TITLE

Effective magnetostriction and magnetomechanical coupling of terfenol-D composites

AUTHOR(S)
Guo, Z. J.; Busbridge, S. C.; Piercy, A. R.; Zhang, Z. D.; Zhao, X. G.; Wang, B. W.
PUB. DATE
May 2001
SOURCE
Applied Physics Letters;5/28/2001, Vol. 78 Issue 22, p3490
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Epoxy and glass matrix Terfenol-D composites have been produced by using a cold and hot compression-molding technique, respectively. The static and dynamic magnetic and magnetomechanical properties of samples with a volume fraction V[sub f] in the range of 10% to 82% have been investigated as functions of bias field, frequency, and ac drive field. The epoxy composites have a greater saturation magnetostrain than the glass composite with the same V[sub f]. The elastic modulus of the epoxy composites is dominated by that of the matrix, E[sub m]. Increasing the value of E[sub m] reduces the measured magnetostriction λ[sub c] of the composites. A model, based on the strain related energy equilibrium, has been developed to describe the experimental results for V[sub f] and E[sub m] dependences of λ[sub c] and the magnetomechanical coupling coefficient k[sub 33]. It is concluded that an optimum k[sub 33] value can be obtained by choosing a matrix with an appropriate elastic modulus. © 2001 American Institute of Physics.
ACCESSION #
4711225

 

Related Articles

  • New Products.  // ECN: Electronic Component News;Nov98, Vol. 42 Issue 11, p16 

    Features various recently launched electronic equipment. High-Temperature Plastic Connector Body from PEI-Genesis Inc.; TRA-DUCT LX80043 epoxy from TRA-CON Inc.; PAN-TY cables from Panduit Corp.

  • Epoxy compounds getting tougher. Trager, Jane // Manufacturers' Monthly;Mar2014, p30 

    The article offers the author's insights on the use of toughened epoxy compounds to seal or encapsulate and bond various electronic, medical and optical components. Topics discussed include toughening which involves the incorporation of ductile ruber or thermoplastic materials into epoxy, the...

  • Spin wave spectroscopy and microwave losses in granular two-phase magnetic nanocomposites. Lutsev, Leonid; Yakovlev, Sergey; Brosseau, Christian // Journal of Applied Physics;2/1/2007, Vol. 101 Issue 3, p034320 

    microwavesWe investigate the composition dependence of microwave properties of a series of cold-pressed powder compacts prepared from nanoparticles of ZnO, Ni, Co, and γ-Fe2O3 using the microstrip line method and spin wave spectroscopy (SWS). The microwave spectra of these magnetic...

  • Heat-Resistant Epoxy is Key to Expanding Display Terminals.  // Adhesives & Sealants Industry;Sep99, Vol. 6 Issue 7, p44 

    Features the heat-resistant epoxy from Insulcast used to encapsulate inverters used in the liquid crystal displays of Nellcor Puritan Bennett's ventilator system. Epoxy requirements of the inverters; Comparison with conventional epoxies; Curing of the epoxy compound.

  • Get the most out of epoxy potting and encapsulation compounds. Michaels, Robert // ECN: Electronic Component News;Jun2012, Vol. 56 Issue 6, p16 

    The article focuses on the importance of potting compounds in the encapsulating systems of electronic components. It also informs that potting applications widely use epoxy compounds because of its balanced mechanical, thermal and adhesion properties. It provides information to minimize...

  • The use of polyimide-modified aluminum nitride fillers in AlN@PI/Epoxy composites with enhanced thermal conductivity for electronic encapsulation. Yongcun Zhou; Yagang Yao; Chia-Yun Chen; Kyoungsik Moon; Hong Wang; Ching-ping Wong // Scientific Reports;4/25/2014, p1 

    Polymer modified fillers in composites has attracted the attention of numerous researchers. These fillers are composed of core-shell structures that exhibit enhanced physical and chemical properties that are associated with shell surface control and encapsulated core materials. In this study, we...

  • Preparation and microwave absorbing properties of carbon fibers/epoxy composites with grid structure. Zhang, Jun; Xiao, Peng; Zhou, Wei; Hong, Wen; Luo, Heng // Journal of Materials Science: Materials in Electronics;Feb2015, Vol. 26 Issue 2, p651 

    Microwave absorbing materials of carbon fibers/epoxy composites with grid structure are designed and fabricated based on the idea of gradient impedance. The microwave absorbing properties of the materials are measured by using a microwave network analyzer in the frequency range of 8-18 GHz. The...

  • Molecular Spintronics. Yakhmi, Jatinder; Bambole, Vaishali // Solid State Phenomena;6/4/2012, Vol. 189, p95 

    The emergence of spintronics (spin-based electronics), which exploits lectronic charge as well as the spin degree of freedom to store/process data has already seen some of its fundamental results turned into actual devices during the last decade. Information encoded in spins persists even when...

  • Bias voltage and temperature dependence of magneto-electric properties in double-barrier magnetic tunnel junction with amorphous Co-Fe-B electrodes. Zeng, Z.M.; Wang, Y.; Han, X. F.; Zhan, W. S.; Zhang, Z. // European Physical Journal B -- Condensed Matter;Jul2006, Vol. 52 Issue 2, p205 

    Bias voltage and temperature dependence of magneto-electric properties in double-barrier magnetic tunnel junctions(DBMTJs) with a structure of [IrMn/CoFe/Ru/CoFeB]/Al-O/CoFeB/Al-O/[CoFeB/Ru/CoFe/IrMn], have been investigated. The DBMTJs show a large tunnel magnetoresistance (TMR) ratio of up to...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics