TITLE

Glass-forming ability enhanced by proper additions of oxygen in a Fe-based bulk metallic glass

AUTHOR(S)
Li, H. X.; Gao, J. E.; Jiao, Z. B.; Wu, Y.; Lu, Z. P.
PUB. DATE
October 2009
SOURCE
Applied Physics Letters;10/19/2009, Vol. 95 Issue 16, p161905
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Effects of oxygen on glass formation in the Fe73Mo3.0C7.0Si3.3B5.0P8.7 bulk metallic glass were studied in detail. Surprisingly, it was found that a critical level of oxygen is effective in enhancing the glass-forming ability of the current Fe-based bulk metallic glass due to the facts that (i) oxygen can increase the crystallization resistance via suppressing the precipitation of the competitive primary phase and (ii) oxygen can stabilize the glass-forming liquid as manifested by the decrease in the liquidus temperature. However, excess oxygen additions will destabilize the liquid and induce the formation of more stable oxygen-containing crystalline phase, thus deteriorating the glass-forming ability.
ACCESSION #
44837274

 

Related Articles

  • Thermal and elastic effects upon crystallization of the metallic glass PdCuNiP. Kobelev, N.; Khonik, V.; Afonin, G. // Physics of the Solid State;Sep2015, Vol. 57 Issue 9, p1715 

    The change in the shear modulus upon crystallization and the heat of crystallization of the bulk metallic glass PdCuNiP have been determined. It has been shown that the obtained results can be explained in terms of the model assuming the existence of 'defects' in the glass structure, which are...

  • Magnetic Relaxations in Amorphous Fe61Co10Y8Zr1B20 Alloy. PIETRUSIEWICZ, P.; BŁOCH, K.; GONDRO, J.; NABIAŁEK, M.; DOŠPIAŁ, M.; SZOTA, M. // Acta Physica Polonica, A.;Jun2014, Vol. 125 Issue 6, p106 

    Effects of annealing on the disaccommodation phenomenon in bulk metallic glasses (BMGs), obtained by injection-casting method have been studied. The amorphous structure has been confirmed using X-ray diffractometer. The annealing process has been performed at temperature below the...

  • Contributions to the homogeneous plastic flow of in situ metallic glass matrix composites. Fu, X. L.; Li, Y.; Schuh, C. A. // Applied Physics Letters;12/12/2005, Vol. 87 Issue 24, p241904 

    The homogeneous deformation of Zr-based bulk metallic glass composites is studied near the glass transition temperature, at various levels of reinforcement volume fraction. Through examination of the constitutive response, it is seen that the presence of in situ reinforcements increases the flow...

  • Ni-based bulk glassy alloys with superhigh strength of 3800 MPa in Ni–Fe–B–Si–Nb system. Baolong Shen; Chuntao Chang; Inoue, Akihisa // Applied Physics Letters;5/15/2006, Vol. 88 Issue 20, p201903 

    The effects of replacement of Ni by Fe on the glass-forming ability (GFA) and mechanical properties of Ni–B–Si–Nb glassy alloys were examined. The substitution of Fe for Ni caused increases of GFA and mechanical properties. Ni-based bulk glassy alloys (BGAs) with diameters...

  • Binary eutectic clusters and glass formation in ideal glass-forming liquids. Lu, Z. P.; Shen, J.; Xing, D. W.; Sun, J. F.; Liu, C. T. // Applied Physics Letters;8/14/2006, Vol. 89 Issue 7, p071910 

    In this letter, a physical concept of binary eutectic clusters in “ideal” glass-forming liquids is proposed based on the characteristics of most well-known bulk metallic glasses (BMGs). The authors approach also includes the treatment of binary eutectic clusters as basic units, which...

  • Giant converse magnetoelectric effect in multi-push-pull mode Metglas/Pb(Zr,Ti)O3/Metglas laminates. Li, Menghui; Wang, Yaojin; Hasanyan, Davresh; Li, Jiefang; Viehland, D. // Applied Physics Letters;3/26/2012, Vol. 100 Issue 13, p132904 

    The converse magnetoelectric (CME) effect was investigated theoretically and experimentally for multi-push-pull mode Metglas/Pb(Zr,Ti)O3/Metglas laminates. The experimental and theoretical values of the CME coefficient (αB) exhibited similar trends. A large αB = 6.94 G/V was observed at 1...

  • Precisely predicting and designing the elasticity of metallic glasses. Liu, Z. Q.; Wang, R. F.; Qu, R. T.; Zhang, Z. F. // Journal of Applied Physics;2014, Vol. 115 Issue 20, p203513-1 

    We reveal that the elastic moduli of metallic glasses (MGs) invariably vary in a much steeper manner than that predicted by the conventional "rule of mixtures" in individual alloy systems. Such deviations are proved to originate fundamentally from their disordered atomic structures and intrinsic...

  • A constitutive theory and modeling on deviation of shear band inclination angles in bulk metallic glasses. Ming Zhao; Mo Li // Journal of Materials Research;Aug2009, Vol. 24 Issue 8, p29 

    A constitutive theory for metallic glasses is established that is based mainly on the Drucker-Prager model and a free-volume theory. The primary emphasis of this theory is on volume dilatation and its consequences on mechanical responses in metallic glasses that have been known from studies in...

  • Bulkier glass formability enhanced by minor alloying additions. Ma, D.; Cao, H.; Ding, L.; Chang, Y. A.; Hsieh, K. C.; Pan, Y. // Applied Physics Letters;10/24/2005, Vol. 87 Issue 17, p171914 

    In this study, we present a computational thermodynamic strategy to obtain a minor but optimum amount of additional element into a base alloy to improve its glass-forming ability, through thermodynamically calculating the maximum liquidus depressions caused by various alloying addition (or...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics