TITLE

Studies of Uni-Univalent Ion Exchange Reactions Using Strongly Acidic Cation Exchange Resin Amberlite IR-120

AUTHOR(S)
Singare, P.; Lokhande, R.; Samant, N.
PUB. DATE
September 2009
SOURCE
Natural Science;Sep2009, Vol. 1 Issue 2, p124
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The selectivity behaviour of ion exchange resin Amberlite IR-120 for inorganic cations like sodium and potassium was predicted on the basis of thermodynamic data. The equilibrium constant K values calculated for uni-univalent ion exchange reaction systems were observed to increase with rise in temperature, indicating endothermic ion exchange reactions. From the K values calculated at different temperatures the enthalpy values were calculated. The low enthalpy and higher K values for K+ ion ex-change reaction indicates more affinity of the resin for potassium ions as compared to that for sodium ions also in the solution. The technique used in the present experimental work will be useful in understanding the selectivity behaviour of different ion exchange resins for ions in the solution. Although the ionic selectivity data for the ion exchange resins is readily available in the literature, it is expected that the information obtained from the actual experimental trials will be more helpful. The technique used in the present experimental work when applied to different ion exchange resins will help in there characterization.
ACCESSION #
44959507

 

Related Articles

  • Selectivity study of strongly acidic cation exchange resin Amberlite IR-120. Singare, P. U.; Lokhande, R. S.; Samant, N. G.; Dhatrak, M. R. // Colloid Journal;Aug2010, Vol. 72 Issue 4, p538 

    The thermodynamic measurements was carried out to study the selectivity of cation exchange resin Amberlite IR-120 in protonated form with respect to Mg, Ca, Sr and Ba ions in solution. The equilibrium constant K was calculated using the activity coefficients of ions in solution as well as in the...

  • Nitrates removal on PUROLITE A 520E resin: kinetic and thermodynamic studies. Turki, T.; Hamouda, S. Ben; Hamdi, R.; Amor, M. Ben // Desalination & Water Treatment;Mar2012, Vol. 41 Issue 1-3, p1 

    Ion-exchange technology was studied to remove nitrates using PUROLITE A 520E. Predicting the rate at which adsorption takes place for a given system is probably the single most important factor for adsorber design, with adsorbate residence time and ultimately the reactor dimensions controlled by...

  • Load dependence of hardness of the doped soda-lime silicate glasses. Suszyńska, Maria // Optica Applicata;2012, Vol. 42 Issue 2, p399 

    The aim of the work described was to study the load dependence of micro- and nano-hardness for soda-lime silicate glass doped with some univalent cations. The Fourcault-type glass samples were chemically treated by dipping them in melted baths of KNO3, AgNO3 and CuCl. The nano- and...

  • Thermodynamic characteristics of ion-exchange sorption of Co cations on Na-vermiculite. Tarasevich, Yu.; Krysenko, D.; Polyakov, V. // Colloid Journal;Mar2014, Vol. 76 Issue 2, p202 

    The exchange of Na ions of vermiculite for Co cations is measured by sorption-analytical and microcalorimetric methods. The previously revealed growth of the equilibrium constant with a rise in the degree of filling θ of vermiculite exchange sites with Co cations is confirmed. This result is...

  • Utilization of Spent Ion-Exchange Resins for Soil Reclamation. Mariola Chomczyn´ska; Lucjan Pawłowski // Environmental Engineering Science;Jul2003, Vol. 20 Issue 4, p301 

    Investigations concerned the effect on plant productivity in sand of a small addition of the standard ion-exchange substrate Biona-312, compared with alternative additions of the ion-exchange substrate Mp and a mixture of NPK monoionic forms--the latter both prepared from used ion-exchangers....

  • Lanxess names new heads for three business units.  // Paintindia;Oct2010, Vol. 60 Issue 10, p130 

    The article announces the appointment of the new heads of the three business units of Lanxess including Hubert Fink for the basic chemicals (BAC) business, Michael Zobel for the semi-crystalline products (SCP) business, and Jean-Marc Vesselle for the ion exchange resins (ION) business.

  • Solid Solutions of Calcium Aluminates C3A, C12A7 and CA with Sodium Oxide. Ostrowski, C.; Żelazny, J. // Journal of Thermal Analysis & Calorimetry;2004, Vol. 75 Issue 3, p867 

    The research concerns the influence of a substantial range of sodium ion concentrations on the structure of the calcium aluminates C3A*, C12A7 and CA until CaO is emitted. The research also shows the influence of sodium ions of the cell parameters of each calcium aluminate and what reaction...

  • The regularities of changes in the sodium ion levels in fish erythrocytes during adaptation to a temperature. Martemyanov, V. // Biology Bulletin;Aug2009, Vol. 36 Issue 4, p412 

    It has been shown that unlike fish blood plasma and muscles, the relation between sodium level and temperature is a specific characteristic of erythrocytes. The patterns of changes in the sodium level in fish erythrocytes under a rise in water temperature during annual cycles and under...

  • Experimental Investigation of the Activity of Sodium in a Liquid Sodium–Potassium Alloy in a Wide Temperature Range. Shpil'rain, E. E.; Savchenko, V. A.; Mozgovoi, A. G.; Skovorod'ko, S. N. // High Temperature;Jan2003, Vol. 41 Issue 1, p23 

    The EMF method is applied to investigate the activity of sodium in a molten sodium-potassium alloy containing 87.2 wt. % of potassium. The measurements are performed in two different experimental set- ups. One of them uses glass containing sodium ions as electrolyte, and the other one uses...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics