TITLE

Application of an ultrathin LiF/Al bilayer in organic surface-emitting diodes

AUTHOR(S)
Hung, L. S.; Tang, C. W.; Mason, M. G.; Raychaudhuri, P.; Madathil, J.
PUB. DATE
January 2001
SOURCE
Applied Physics Letters;1/22/2001, Vol. 78 Issue 4, p544
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Organic surface-emitting diodes have been constructed with a multilayer stacked cathode consisting of (1) an ultrathin LiF/Al bilayer acting as an effective electron injector, (2) an optically low-loss and electrically conducting silver intermediate layer for sheet resistance reduction, and (3) a transparent and nonconducting capping layer for refractive index matching to optimize optical transmission. The entire cathode structure is prepared by conventional thermal evaporation without incurring radiation damage, and the resulting organic surface-emitting diodes exhibit superior electrical and optical characteristics.
ACCESSION #
4710930

 

Related Articles

  • Energy Focus: Bifunctional poly(vinylpyrrolidone) binders enhance lithium sulfide cathode performance. Wong, Dominica H.C. // MRS Bulletin;Oct2013, Vol. 38 Issue 10, p768 

    The article focuses on a study suggesting the potential use of bifunctional poly(vinylpyrrolidone) binders to improve lithium sulfide cathode performance. Researchers from Stanford University, California, and Beihang University have reported an enhanced structural stability and cycling of Li2S...

  • Low-cost laser-diode driver. Uranus, Henri P.; Januar, Indrajaya P. // Electronic Design;7/22/96, Vol. 44 Issue 15, p114 

    Presents instructions on how to design and construct a low-cost laser diode driver. Circuit description; Current limiting and lasing monitor.

  • Filter-on-diode technology reaches maturity. Forrest, Roger // Laser Focus World;Mar98, Vol. 34 Issue 3, p101 

    Focuses on the integration of a multilayer filter on a photodiode. Filter-on-diode design; Assembly; Coating performance; Potential uses for photodiodes with a directly deposited multilayer filter.

  • Semiconductor diode guidebook. Campisi, Skip // Popular Electronics;Jun97, Vol. 14 Issue 6, p51 

    Presents a simple guide in understanding diode characteristics and their use in circuit design. A simple current source; How the current source operates; Construction of the current source; How to connect a small-signal diodes; How to construct the schottky diodes; Zener diodes; Diode-connected...

  • Design of short-cavity, high-brightness 980 nm laser diodes with distributed phase correction. Zhang, Y.; Lim, J. J.; Benson, T. M.; Sewell, P.; Dods, S.; Larkins, E. C. // Applied Physics Letters;5/13/2002, Vol. 80 Issue 19, p3506 

    We present the design of a 980 nm short-cavity, high-brightness, laterally graded-index (GRIN) laser diode with distributed phase correction. The proposed laser consists of a feed waveguide section coupled to a GRIN waveguide region with a discretized hyperbolic-secant index profile. Detailed...

  • Skin effect in a gaseous plasma with a collision frequency proportional to the electron velocity. Latyshev, A.; Yushkanov, A. // Plasma Physics Reports;Nov2006, Vol. 32 Issue 11, p943 

    An analytic solution to the problem of skin effect in plasma is found for the first time by using a kinetic equation in which the collision frequency is proportional to the absolute value of the electron velocity. Mirror reflection of electrons from the plasma boundary is used as a boundary...

  • Application of rod return-current conductors for decreasing the magnetic field of the vacuum diode. Abdullin, E.; Morozov, A. // Instruments & Experimental Techniques;Jul2013, Vol. 56 Issue 4, p420 

    Results of the physical simulation and numerical calculations of magnetic field of the high-power vacuum diode with a large electron-beam cross section in the absence and with diode-installed return-current conductors in the form of rods are given. It is shown that the use of rods decreases the...

  • Brief Review: Electrochemical Performance of LSCF Composite Cathodes -- Influence of Ceria-Electrolyte and Metals Element. Ahmad, S.; Bakar, M. S. A.; Rahman, H. A.; Muchtar, A. // Applied Mechanics & Materials;2014, Issue 695, p3 

    Solid oxide fuel cells (SOFC) are an efficient and clean power generation devices. Low-temperature SOFC (LTSOFC) has been developed since high-temperature SOFC (HTSOFC) are not feasible to be commercialized because high in cost. Lowering the operation temperature has caused substantial...

  • Joint trenches: Do you know if arcing conductors are burning up gas lines? Irwin, Patricia // Electrical World;June97, Vol. 211 Issue 6, p32 

    Looks at the safety of joint trenches. Burning conductors posing risk to other services; Question of why electric and gas lines are buried together; Advantages and disadvantages of joint trenches.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics