TITLE

ALUMINUM ANODIZING CLINIC

AUTHOR(S)
Chesterfield, Larry
PUB. DATE
November 2009
SOURCE
Products Finishing;Nov2009, Vol. 74 Issue 2, p32
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
The article provides an answer to a question of the process considerations that need to be taken account in the preparation and anodizing to reduce smutting
ACCESSION #
47096415

 

Related Articles

  • Changing Shop Management Software TakesTeamwork. Hertzfeld, Dick; Weimer, George // Production Machining;Nov/Dec2004, Vol. 4 Issue 6, p30 

    Focuses on the upgrades made by Metal and Seal Products Inc. to its production machining process. Customizations of software and hardware platforms; In-house capabilities for anodizing and zinc plating; Support given by the company's information technology administrator Michael Bobbitt on the...

  • A STUDY ON THE PHOTOLUMINESCENCE PROPERTIES OF POROUS 6H-SiC(p) AND SiC FILM ON p-Si SUBSTRATE. BOURENANE, K.; KEFFOUS, A.; KECHOUANE, M.; BOURENANE, A.; NEZZAL, G.; BOUKEZZATA, A. // Modern Physics Letters B;3/10/2008, Vol. 22 Issue 6, p415 

    P-type porous SiC layers were fabricated by anodization of a hot-pressed p-type 6H-SiC (30 kΩcm) and a 1.6 μm SiC film was deposited onto p-type Si(100) substrate by Pulsed Laser Deposition (PLD) in HF. In order to facilitate the electrochemical etching of the substrate, ethylene glycol...

  • Ti6Al4V foams having nanotubular surfaces for orthopaedic applications. İzmir, Merve; Tufan, Yiğithan; Tan, Güher; Ercan, Batur // Surface & Interface Analysis: SIA;Sep2019, Vol. 51 Issue 9, p954 

    Despite the widespread use of Ti6Al4V in orthopaedics, the bioinert nature of this alloy limits its biological fixation with the bone tissue. To enhance its bone fixation, two different types of Ti6Al4V foams were fabricated, and their surfaces were modified zto possess nanofeatures. To prepare...

  • Observation of the trend of interface formation in anodic native oxide on InSb by marker experiments. Shapira, Yoram; Bregman, J.; Calahorra, Z. // Applied Physics Letters;Jan1985, Vol. 46 Issue 1, p48 

    We have investigated the trend of anodization of InSb by predeposition of a very thin Cr layer, acting as a marker. Results of Auger electron spectroscopy show that the oxidation process is carried out by oxygen in diffusion through the oxide film. The details and implications of this...

  • Anodized insulation for CICC coils. Zeller, A. F. // AIP Conference Proceedings;2002, Vol. 614 Issue 1, p255 

    Anodization techniques for production of CICC for radiation resistant magnets are described. Aluminum conduit can be anodized on the inside to provide electrical isolation while leaving the outside of the conductor available for structural use. This technique should work well for NbTi conductor,...

  • Correlation of optical and structural properties of light emitting porous silicon. Lee, H.-J.; Seo, Y.H.; Oh, D.-H.; Nahm, K.S.; Suh, E.-K.; Lee, Y.H.; Lee, H.J.; Hwang, Y.G.; Park, K.-H.; Chang, S.H.; Lee, E.H. // Applied Physics Letters;2/22/1993, Vol. 62 Issue 8, p855 

    Analyzes the correlation of optical and structural properties of light emitting porous silicon. Preparation of samples by silicon substrate anodization; Dependence of photoluminescence and Raman spectra; Transition of the porous silicon to a mixture of polycrystalline and hydrogenated amorphous...

  • Silica waveguides fabricated by oxidization of selectively anodized porous silicon. Nagata, Seiichi; Matsushita, Shinobu; Saito, Kazuya; Ohshita, Yoshio; Maeda, Yoshinobu; Yamaguchi, Masafumi; Ikushima, Akira J. // Applied Physics Letters;4/21/2003, Vol. 82 Issue 16, p2559 

    To keep the current density at the porous silicon (PS) and Si interface constant, independent of anodization depth, a pulse anodization method has been developed. In this method, a pulse current is controlled to be proportional to the PS/Si interface area. This method was applied to produce...

  • Observation of crossing pores in anodically etched n-GaAs. Langa, S.; Carstensen, J.; Christophersen, M.; Fo¨ll, H.; Tiginyanu, I. M. // Applied Physics Letters;2/19/2001, Vol. 78 Issue 8, p1074 

    Pores in GaAs in the micrometer range and oriented in <111> directions have been observed during the anodization of GaAs in aqueous HCl electrolytes. A direct evidence of pores intersection is presented which is a very promising feature for three-dimensional micro- and nanostructuring of III-V...

  • Low-temperature plasma anodization of tantalum silicides. Perrière, J.; Siejka, J.; Climent, A.; Navarro, E.; Martinez-Duart, J. M. // Journal of Applied Physics;4/1/1987, Vol. 61 Issue 7, p2656 

    Presents a study which examined the low-temperature plasma anodization of cosputtered tantalum silicides. Studies on the thermal oxidation of tantalum disicilicide; Properties of the tantalum silicide films; Relationship between anodization potential and time; Details of the electrical...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics