TITLE

Adhesion, spreading and osteogenic differentiation of mesenchymal stem cells cultured on micropatterned amorphous diamond, titanium, tantalum and chromium coatings on silicon

AUTHOR(S)
Myllymaa, Sami; Kaivosoja, Emilia; Myllymaa, Katja; Sillat, Tarvo; Korhonen, Hannu; Lappalainen, Reijo; Konttinen, Yrjö T.
PUB. DATE
January 2010
SOURCE
Journal of Materials Science: Materials in Medicine;Jan2010, Vol. 21 Issue 1, p329
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
It was hypothesized that human mesenchymal stromal cell (hMSC) can be guided by patterned and plain amorphous diamond (AD), titanium (Ti), tantalum (Ta) and chromium (Cr) coatings, produced on silicon wafer using physical vapour deposition and photolithography. At 7.5 h hMSCs density was 3.0–3.5× higher ( P < 0.0003, except Ti) and cells were smaller (68 vs. 102 μm, P 0.000006–0.02) on patterns than on silicon background. HMSC-covered surface of the background silicon was lower on Ti than AD patterns ( P = 0.015), but at 5 days this had reversed ( P = 0.006). At 7.5 h focal vinculin adhesions and actin cytoskeleton were outgoing from pattern edges so cells assumed geometric square shapes. Patterns allowed induced osteogenesis, but less effectively than plain surfaces, except for AD, which could be used to avoid osseointegration. All these biomaterial patterns exert direct early, intermediate and late guidance on hMSCs and osteogenic differentiation, but indirect interactions exist with cells on silicon background.
ACCESSION #
47481443

 

Related Articles

  • Coatings with calcium and strontium phosphates and tantalum oxide on titanium for biomedical applications. Rudnev, V.; Yarovaya, T.; Medkov, M.; Nedozorov, P.; Kilin, K.; Lukiyanchuk, I.; Ustinov, A. // Protection of Metals & Physical Chemistry of Surfaces;Nov2015, Vol. 51 Issue 6, p968 

    Layered coatings of the composition Ca- and Sr-phosphate/TaO/TiO have been obtained by sequential application of plasma electrolytic oxidation (PEO) in an electrolyte with fluoride complexes of tantalum (stage I) and in one with tripolyphosphate complexes of Ca(II) and Sr(II) (stage II). Calcium...

  • Plasma-electrolytic formation of Ta-containing oxide coatings on titanium. Their composition and properties. Rudnev, V. S.; Medkov, M. A.; Kilin, K. N.; Ustinov, A. Yu.; Belobeletskaya, M. V.; Steblevskaya, N. I.; Mutylina, I. N.; Zherebtsov, T. O. // Protection of Metals & Physical Chemistry of Surfaces;Nov2013, Vol. 49 Issue 6, p717 

    Coatings with a thickness of 2–18 μm that contain up to 20 at % tantalum and Ta 2O 5 oxide phase are formed in an aqueous NH 4[TaF 6]-containing electrolyte for 2 min. The coatings are pierced with pores with a size of from 0.5 to 2 μm. The number of pores in the coatings can be...

  • Diamond coatings market shows growth.  // R&D Magazine;Nov2002, Vol. 44 Issue 11, p11 

    Highlights the growth in the diamond coatings market in the U.S. as of November 2002. Factor which contributed to the growth in the industry; Fabrication technologies which have emerged as of November 2002; Information on technological applications for diamond coatings.

  • Abrasive wear of plasma coatings with different structures on titanium alloys. Pokhmurs'kyi, V. I.; Kalakhan, O. S; Zavalii, I. Yu.; Okhota, H. H.; Denys, R. V. // Materials Science;Jul2004, Vol. 40 Issue 4, p504 

    We study the influence of plasma coatings having different structural and phase compositions on the serviceability of TS-5 titanium alloy under different kinds of abrasive wear. By means of X-ray phase analysis, we have detected significant changes in the composition of plasma coatings in...

  • Effect of TiN coating on corrosion resistance of dental NiCr alloy. HU Bin; CHEN Jie // Shanghai Journal of Stomatology;Feb2009, Vol. 18 Issue 1, p73 

    PURPOSE: To investigate the effect of titanium nitride coating on corrosion resistance of NiCr alloy in the simulate oral environment. METHODS: The NiCr alloy commonly used for porcelain crown was cast with specimen size of 10mmx10mmx3mm. Then the specimen was coated with a thickness of 2.5µm...

  • The effect of heat treatment of TiO2 coatings obtained by the sol-gel method on the corrosion resistance of chromium steel. Szałkowska, Ewa; Masalki, Jan; Kucharska, Barbara; Głuszek, Jözef // Materials Science (0137-1339);2005, Vol. 23 Issue 1, p137 

    The corrosion resistance of chromium steel without coating and with a four-layer one-component TiO2 coating has been examined in acidic sulphatic solution at pH 3.0 and the temperature of 25±0.2°C. TiO 2coatings were obtained by the sol-gel method. Ti(C3H70)4 (tetraisopropyl orthotitanate)...

  • Property Comparation of Ti-based and Cr-based PVD Nitride Coatings. Ai-hua LIU // Advanced Materials Research;2014, Issue 1033-1036, p292 

    In this paper, the properties of TiN, AlTiN, CrN and CrAlN coatings were studied and compared, include physical and mechanical properties and micro morphology. The result showed with addition of Al, ternary AlTiN and CrAlN coatings showed dense structure and high hardness compared with TiN and...

  • Structure and Properties of Ti–B–N, Ti–Cr–B–(N), and Cr–B–(N) Coatings Deposited by Magnetron Sputtering of Targets Prepared by Self-Propagating High-Temperature Synthesis. Shtansky, D.V.; Kiryukhantsev-Korneev, F.V.; Sheveiko, A.N.; Bashkova, I.A.; Malochkin, O.V.; Levashov, E.A.; D'yakonova, N.B.; Lyasotsky, I.V. // Physics of the Solid State;Feb2005, Vol. 47 Issue 2, p252 

    Transmission and scanning electron microscopy, x-ray phase analysis, x-ray photoelectron spectroscopy, and atomic-force microscopy were used to study the structure and surface topography of Ti–B–N, Ti–Cr–B–(N), and Cr–B–(N) thin films. Physical,...

  • Optimization of Arc-Sprayed Ni-Cr-Ti Coatings for High Temperature Corrosion Applications. Matthews, S.; Schweizer, M. // Journal of Thermal Spray Technology;Apr2013, Vol. 22 Issue 4, p538 

    High Cr content Ni-Cr-Ti arc-spray coatings have proven successful in resisting the high temperature sulfidizing conditions found in black liquor recovery boilers in the pulp and paper industry. The corrosion resistance of the coatings is dependent upon the coating composition, to form chromium...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics