TITLE

Dual nonlinear dielectric resonance and nesting microwave absorption peaks of hollow cobalt nanochains composites with negative permeability

AUTHOR(S)
Xiao-Ling Shi; Mao-Sheng Cao; Jie Yuan; Xiao-Yong Fang
PUB. DATE
October 2009
SOURCE
Applied Physics Letters;10/19/2009, Vol. 95 Issue 16, p163108
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The permittivity and permeability behaviors of the hollow cobalt nanochains composites have been investigated in 2–18 GHz. The permittivity presents two dielectric resonance peaks at about 12.3 and 14.5 GHz, respectively, which mainly results from the cooperative consequence of the hollow structure and the one-dimensional structure of the as-synthesized Co nanochains. The negative permeability behavior within 12.3–18 GHz is attributed to radiation of the magnetic energy according to the as-established equivalent circuit model. Two strong absorption peaks of the composites nest at the resonance frequencies due to the effect of the dual nonlinear dielectric resonance and the negative permeability behavior.
ACCESSION #
44837254

 

Related Articles

  • KENDÄ°LİĞİNDEN YERLEÅžEN POMZA VE PERLÄ°T AGREGALI HAFÄ°F HARÇLARIN MEKANÄ°K ÖZELLÄ°KLERÄ°. Gönen, Tahir // e-Journal of New World Sciences Academy (NWSA);2009, Vol. 4 Issue 2, p186 

    Self compacting mortars have been used as repair mortar or to determine component rates of the self compacting concrete. In this study; self compacting lightweight mortars were produced with basaltic pumice and expanded perlite aggregate. Expanded perlite aggregate was used at rates 10, 20, 30,...

  • Thermal stability of MoSi2-SiC composites in air at temperatures of 1100–1400°C. M. Sazonova; L. Efimenko // Glass Physics & Chemistry;Apr2009, Vol. 35 Issue 2, p219 

    Abstract  Composites xMoSi2-(100 − x)SiC are prepared over a wide composition range (x= 10–90 mol %) by hot and cold pressing methods. The optimum pressing parameters (temperature, pressure, time) are determined. The heat resistance, the thermal...

  • ABOUT A TOPOLOGICAL DEPENDENCE OF THE PERMEABILITY FACTOR IN DARCY RULE. Petrovich, Bushlanov Vladimir; Nickolaevna, Sentyakova Elena; Vladimirovich, Bushlanov Ivan // Vestnik of Astrakhan State Technical University. Series: Marine ;2012, Issue 1, p94 

    The permeability factor in Darcy rule has the dimension of a square of length Due to image rights restrictions, multiple line equation(s) cannot be graphically displayed. where э d -- an effective diameter of the particles composing the porous environment; Sl -- a dimensionless factor...

  • FABRIC, POROSITY, AND PERMEABILITY. Middleton, Gerard V. // Encyclopedia of Sediments & Sedimentary Rocks;2003, p265 

    The article presents information on the fabric, porosity and permeability of rocks. Properties of the arrangement of particles in rock spaces; Orientation of rock grains; Examination of techniques to measure the porosity of rocks; Factors to consider in assessing the permeability of rocks.

  • Use of sand beds of variable permeability in beach profile engineering. Heitor Reis, A.; Gama, Cristina // AIP Conference Proceedings;5/30/2010, Vol. 1254 Issue 1, p231 

    Here we present a technique based on theoretical grounds for dealing with beachface dynamics in response to wave forcing. Previous work has provided a relationship involving mean sand grain size, wave height, and beachface slope for a broad range of Iribarren number. The key aspect of beach...

  • Permeability Measurements for Random Soft Porous Medium and its Implications to Lift Generation. Crawford, Robert; Bueti, Girolama; Nathan, Rungun; Lidan You; Qianhong Wu // AIP Conference Proceedings;5/30/2010, Vol. 1254 Issue 1, p143 

    In the past decade, foundations have been laid for understanding the lift generation in a soft porous medium under rapid compaction (Feng and Weinbaum [1], Wu, et al. [2,3], Barabadi, et al. [4], Al-Chidiac, et al. [5]). One of the key parameters that affect lift generation is the variation of...

  • CHARACTERIZATION OF WATER-SATURATED POROUS CEMENT PASTE BY A LASER BASED ULTRASONIC NDE TECHNIQUE. Ningli Yang; Jae Hong Kim; Thomas, Jeffrey J.; Balogun, Oluwaseyi; Krishnaswamy, Sridhar // AIP Conference Proceedings;2/22/2010, Vol. 1211 Issue 1, p1541 

    A laser based ultrasonic technique is explored for predicting the mechanical integrity and durability of cementitious materials. It is well known that these properties depend on the mechanical properties, and structural properties including porosity and permeability. The technique used involves...

  • Permeability Measurement of High Performance Concrete at Elevated Temperature Employing a New Test Set-up. Fiedlerová, Michaela; Kirnbauer, Johannes; Bruckner, Heinrich // Advanced Materials Research;2015, Vol. 1124, p288 

    This paper is focused on clarifying the behaviour of concrete at elevated temperature with employing a new test set-up constructed at the Institute of Building Construction and Technology, Vienna University of Technology. This unique test set-up allows measuring gas permeability of different...

  • Mechanical Properties and Melt Quality Relationship of Sr-modified Al-12Si Alloy. Uludağ, M.; Uyaner, M.; Yilmaz, F.; Dişpinar, D. // Archives of Foundry Engineering;Dec2015, Vol. 15 Issue 4, p134 

    The formation of oxide film on the surface of aluminium melts, i.e. bifilms, are known to be detrimental when they are incorporated into the cast part. These defects causes premature fractures under stress, or aid porosity formation. In this work, Al-12 Si alloy was used to cast a step mould...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics