TITLE

A generalized stochastic perturbation technique for plasticity problems

AUTHOR(S)
Kamiński, Marcin
PUB. DATE
March 2010
SOURCE
Computational Mechanics;Mar2010, Vol. 45 Issue 4, p349
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The main aim of this paper is to present an algorithm and the solution to the nonlinear plasticity problems with random parameters. This methodology is based on the finite element method covering physical and geometrical nonlinearities and, on the other hand, on the generalized nth order stochastic perturbation method. The perturbation approach resulting from the Taylor series expansion with uncertain parameters is provided in two different ways: (i) via the straightforward differentiation of the initial incremental equation and (ii) using the modified response surface method. This methodology is illustrated with the analysis of the elasto-plastic plane truss with random Young’s modulus leading to the determination of the probabilistic moments by the hybrid stochastic symbolic-finite element method computations.
ACCESSION #
47202481

 

Related Articles

  • Comprehensive Method of Studying and Predicting the Deformation of Ceramic Products During Sintering. Andreev, D.; Zakharov, A. // Refractories & Industrial Ceramics;Jan2014, Vol. 54 Issue 5, p366 

    A comprehensive method is proposed for predicting the deformation of ceramic products under their own weight (the force of gravity) during sintering. The method is based on the torsion of thin-walled tubes, finite-element modeling, a calibration process that includes tests of specimens of the...

  • Finite Element Analysis based Ultrasonic Elastography. Xianxiang Wu; Yan Ming; Juan Wang // Advanced Materials Research;2014, Issue 887-888, p632 

    A variety of ultrasound elasticity imaging methods have been widely used in clinical. However, most of the existing methods are based on the assumption of organization for the pure elastic, and ignore the organization viscoelasticity effects on measurement results. In this paper, the finite...

  • An improved EAS brick element for finite deformation. Korelc, Jo�e; �olinc, Ur�a; Wriggers, Peter // Computational Mechanics;Sep2010, Vol. 46 Issue 4, p641 

    A new enhanced assumed strain brick element for finite deformations in finite elasticity and plasticity is presented. The element is based on an expansion of shape function derivatives using Taylor series and an extended set of orthogonality conditions that have to be satisfied for an...

  • A power-law rheology-based finite element model for single cell deformation. Zhou, E.; Xu, F.; Quek, S.; Lim, C. // Biomechanics & Modeling in Mechanobiology;Sep2012, Vol. 11 Issue 7, p1075 

    Physical forces can elicit complex time- and space-dependent deformations in living cells. These deformations at the subcellular level are difficult to measure but can be estimated using computational approaches such as finite element (FE) simulation. Existing FE models predominantly treat cells...

  • Finite Element Prediction of Sheet Forming Defects Using Elastic-Plastic, Damage and Localization Models. Haddag, Badis; Abed-Meraim, Farid; Balan, Tudor // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p227 

    In this work, an advanced anisotropic elastic-plasticity model is combined with a damage model and a strain localization criterion in the aim to describe accurately the mechanical behavior of sheet metals. Large strain, fully three-dimensional, implicit time integration algorithms are developed...

  • A numerical study on deformation of Newtonian droplets through converging cylindrical dies. Mostafaiyan, M.; Saeb, M. R.; Ahmadi, Z.; Khonakdar, H. A.; Wagenknecht, U.; Heinrich, G. // e-Polymers;Aug2013, Vol. 13 Issue 1, p49 

    In this work, the dynamic deformation of a viscose Newtonian droplet passing through cylindrical converging dies has been studied. The changes in the interfacial area between two immiscible Newtonian fluids have been considered as a variable representing the time-dependent deformation of a...

  • Finite element analysis and experimental investigation on deformation mechanism of non-axisymmetric tube spinning. Xia, Qinxiang; Cheng, Xiuquan; Long, Hui; Ruan, Feng // International Journal of Advanced Manufacturing Technology;Mar2012, Vol. 59 Issue 1-4, p263 

    This paper developed 3D elastoplastic finite element analysis (FEA) models to investigate non-axisymmetric tubes neck spinning. The three-roller mandreless neck spinning process was simulated by commercial FEA software, MSC. Marc. The distribution of the transient von Mises stresses in the...

  • Evaluation of Experimental Forming Limit Curves and Investigation of Strain Rate Sensitivity for the Start of Local Necking. Volk, Wolfram; Hora, Pavel // AIP Conference Proceedings;8/22/2011, Vol. 1383 Issue 1, p99 

    The failure prediction in sheet metal forming is typically realized by evaluating the so called forming limit curves (FLC). Up to now, the FLC determination was performed with failed specimens of Nakajima or Marciniak test setups. Standard methods determine the failure by considering the...

  • Bulging Deformation Prediction and Experimental Verification of Bonded Double-Layer Clad Cylinder in Rotating Compression. Sen-Chi Weng; Bor-Lih Kuo; Gow-Yi Tzou // Key Engineering Materials;2015, Vol. 661, p83 

    The objective of this study is to establish three analytical models including the Upper Bound Method (UBM), the Slab Method (SM), and the Finite Element Method (FEM) for the rotating compression of bonded double-layer clad cylinder. As for the prediction of bulging deformation, apart from the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics