TITLE

Referee acknowledgment for 2009

AUTHOR(S)
Davidson, Ronald C.
PUB. DATE
December 2009
SOURCE
Physics of Plasmas;Dec2009, Vol. 16 Issue 12, p129801
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
People who the author would like to thank for their assistance in the creation of the journal "Physics of Plasmas" are mentioned.
ACCESSION #
47244131

 

Related Articles

  • Simple time-resolving spectrometer for plasma impurity diagnosis. Yamada, Kimio; Kanamori, Takahiro // Review of Scientific Instruments;Jan1986, Vol. 57 Issue 1, p56 

    A simple time-resolving vacuum ultraviolet spectrometer system has been constructed and its utility demonstrated through performance tests on the Hitachi Tokamak. The system consists of a Seya monochrometer and a 30-anode microchannel plate detector to provide simultaneous measurements over all...

  • Pulsed hot cathode (LaB6) discharge for uniform plasma production. Savas, S. E.; Pyle, R. V.; Berkner, K. H. // Review of Scientific Instruments;Nov86, Vol. 57 Issue 11, p2699 

    A pulsed hot cathode hydrogen discharge of several milliseconds duration is used to produce a dense (<10[sup 14] cm[sup -3]), uniform plasma target for atomic collision studies. This plasma, whose cross section is determined by the cathode shape, is rectangular, since it is produced by a...

  • High power microwave line with arbitrary impedance matching capability for plasma applications. Ganguli, A.; Baskaran, R.; Naidu, P. A.; Raju, G. V. R. // Review of Scientific Instruments;Feb1989, Vol. 60 Issue 2, p244 

    The details of a high power microwave transmission line developed for plasma applications are presented. The line operates at 2.45 GHz and can handle about <=1 kW of cw microwave power with about 15%–20% insertion loss. A special feature of the line is its wide range impedance matching...

  • Kinetics of hydrogen atoms in high-density CF[sub 4]/H[sub 2] plasmas studied by (2+1)-photon laser-induced fluorescence spectroscopy. Sasaki, K.; Okamoto, M. // Applied Physics Letters;9/8/2003, Vol. 83 Issue 10, p1935 

    We measured the distribution of absolute H atom density in high-density, low-pressure CF[sub 4] plasmas with the addition of H[sub 2] by (2+1)-photon laser-induced fluorescence spectroscopy. The H atom density had hollow-shaped distributions, i.e., the H atom density adjacent to the chamber wall...

  • Production and characterization of a fully ionized He plasma channel. Gaul, E. W.; Gaul, E.W.; Le Blanc, S. P.; Le Blanc, S.P.; Rundquist, A. R.; Rundquist, A.R.; Zgadzaj, R.; Langhoff, H.; Downer, M. C.; Downer, M.C. // Applied Physics Letters;12/18/2000, Vol. 77 Issue 25 

    We report guiding of intense (I=1.3±0.7x10[sup 17] W/cm[sup 2]) 80 fs laser pulses with negligible spectral distortion through 1.5-cm-long preformed helium plasma channels. Channels were formed by axicon-focused laser pulses of either 0.3 J energy, 100 ps duration, after preionizing a 200-700...

  • Model for electron cooling by radiation losses in plasmas: Application to development of soft x-ray lasers. Skinner, C. H.; Keane, C. // Applied Physics Letters;5/19/1986, Vol. 48 Issue 20, p1334 

    We present a simple model which may be used to evaluate the suitability of different ions for rapid plasma cooling by line radiation in recombination pumped x-ray laser schemes.

  • Influence of the applied field frequency (27–2450 MHz) in high-frequency sustained plasmas used to etch polyimide. Sauvé, G.; Moisan, M.; Paraszczak, J.; Heidenreich, J. // Applied Physics Letters;8/8/1988, Vol. 53 Issue 6, p470 

    The effect of the plasma stimulating frequency upon the etching of polyimide is reported. For the first time, a system has been developed which generates, over a large frequency domain (27–2450 MHz), a high-frequency (HF) produced plasma by identical means (surface wave propagation) in a...

  • Etching mechanisms of polymers in oxygen microwave multipolar plasmas. Pelletier, J.; Arnal, Y.; Joubert, O. // Applied Physics Letters;11/14/1988, Vol. 53 Issue 20, p1914 

    A parametric study of polymer etching in an oxygen microwave multipolar plasma with independent rf wafer biasing is reported. The etch rate evolution as a function of atomic oxygen concentration, measured by actinometry, indicates a monolayer adsorption kinetics for the photoresist/oxygen...

  • Influence of oxygen pressure on the characteristics of the KrF-laser-induced plasma plume created above an YBaCuO superconducting target. Girault, C.; Damiani, D.; Aubreton, J.; Catherinot, A. // Applied Physics Letters;5/15/1989, Vol. 54 Issue 20, p2035 

    The laser-induced plasma plume created above an YBaCuO superconducting target by a KrF laser beam (248 nm) is investigated by time-resolved spectroscopy under an oxygen atmosphere. The influence of the oxygen partial pressure on the ejection velocities of the ablated species and on the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics