TITLE

Three-dimensional bulk metamaterials operating in the terahertz range

AUTHOR(S)
Miyamaru, Fumiaki; Kuboda, Shiro; Taima, Kazuo; Takano, Keisuke; Hangyo, Masanori; Takeda, Mitsuo Wada
PUB. DATE
February 2010
SOURCE
Applied Physics Letters;Feb2010, Vol. 96 Issue 8, p081105
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Three-dimensional bulk metamaterials that operate in the terahertz (THz) frequency range were fabricated by stacking 100 two-dimensional sheets containing metallic split-ring resonators (SRR) on thin polyethylene terephthalate film substrates. The THz magnetic resonance for the incident magnetic field perpendicular to the plane of the SRR structure was measured. We also investigated the dependence of the magnetic resonant strength on the metal thickness.
ACCESSION #
48352182

 

Related Articles

  • Metal-cavity surface-emitting microlaser at room temperature. Chien-Yao Lu; Shu-Wei Chang; Shun Lien Chuang; Germann, Tim D.; Bimberg, Dieter // Applied Physics Letters;6/21/2010, Vol. 96 Issue 25, p251101 

    We propose and realize a substrate-free metal-cavity surface-emitting microlaser with both top and sidewall metal and a bottom distributed Bragg reflector as the cavity structure. The transfer-matrix method is used to design the laser structure based on the round-trip resonance condition inside...

  • Self-passivation of transparent single-walled carbon nanotube films on plastic substrates by microwave-induced rapid nanowelding. Tark Han, Joong; Kim, Daeho; Suk Kim, Jun; Kwon Seol, Seung; Yol Jeong, Seung; Jin Jeong, Hee; Suk Chang, Won; Lee, Geon-Woong; Jung, Sunshin // Applied Physics Letters;4/16/2012, Vol. 100 Issue 16, p163120 

    We developed a straightforward method for enhancing the environmental stability of transparent single-walled carbon nanotube (SWCNT) network films on plastic substrates using a rapid microwave heating to produce SWCNT film-substrate nanowelding without any chemicals. The selective heating of...

  • Polarimetric studies of polyethylene terephtalate flexible substrates. M. Stchakovsky; E. Garcia-Caurel; M. Warenghem // European Physical Journal - Applied Physics;Dec2008, Vol. 44 Issue 3, p229 

    Polymer sheets are currently used worldwide in a wide range of applications. The manufacturing process of these sheets involves extruding machines that stretch the material in both lateral and longitudinal directions with respect to the machine direction, thus inducing birefringence. In most...

  • Fabrication of large area flexible organic solar cell using semiconductor process. Yu-Jen Hsiao; Lai-Fu Tsai; Chien-Wei Liu; Sheng-Hung Chou; Bau-Tong Dai // Proceedings of World Academy of Science: Engineering & Technolog;May2009, Vol. 53, p1429 

    We report on the realization of high-efficiency heterojunction PV devices based on P3HT/PCBM on transparent plastic substrates PET, from one elementary cell to large area modules. The first target consists in the optimisation of the processing parameters in order to obtain the highest possible...

  • Temperature Dependent Mechanical Analysis of Chalcogenide (CdS, ZnS) Coated PET Films. Gupta, Sandhya; Sharma, Kananbala; Saxena, N. S. // ISRN Polymer Science;2013, p1 

    Commercial polyethylene terephthalate (PET) film has been used as flexible substrate, and chalcogenide materials such as CdS, ZnS have been coated separately on PET film using vacuum thermal evaporation method. The structural characterisation of CdS-PET and ZnS-PET films has been performed by...

  • Direct Fabrication Route to Plastic-Supported Gold Nanoparticles for Flexible NIR-SERS. Bianco, Giuseppe; Losurdo, Maria; Giangregorio, Maria; Capezzuto, Pio; Bruno, Giovanni // Plasmonics;Mar2013, Vol. 8 Issue 1, p159 

    Stable gold nanoparticles with surface plasmon resonance tunable from visible (Vis) to near-infrared (NIR) are deposited via a direct sputtering methodology on large area polyethylene terephthalate (PET) to be used as effective, flexible NIR surface-enhanced Raman scattering (SERS) substrates....

  • Comparison of cadmium sulfide thin films deposited on glass and polyethylene terephthalate substrates with thermal evaporation for solar cell applications. Faraj, M.; Ibrahim, K. // Journal of Materials Science: Materials in Electronics;Jun2012, Vol. 23 Issue 6, p1219 

    Cadmium sulfide (CdS) thin films have been deposited onto glass and polyethylene terephthalate (PET) substrates at room temperature with thermal evaporation in a vacuum of about 3 × 10 Torr for use as window materials for solar cells. Effects of substrate types on the structural and optical...

  • Flexible photodetectors on plastic substrates by use of printing transferred single-crystal germanium membranes. Yuan, Hao-Chih; Shin, Jonghyun; Qin, Guoxuan; Sun, Lei; Bhattacharya, Pallab; Lagally, Max G.; Celler, George K.; Ma, Zhenqiang // Applied Physics Letters;1/5/2009, Vol. 94 Issue 1, p013102 

    This letter presents studies of multiwavelength flexible photodetectors on a plastic substrate by use of printing transferred single-crystal germanium (Ge) membranes. Ge membranes of 250 nm thickness with selectively ion-implantation doped regions were released from a germanium-on-insulator...

  • Ultra fast polymer network blue phase liquid crystals. Hussain, Zakir; Masutani, Akira; Danner, David; Pleis, Frank; Hollfelder, Nadine; Nelles, Gabriele; Kilickiran, Pinar // Journal of Applied Physics;Jun2011, Vol. 109 Issue 11, p114513 

    Polymer-stabilization of blue phase liquid crystal systems within a host polymer network are reported, which enables ultrafast switching flexible displays. Our newly developed method to stabilize the blue phase in an existing polymer network (e.g., that of a polymer network liquid crystal; PNLC)...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics