TITLE

The effect of different metal surface grindings in the metal-ceramic bond strength

AUTHOR(S)
Bagis, Bora; Oztas, D. Derya
PUB. DATE
January 2009
SOURCE
Internet Journal of Dental Science;2009, Vol. 6 Issue 2, p15
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Purpose: This study aims to compare the bond strength of Ni-Cr alloys to ceramic after different types of grindings. Materials and Methods: 20 specimens made of Ni-Cr alloys were divided into two groups. The first group of specimens was grinded with a carbide bur (EL5, SS White Burs Inc, Lakewood, NJ, USA) in one direction and the second group of the specimens was grinded in multiple directions. After sandblasting and steam cleaning, 2 mm ceramic (Ceramico II, Ceramco Inc, Burlington, NJ-USA) was fused to Ni-Cr alloy. A tensile bond strength test was used and the data was analyzed by one-way statistically analysis of variance (ANOVA) and Student's t-test. Surface characterizations of Ni-Cr alloys are also examined on scanning-electron microscopy (SEM) after debonding. Results: Grinding alloys in multiple directions prior to the application of the ceramic, demonstrates significantly higher bond strength with ceramic than grinding in one direction (p<0.05). Conclusion: Within the limitation of this study, metal grinding in multiple directions with light hand pressure maybe an advantage in increasing metal-ceramic bond strength.
ACCESSION #
45125526

 

Related Articles

  • Delayed Crack Development in Porcelain Due to Incompatibility Stress. ANUSAVICE, K. J.; DEHOFF, P. H.; GRAY, A.; LEE, R. B. // Journal of Dental Research;Aug1988, Vol. 67 Issue 8, p1086 

    Delayed failure of metal-ceramic restorations due to static fatigue can occur when residual tensile stress is present in porcelain, even in the absence of intra-oral forces. Fixed-partial-denture (FPD) specimens and semicircular arch specimens with gapped cross-arch segments were employed to...

  • Evaluation of flexural bond strength of porcelain to used nickel-chromium alloy in various percentages. Madhav, V. N. V.; Padmanabhan, T. V.; Subramnian, R. // Indian Journal of Dental Research;Jan/Feb2012, Vol. 23 Issue 1, p11 

    Aim: The aim of this in vitro study was to evaluate the flexural bond strength of porcelain to combinations of used and new nickel-chromium alloy in various proportions. Materials and Methods: Used and new nickel-chromium bonding alloys were combined in various proportions (groups I to V; 10...

  • Measurement of Oxide Adherence to Silver-Free High-Palladium Alloys. Peregrina, Alejandro; Schorr, Bruno L.; Eick, J. David; Robinson, Scott J.; Feil, Philip H. // International Journal of Prosthodontics;Mar/Apr1992, Vol. 5 Issue 2, p173 

    The purpose of this study was to test the adherence strength of oxides to some silver-free high-palladium alloys, and to compare the results to values obtained from Au-Pd and Ni-Cr metals. The results showed that the adherence strengths of the oxides were greater than the reported cohesive...

  • Evaluation of failure characteristics and bond strength a ceramic and polycarbonate bracket debonding: effect of bracket base silanization. Ozcan, M.; Finnema, K.; Ybema, A. // European Journal of Orthodontics;Apr2008, Vol. 30 Issue 2, p176 

    The objectives of this study were to evaluate the effect of silanization on the failure type and shear-peel bond strength (SBS) of ceramic and polycarbonate brackets, and to determine the type of failure when debonded with either a universal testing machine or orthodontic pliers. Silanized and...

  • Effects of Sol-gel Processed Silica Coating on Bond Strength of Resin Cements to Glass-Infiltrated Alumina Ceramic. Haifeng Xie; Xiaozu Wang; Yu Wang; Feimin Zhang; Chen Chen; Yang Xia // Journal of Adhesive Dentistry;2009, Vol. 11 Issue 1, p49 

    Purpose: The aim of this study was to verify the effects of sol-gel processed silica coating on the bond strength between resin cement and glass-infiltrated aluminum oxide ceramic. Materials and Methods: Silica coatings were prepared on glass-infiltrated aluminum oxide ceramic surface via the...

  • Influence of Surface Characteristics of Four Silica-based Machinable Ceramics on Flexural Strength and Bond Strength of a Dual-curing Resin Luting Agent. Yoshida, Keiichi; Meng, Xiangfeng; Kamada, Kohji; Atsuta, Mitsuru // Journal of Adhesive Dentistry;2007, Vol. 9 Issue 4, p407 

    Purpose: The aim of the present study was to evaluate the crystalline phase and microstructure of 4 commercial machinable ceramic blocks -- Cerec Vitablocs Mark II (Vita), ProCAD (Ivoclar/Vivadent), GN-I (GC), and GNCeram (GC) -- and compare flexural strength and shear bond strength between a...

  • Bond Strength of All-Ceramics to Tooth Structure Using New Luting Systems. Toman, Muhittin; Toksavul, Suna; Akin, Ash // Journal of Adhesive Dentistry;2008, Vol. 10 Issue 5, p373 

    Purpose: To examine the effect of different adhesive luting systems on the shear bond strength of all-ceramic restorations to dentin surfaces. Materials and Methods: Forty-eight all-ceramic disks (2 x 3 mm; IPS e.max Press) were fabricated. Forty-eight noncarious extracted human molars were...

  • XP BOND in Self-curing Mode used for Luting Porcelain Restorations. Part A: Microtensile Test. Raffaelli, Ornella; Cagidiaco, Maria Crysanti; Goracci, Cecilia; Ferrari, Marco // Journal of Adhesive Dentistry;2007, Vol. 9 Issue 2, p275 

    Purpose: To assess the bond strength to dentin of an experimental adhesive and the proprietary resin cement used in different curing modes to lute ceramic disks of different thicknesses. Materials and Methods: Empress II disks (Ivoclar-Vivadent) were luted to dentin using XP BOND (Dentsply [XP])...

  • Microtensile Bond Strength of Self-adhesive Luting Cements to Ceramic. Escribano, Nuria; de la Macorra, José C. // Journal of Adhesive Dentistry;2006, Vol. 8 Issue 5, p337 

    Purpose: To test the null hypothesis that three self-adhesive luting materials had the same microtensile bond strength when used to lute ceramic IPS Empress II disks to the dentin of perfused teeth. Materials and Methods: Occlusal enamel and the roots of 9 human third molars were removed and...

Share

Read the Article

Courtesy of

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics