TITLE

Balanced charge transport and enhanced white electroluminescence from a single white emissive polymer via thermal annealing

AUTHOR(S)
Xiaodi Niu; Baohua Zhang; Zhiyuan Xie; Yanxiang Cheng; Lixiang Wang
PUB. DATE
February 2010
SOURCE
Applied Physics Letters;2/15/2010, Vol. 96 Issue 7, p073303
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The effect of thermal annealing on electroluminescence of polyfluorene-based single white emissive polymer is demonstrated. Both color purity and light-emitting efficiency of the devices are enhanced via thermal annealing. It is found that thermal annealing can induce the formation of crystalline polyfluorene phase that acts as an efficient blue fluorescent dopant for enhancing blue emission and hence color purity of the white light. Most importantly, the hole and electron transport is balanced after thermal annealing that favors improving the light-emitting efficiency. A light-emitting efficiency of 10 cd/A is achieved after thermal annealing, about 30% increase compared to the as-produced device.
ACCESSION #
48199493

 

Related Articles

  • Ultraviolet electroluminescence and blue-green phosphorescence using an organic diphosphine oxide charge transporting layer. Burrows, P. E.; Padmaperuma, A. B.; Sapochak, L. S.; Djurovich, P.; Thompson, M. E. // Applied Physics Letters;5/1/2006, Vol. 88 Issue 18, p183503 

    We report electroluminescence at 338 nm from a simple bilayer organic light-emitting device (OLED) made using 4,4′-bis(diphenylphosphine oxide) biphenyl (PO1). In an OLED geometry, the material is preferentially electron transporting. Doping the PO1 layer with...

  • Polymer gel light-emitting devices. Shun-Chi Chang; Yang Yang // Applied Physics Letters;11/1/1999, Vol. 75 Issue 18, p2713 

    Reports on the generation of luminescence from a polymer gel in a compact cell configuration. Device structure of the gel light-emitting device (GLED); Consistency of the emission spectrum with the photoluminescence spectrum obtained from the polymer gel.

  • Synthesis of Benzothiadiazole-Based Liquid Crystalline Polyacrylates for Polarized Light Emitting Diodes. Yung-Hsin Yao; Liang-Rern Kung; Chain-Shu Hsu // Journal of Polymer Research;Oct2006, Vol. 13 Issue 4, p277 

    Two benzothiadiazole-based liquid crystalline polyacrylates were synthesized. These polymers revealed a nematic liquid crystal phase and exhibited photoluminescence as well as polarized electroluminescence when incorporated into light-emitting diode applications. The polymers showed dichroic...

  • Very low turn-on voltage and high brightness tris-(8-hydroxyquinoline) aluminum-based organic light-emitting diodes with a MoOx p-doping layer. Guohua Xie; Yanlong Meng; Fengmin Wu; Chen Tao; Dandan Zhang; Mingjun Liu; Qin Xue; Wen Chen; Yi Zhao // Applied Physics Letters;3/3/2008, Vol. 92 Issue 9, p093305 

    We have demonstrated an organic light-emitting diode based on molybdenum oxide (MoOx) doped 4,4′,4″-tris(3-methylphenylphenylamino)triphenylamine (m-MTDATA) as a p-type doping hole injection layer. The tris-(8-hydroxyquinoline) aluminum (Alq3)-based organic light-emitting diodes show...

  • Highly efficient blue phosphorescent polymer light-emitting diodes by using interfacial modification. Lu Li; Jun Liu; Zhibin Yu; Qibing Pei // Applied Physics Letters;5/16/2011, Vol. 98 Issue 20, p201110 

    Solution processed highly efficient blue electrophosphorescent polymer light-emitting diodes have been fabricated containing an oligo(ethylene oxide) (PEO-DME) additive to enhance the electroluminescence efficiency. The addition of PEO-DME at 5-10 wt % effectively lowers both the electron and...

  • A novel green light-emitting material containing both hole and electron transporting units. Yingping Zou; Songting Tan; Zhuliang Yuan; Zongqiang Yu // Journal of Materials Science;Jul2005, Vol. 40 Issue 13, p3561 

    The article informs that organic light-emitting polymers have been the subject of intensive investigations because their luminescent properties may be fine tuned by manipulating their chemical structures and ease spin-coating and printing process. For most conjugated polymers, the injection and...

  • Long-range electron transport in random trapping models. Kundu, Kalyan; Izzo, Dora; Phillips, Philip // Journal of Chemical Physics;2/15/1988, Vol. 88 Issue 4, p2692 

    We extend the standard random trapping (RT) model of electron transport on d-dimensional hypercubic lattices to include long-range charge transfer. We show that for RT models, it is possible to decouple exactly the site energy disorder from the distance dependence of the hopping rate. We then...

  • Tuning emission color of electroluminescence from two organic interfacial exciplexes by modulating the thickness of middle gadolinium complex layer. Mingtao Li; Wenlian Li; Lili Chen; Zhiguo Kong; Bei Chu; Bin Li; ZhizhiHu; Zhiqiang Zhang // Applied Physics Letters;2/27/2006, Vol. 88 Issue 9, p091108 

    Electroluminescent colors of organic light-emitting diodes (OLEDs) can be tuned by modulating the thickness of gadolinium (Gd) complex layer sandwiched between an electron-transporting layer (ETL) and a hole-transporting layer (HTL). The emission colors, which originate from the two interfacial...

  • Extremely low-voltage driving of organic light-emitting diodes with a Cs-doped phenyldipyrenylphosphine oxide layer as an electron-injection layer. Oyamada, Takahito; Sasabe, Hiroyuki; Adachi, Chihaya; Murase, Seiichiro; Tominaga, Tsuyoshi; Maeda, Chiharu // Applied Physics Letters;1/17/2005, Vol. 86 Issue 3, p033503 

    We demonstrated efficient electron injection and transport in organic light-emitting diodes using an electron-transport layer (ETL) composed of a Cs and phenyldipyrenylphosphine oxide (POPy2) co-deposited layer. In particular, an ETL composed of a Cs:POPy2 layer with an atom:molar ratio of 1:2...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics