Portable emittance measurement device

Liakin, D.; Seleznev, D.; Orlov, A.; Kuibeda, R.; Kropachev, G.; Kulevoy, T.; Yakushin, P.
February 2010
Review of Scientific Instruments;Feb2010, Vol. 81 Issue 2, p02B719
Academic Journal
In Institute for Theoretical and Experimental Physics (ITEP) the portable emittance measurements device is developed. It provides emittance measurements both with “pepper-pot” and “two slits” methods. Depending on the method of measurements, either slits or pepper-pot mask with scintillator are mounted on the two activators and are installed in two standard Balzer's cross chamber with CF-100 flanges. To match the angle resolution for measured beam, the length of the stainless steel pipe between two crosses changes is adjusted. The description of the device and results of emittance measurements at the ITEP ion source test bench are presented.


Related Articles

  • INVESTIGATION ON TWO-STAGE 300 HZ PULSE TUBE CRYOCOOLER. Cai, H. K.; Yang, L. W.; Hong, G. T.; Luo, E. C.; Zhou, Y. // AIP Conference Proceedings;4/9/2010, Vol. 1218 Issue 1, p60 

    In the past few years, ultra-high frequency pulse tube cryocoolers are becoming a research hotspot for their portability and compactness in aerospace and aviation applications. For preliminary research, a two-stage pulse tube cryocooler working at 300 Hz driven by a thermoacoustic engine is...

  • Study on creep deformation mechanism of 316LN stainless steel from impression creep tests. Naveena; Parameswaran, P.; Laha, K.; Mathew, M. D. // Materials at High Temperatures;May2014, Vol. 31 Issue 2, p180 

    Impression creep tests were carried out on 316LN stainless steel (SS) at various temperatures in the range 898-973 K. The stress dependence of the steady state impression velocity followed the power-law with stress exponent n = 6. The temperature dependence of the steady state impression...

  • Effect of irradiation on preliminarily radiation-oxidation-treated stainless steel. Agaev, T. // Metal Science & Heat Treatment;Jan2009, Vol. 51 Issue 1/2, p49 

    Radiolytic processes of decomposition of water on specimens of stainless steel subjected to preliminary radiation-oxidation treatment are studied.

  • Effect of Acidic Environment on the Surface Microhardness of Biodentineâ„¢. Poplai, Gaurav; Jadhav, Sameer K.; Hegde, Vivek // World Journal of Dentistry;Apr-Jun2013, Vol. 4 Issue 2, p100 

    Aim: To compare the effects of various levels of acidic pH on surface microhardness of Biodentine.â„¢ Materials and methods: Biodentine was mixed and packed into stainless steel molds (diameter = 5 mm and height = 1.5 mm). Four groups of 10 specimens each were formed and exposed to pH: 7.4,...

  • STRONG, CORROSION-RESISTANT STAINLESS STEEL. Wert, David E.; DiSabella, Ryan P. // Advanced Materials & Processes;Aug2006, Vol. 164 Issue 8, p34 

    The article describes the characteristics of Custom 465 stainless steel alloy. The material brings together corrosion resistance, strength, and toughness. The alloy's structure in a solution-annealed and cold-treated condition is a ductile iron-nickel martensite with low rate of work hardening...

  • Understanding Stainless Steel Heat-Affected Zones. C. Meadows; Fritz, J. D. // Welding Journal;Jul2005, Vol. 84 Issue 7, p26 

    Focuses on the structural changes that occur in the heat-affected zone of stainless steel weldments. Need to understand which grades of stainless steel are susceptible; Division of stainless steels into families characterized by phases present in the microstructure; Avoidance of excessive grain...

  • Strenthening mechanisms in nanostructured copper/304 stainless steel multilayers. Zhang, X.; Misra, A.; Wang, H.; Shen, T. D.; Swadener, J. G.; Embury, J. D.; Kung, H.; Hoagland, R. G.; Natasi, M. // Journal of Materials Research;Jul2003, Vol. 18 Issue 7, p1600 

    Presents a study that focused on the strengthening mechanisms in nanostructured copper/304 stainless steel multilayers. Experimental procedures; Results of the study; Conclusions.

  • The Strength of AISI 304L Rolled Sheet Steel with Thickness up to 25 mm. Stepanov, G. // Chemical & Petroleum Engineering;May/Jun2005, Vol. 41 Issue 5/6, p287 

    An analysis is presented of the documentation on AISI 304L sheet rolled steel, together with the certificates of the manufacturers and the results from input tests on the mechanical properties of this steel. The yield point and ultimate strength of AISI 304L steel of thickness up to 25 mm are...

  • Cold-isopress-based process for fabrication of stainless steel micromachine components. Imbaby, M.; Jiang, K. // Micro & Nano Letters;Sep2009, Vol. 4 Issue 3, p160 

    This Letter presents in detail a new process for the fabrication of 3D stainless steel microcomponents using cold-isopressing techniques. The process starts by producing deep SU-8 master moulds and their negative soft micromoulds in polydimethylsiloxane (PDMS), preparing stainless steel...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics