TITLE

Experimental method for in situ determination of material textures at simultaneous high pressure and high temperature by means of radial diffraction in the diamond anvil cell

AUTHOR(S)
Liermann, Hanns-Peter; Merkel, Sébastien; Miyagi, Lowell; Wenk, Hans-Rudolf; Shen, Guoyin; Cynn, Hyunchae; Evans, William J.
PUB. DATE
October 2009
SOURCE
Review of Scientific Instruments;Oct2009, Vol. 80 Issue 10, p104501
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We introduce the design and capabilities of a resistive heated diamond anvil cell that can be used for side diffraction at simultaneous high pressure and high temperature. The device can be used to study lattice-preferred orientations in polycrystalline samples up to temperatures of 1100 K and pressures of 36 GPa. Capabilities of the instrument are demonstrated with preliminary results on the development of textures in the bcc, fcc, and hcp polymorphs of iron during a nonhydrostatic compression experiment at simultaneous high pressure and high temperature.
ACCESSION #
44909763

 

Related Articles

  • X-ray diffraction measurements of Mo melting to 119 GPa and the high pressure phase diagram. Santamaría-Pérez, D.; Ross, M.; Errandonea, D.; Mukherjee, G. D.; Mezouar, M.; Boehler, R. // Journal of Chemical Physics;3/28/2009, Vol. 130 Issue 12, p124509 

    In this paper, we report angle-dispersive X-ray diffraction data of molybdenum melting, measured in a double-sided laser-heated diamond-anvil cell up to a pressure of 119 GPa and temperatures up to 3400 K. The new melting temperatures are in excellent agreement with earlier measurements up to 90...

  • Invited Article: High-pressure techniques for condensed matter physics at low temperature. Yejun Feng; Jaramillo, R.; Jiyang Wang; Yang Ren; Rosenbaum, T. F. // Review of Scientific Instruments;Apr2010, Vol. 81 Issue 4, p041301 

    Condensed matter experiments at high pressure accentuate the need for accurate pressure scales over a broad range of temperatures, as well as placing a premium on a homogeneous pressure environment. However, challenges remain in diamond anvil cell technology, including both the quality of...

  • New developments in laser-heated diamond anvil cell with in situ synchrotron x-ray diffraction at High Pressure Collaborative Access Team. Yue Meng; Hrubiak, Rostislav; Rod, Eric; Boehler, Reinhard; Guoyin Shen // Review of Scientific Instruments;Jul2015, Vol. 86 Issue 7, p1 

    An overview of the in situ laser heating system at the High Pressure Collaborative Access Team, with emphasis on newly developed capabilities, is presented. Since its establishment at the beamline 16-ID-B a decade ago, laser-heated diamond anvil cell coupled with in situ synchrotron x-ray...

  • High-pressure in situ structure measurement of low-Z noncrystalline materials with a diamond-anvil cell by an x-ray diffraction method. Sato, Tomoko; Funamori, Nobumasa; Kikegawa, Takumi // Review of Scientific Instruments;Apr2010, Vol. 81 Issue 4, p043906 

    We have developed techniques for high-pressure in situ structure measurement of low-Z noncrystalline materials with a diamond-anvil cell (DAC) by an x-ray diffraction method. Since the interaction between low-Z materials and x rays is small and the sample thickness in a DAC is also small, the...

  • Strength and equation of state of NaCl from radial x-ray diffraction. Lun Xiong; Ligang Bai; Jing Liu // Journal of Applied Physics;2014, Vol. 115 Issue 3, p1 

    The strength and equation of state of NaCl were determined under nonhydrostatic compression up to 27 GPa using an energy-dispersive radial x-ray diffraction technique in a diamond-anvil cell using the lattice strain theory. Together with estimation of the high-pressure shear modulus, it is...

  • Equation of state of rhenium and application for ultra high pressure calibration. Anzellini, Simone; Dewaele, Agnès; Occelli, Florent; Loubeyre, Paul // Journal of Applied Physics;2014, Vol. 115 Issue 4, p1 

    The isothermal equation of state of rhenium has been measured by powder X-ray diffraction experiments up to 144 GPa at room temperature in a diamond anvil cell. A helium pressure transmitting medium was used to minimize the non-hydrostatic stress on the sample. The fit of pressure-volume data...

  • Pressure, stress, and strain distribution in the double-stage diamond anvil cell. Lobanov, Sergey S.; Prakapenka, Vitali B.; Prescher, Clemens; Konôpková, Zuzana; Liermann, Hanns-Peter; Crispin, Katherine L.; Chi Zhang; Goncharov, Alexander F. // Journal of Applied Physics;2015, Vol. 118 Issue 3, p035905-1 

    Double stage diamond anvil cells (DACs) of two designs have been assembled and tested. We used a standard symmetric DAC with flat or beveled culets as a primary stage and CVD microanvils machined by a focused ion beam as a second. We evaluated pressure, stress, and strain distributions in gold...

  • An electrical microheater technique for high-pressure and high-temperature diamond anvil cell experiments. Weir, S. T.; Jackson, D. D.; Falabella, S.; Samudrala, G.; Vohra, Y. K. // Review of Scientific Instruments;Jan2009, Vol. 80 Issue 1, pN.PAG 

    Small electrical heating elements have been lithographically fabricated onto the culets of “designer” diamond anvils for the purpose of performing high-pressure and high-temperature experiments on metals. The thin-film geometry of the heating elements makes them very resistant to...

  • High-temperature structure of C[sub 60]: An in situ X-ray diffraction study. Vogel, W. // Applied Physics A: Materials Science & Processing;1996, Vol. 62 Issue 4, p295 

    High-purity C[sub 60] has been studied by in situ X-Ray Diffraction (XRD). Between 300 and 900 K, the volume thermal expansion coefficient is α[sub v] =4.57(4)× 10[sup -5] K[sup -1] with no observable deviations from linearity. Recrystallization is activated at T≥600 K, as observed...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics