TITLE

Experimental verification of light induced field emission

AUTHOR(S)
Kher, S.; Dixit, A.; Rawat, D. N.; Sodha, M. S.
PUB. DATE
January 2010
SOURCE
Applied Physics Letters;1/25/2010, Vol. 96 Issue 4, p044101
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This letter reports the experimental verification of the recently predicted phenomenon that the electric field emission current from a negatively charged surface gets enhanced by incidence of light (even of frequency below the photoelectric threshold) on the cathode.
ACCESSION #
47807474

 

Related Articles

  • Comparison of CsBr and KBr covered Cu photocathodes: Effects of laser irradiation and work function changes. He, Weidong; Vilayurganapathy, Subramanian; Joly, Alan G.; Droubay, Tim C.; Chambers, Scott A.; Maldonado, Juan R.; Hess, Wayne P. // Applied Physics Letters;2/18/2013, Vol. 102 Issue 7, p071604 

    Thin films of CsBr and KBr were deposited on Cu(100) to investigate photoemission properties of these potential photocathode materials. After prolonged laser ultraviolet irradiation photoemission, quantum efficiency increases by factors of 26 and 77 for KBr/Cu(100) and CsBr/Cu(100)...

  • Carbon velvet field-emission cathode. Shiffler, D.; Ruebush, M.; Haworth, M.; Umstattd, R.; LaCour, M.; Golby, K.; Zagar, D.; Knowles, T. // Review of Scientific Instruments;Dec2002, Vol. 73 Issue 12, p4358 

    Explosive field emission cathodes comprise an important class of cathodes for high power microwave tubes, having the advantages of light weight as well as requiring no heater for electron emission. Generally, however, this class of cathodes suffers from large amounts of outgassing, nonuniform...

  • Formation of extremely high current density LaB6 field emission arrays via e-beam deposition. Qi, K. C.; Lin, Z. L.; Chen, W. B.; Cao, G. C.; Cheng, J. B.; Sun, X. W. // Applied Physics Letters;9/1/2008, Vol. 93 Issue 9, p093503 

    In this paper, we report a Spindt-type field emission array (FEA) with LaB6 as the emitting material. The LaB6 emitters were deposited by e-beam evaporation with low oxide content. As LaB6 in its vapor form is active and absorbs large quantity of residual gases, which oxidizes the LaB6 films, a...

  • Influence ofsp 3 fraction on the field emission properties of tetrahedral amorphous carbon films formed by magnetic filtered plasma stream. Chen, D.H.; Li, Z.Y.; Wei, A.X. // Applied Physics A: Materials Science & Processing;Apr2005, Vol. 80 Issue 7, p1573 

    Electron field emission properties of tetrahedral amorphous carbon films (ta-C) with various sp3 fractions, [sp3]/([sp2]+[sp3]), prepared by magnetic filtered plasma deposition system, were investigated. The ta-C films were deposited on (100) n-Si wafer with a resistivity of 0.01-0.02 O?cm in a...

  • Highly monochromatic electron point-source beams. Morin, Roger; Fink, Hans-Werner // Applied Physics Letters;10/31/1994, Vol. 65 Issue 18, p2362 

    Examines the Cesium atom evaporation onto ultrasharp Tungsten field emitter tips for electron point sources. Use of the tips in field emission mode to depict electric current increases associated with atomic absorption; Difference of emitted electron energy distribution between the Cesium and...

  • Electron multiplier concentrator for integrated field-emission electronics. Il'ichev, É. A.; Kuleshov, A. E.; Poltoratskiĭ, É. A.; Rychkov, G. S. // Technical Physics Letters;Jan2010, Vol. 36 Issue 1, p19 

    We describe the design and technology of manufacturing an electron multiplier concentrator (EMC) that plays the role of a field-emission cathode capable of ensuring a significantly greater current density as compared to that provided by the existing electron emitters. Owing to the special design...

  • The 'nanotriode:' A nanoscale field-emission tube. Driskill-Smith, A.A.G.; Hasko, D.G.; Ahmed, H. // Applied Physics Letters;11/1/1999, Vol. 75 Issue 18, p2845 

    Characterizes a nanoscale electron tube with a field-emission cathode and a control gate. Emission of electrons from metal nanopillars; Radii of electrons; Vertical and horizontal dimensions of the nanochamber; Level of the turn-on voltage; Transconductance yield; Emission stability at room...

  • Triple-biprism electron interferometry. Harada, Ken; Matsuda, Tsuyoshi; Tonomura, Akira; Akashi, Tetsuya; Togawa, Yoshihiko // Journal of Applied Physics;6/1/2006, Vol. 99 Issue 11, p113502 

    Triple-biprism electron interferometry has been developed to flexibly control all interference parameters, i.e., interference region (size and shape), fringe spacing, and fringe angle. Each filament electrode of the upper and middle electron biprisms is installed in the individual image planes...

  • Investigation of field emission properties of carbon nanotube arrays defined using nanoimprint lithography. Vieira, Sara M. C.; Teo, Kenneth B. K.; Milne, William I.; Gröning, Oliver; Gangloff, Laurent; Minoux, Eric; Legagneux, Pierre // Applied Physics Letters;7/10/2006, Vol. 89 Issue 2, p022111 

    We demonstrate the use of nanoimprint lithography as an alternative low-cost fabrication route for the production of ordered arrays of individual carbon nanotube field emitters. A high emission site density of 4×105 cm-2 was observed and is well within the specification of the cathode for a...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics