljević, A.; Ne&scaronković, N. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1678 

    The channel for modification of materials (L3A) of the Tesla Accelerator Installation, in the Vincˇa Institute of Nuclear Sciences, connected to the mVINIS ion source, consists of an ion beam transport line and an interaction chamber enabling the ion beam assisted deposition. The 8.4 m long...

  • Direct current H- source for the medicine accelerator (invited). Belchenko, Yu.; Savkin, V. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1704 

    A compact cw hydrogen negative ion source having reliable operation and a simplified maintenance is developed at Budker Institute of Nuclear Physics for a tandem accelerator of boron capture neutron therapy installation. The source uses a Penning discharge with a hydrogen and cesium feed through...

  • Test results of 18 GHz ECR charge breeder for KEK–JAERI RNB facility. Jeong, S. C.; Oyaizu, M.; Tojyo, E.; Kawakami, H.; Ishiyama, H.; Miyatake, H.; Enomoto, K.; Watanabe, Y.; Katayama, I.; Nomura, T.; Matsuda, M.; Osa, A.; Ichikawa, S. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1631 

    Some of the test results of KEK ECR charge breeder made for KEK–JAERI RNB facility are presented and discussed. The charge breeding efficiencies for singly charged ions of noble gases have been measured; typically 13.5% of Ar9+, 10.4% of Kr12+, and 6.8% of Xe20+ with a global efficiency...

  • Numerical simulation multicomponent ion beam transport from ECR ion source. Ma, L.; Song, M. T.; Zhang, Z. M.; Cao, Y.; Chen, X. Y. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1494 

    We are developing a multicharged ion beam transport program. The program is dedicated to numerical simulation of the behavior of highly charged ion beam and optimization of beam optics in transport lines and is realized on a PC with Windows user interface of Microsoft Visual Basic. Among all the...

  • GTS-LHC: A New Source For The LHC Ion Injector Chain. Hill, C. E.; Küchler, D.; Scrivens, R.; Hitz, D.; Guillemet, L.; Leroy, R.; Pacquet, J. Y. // AIP Conference Proceedings;2005, Vol. 749 Issue 1, p127 

    The ion injector chain for the LHC has to be adapted and modified to reach the design beam parameters. Up to now an ECR4 delivered the ion beam for the SPS fixed target physics programme. This source will be replaced by a higher intensity source to produce the Pb27+ ion current required to fill...

  • Ghost Signals In Allison Emittance Scanners. Stockli, Martin P.; Leitner, M.; Moehs, D. P.; Keller, R.; Welton, R. F. // AIP Conference Proceedings;2005, Vol. 749 Issue 1, p108 

    For over 20 years, Allison scanners have been used to measure emittances of low-energy ion beams. We show that scanning large trajectory angles produces ghost signals caused by the sampled beamlet impacting on an electric deflection plate. The ghost signal strength is proportional to the amount...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics