TITLE

Structure and electrical properties of Bi3.15Nd0.85Ti3O12 nanofibers synthesized by electrospinning and sol-gel method

AUTHOR(S)
Liao, M.; Zhong, X. L.; Wang, J. B.; Xie, S. H.; Zhou, Y. C.
PUB. DATE
January 2010
SOURCE
Applied Physics Letters;1/4/2010, Vol. 96 Issue 1, p012904
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Bi3.15Nd0.85Ti3O12 (BNT) nanofibers with radii in the range of 30–200 nm have been prepared by the electrospinning and sol-gel method, and the structure and morphology of the nanofibers were characterize by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The phase transition and piezoelectric characteristics of the BNT nanofibers were performed by thermal analysis and scanning probe microscopy, respectively. The BNT nanofiber exhibits an effective piezoelectric coefficient of 89 pm/V and a Curie temperature of 500 °C, which are higher than that of the BNT bulk.
ACCESSION #
47416461

 

Related Articles

  • Phase state of the carbonaceous matter in the metalliferous shales of the Russian Far East. Berdnikov, N.; Shumilova, T.; Pyachin, S.; Pugachevsky, M.; Cherepanov, A.; Isaenko, S.; Karpovich, N.; Komarova, V. // Russian Journal of Pacific Geology;Jul2014, Vol. 8 Issue 4, p268 

    Carbonaceous matter (CM) in shales of some deposits and occurrences of the Russian Far East has been studied by scanning and transmission electron microscopy, Raman spectroscopy, and X-ray phase and differential thermal analyses. It was shown that the carbonaceous matter in the high-temperature...

  • Drift elimination in the calibration of scanning probe microscopes. Staub, R.; Alliata, D.; Nicolini, C. // Review of Scientific Instruments;Mar95, Vol. 66 Issue 3, p2513 

    Proposes a method of calibrating the scanning probe microscope (SPM) eliminating the effects of drift in a first-order approximation. Use of the method in calculating the piezo sensitivity from SPM images; Success in calibrating a commercial SPM system for atomic resolution scans with a...

  • Dimensional metrology with scanning probe microscopes. Griffith, Joseph E.; Grigg, David A. // Journal of Applied Physics;11/1/1993, Vol. 74 Issue 9, pR83 

    Presents a study which examined the application of scanning probe microscopes to dimensional measurement of topographic features. Reason for the use of probe microscopes as metrology tools; Shortcomings of standard optical and electron microscope metrology tools; Sources of error in dimensional...

  • SPM techniques evolve rapidly using diverse probe materials. Leckenby, Jezz // R&D Magazine;Apr99, Vol. 41 Issue 5, p35 

    Reports on the applications of scanning probe microscopes (SPM). Techniques in using the microscopes; Examples of applications; Significance of information contained in SPM images; Industrial applications of SPM.

  • Ultra-sharp pointed tip Si nanowires produced by very high frequency plasma enhanced chemical vapor deposition via VLS mechanism. Hamidinezhad, Habib; Wahab, Yussof; Othaman, Zulkafli // Journal of Materials Science;Aug2011, Vol. 46 Issue 15, p5085 

    Needle-like silicon nanowires have been grown using gold colloid as the catalyst and silane (SiH) as the precursor by very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD). Si nanowires produced by this method were unique with sharpness below 3 nm. High resolution...

  • Intracavity laser spectroscopy for the identification of nanomedia. Bobrinetskiĭ, I. I.; Kolerov, A. N.; Nevolin, V. K. // Technical Physics Letters;Sep2009, Vol. 35 Issue 9, p800 

    The optical absorption and emission spectra of heterogeneous plasma formations involved in the thermal synthesis of carbon-based nanomaterials have been studied. A characteristic relationship between parameters of the plasma-assisted synthesis of carbon nanotubes (CNTs) and the spectrum of giant...

  • Carbon Nanotubes As Scanning Probe Tips. Milas, M.; Foschia, R.; Kulik, A.; Gaál, R.; Ljubovic, E.; Forró, L. // AIP Conference Proceedings;2002, Vol. 633 Issue 1, p614 

    We have constructed a device for manipulating carbon nanotubes inside a transmission electron microscope. This setup allows us to select an individual nanotube of our choice and to attach it to an AFM probe tip. This way we obtain a tool which is useful for diverse applications. It can be used...

  • Probing the domain structure of BiFeO3 epitaxial films with three-dimensional reciprocal space mapping. Luo, Z. L.; Huang, H.; Zhou, H.; Chen, Z. H.; Yang, Y.; Wu, L.; Zhu, C.; Wang, H.; Yang, M.; Hu, S.; Wen, H.; Zhang, X.; Zhang, Z.; Chen, L.; Fong, D. D.; Gao, C. // Applied Physics Letters;5/5/2014, Vol. 104 Issue 18, p1 

    High-resolution 3-Dimensional Reciprocal Space Mapping (3D-RSM) has been performed on mixed-phase BiFeO3 (BFO) epitaxial films on (001)-oriented LaAlO3 substrates. Our results demonstrate that 3D-RSM is an effective way to present a structural overview of the different BFO polymorphs, domain...

  • Growth of Pd-Filled Carbon Nanotubes on the Tip of Scanning Probe Microscopy. Sakamoto, Tomokazu; Chiu, Chien-Chao; Tanaka, Kei; Yoshimura, Masamichi; Ueda, Kazuyuki // Journal of Nanomaterials;2009, Special section p1 

    We have synthesized Pd-filled carbon nanotubes (CNTs) oriented perpendicular to Si substrates using a microwave plasmaenhanced chemical vapor deposition (MPECVD) for the application of scanning probe microscopy (SPM) tip. Prior to the CVD growth, Al thin film (10 nm) was coated on the substrate...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics