Improving multi-axis laer cutting

Vendramini, Antonio
September 2009
Industrial Laser Solutions;Sep2009, Vol. 24 Issue 9, p8
The article focuses on the use of 3D Optimu Vivida laser system by Prima Industrie SpA. According to the Prima's Chief Executive Officer Massimo Bovi, the Optimu system uses Vivida laser head which is accessible in X,Y and Z axes and allows to be moved in elevated dynamics. It mentions the advantages of Vivida laser which includes the reduction of cutting time, the increase of the cutting quality and the ease of use for production of low-volume products.


Related Articles

  • Micro-LAM saves manufacturers time, money, and diamonds.  // American Ceramic Society Bulletin;Sep2014, Vol. 93 Issue 7, p6 

    The article discusses the Micro-Laser Assisted Machining (Micro-LAM), a process that incorporates a laser into a high pressure demand cutter to soften the surface of the material being cut.

  • Laser cell runs circles around workpieces.  // Automotive Manufacturing & Production;Jan1998, Vol. 110 Issue 1, p35 

    Reports on the use of the LCM-3AL five-axis laser cutting cell by DCT Utilase Systems for cylindrical workpieces. Availability of choice between carbon dioxide and Nd:YAG laser resonators to accommodate various materials; Use of servo linear and pneumatic rotational axis to coordinate loading...

  • New Product News.  // Metal Center News;Dec2002, Vol. 42 Issue 13, p64 

    Presents information on products related to metal industry in the U.S. Features of bevel plate; Applications of laser cutting unit; Equipment for drilling steel and stainless steels.

  • Metal Cutting at Light Speed. Mandel, Richard // Welding Design & Fabrication;Jul2006, Vol. 79 Issue 7, p16 

    The article provides information about industrial cutting laser and discusses its advantages compared to conventional cutting systems. Laser machines cut sheets, metal and pipe materials faster, while producing high quality surface finish. These machines enable medium and high-volume production...

  • Automated laser cuts variability.  // InTech;Apr2004, Vol. 51 Issue 4, p19 

    This article presents information on the automated laser cutting robot developed for cutting metals. The use of laser-cutting systems has not become widespread because of the extreme sensitivity of the process to external disturbances and the difficulties in controlling and tuning the variables...

  • Modeling of the Front of Melting and Destruction of a Melt Film During Gas‐Laser Cutting of Metals. Kovalev, O. B.; Orishich, A. M.; Petrov, A. P.; Fomin, V. M.; Yudin, P. V.; Malov, A. N.; Ermolaev, G. V. // Journal of Applied Mechanics & Technical Physics;Jan/Feb2004, Vol. 45 Issue 1, p133 

    The products of laser cutting of metals on an automated laser setup are investigated. Results of model experiments are presented, where soft wax was used instead of metal transforming into the melt; soft wax filled a narrow flat slot between two glass plates and was removed by a heated air...

  • Investigation into the dynamics of laser-cut foil X-pinches and their potential use for high repetition rate operation. Collins IV, G. W.; Valdivia, M. P.; Zick, T. O.; Kim, J.; Haas, D. M.; Forsman, A. C.; Stephens, R. B.; Beg, F. N. // Applied Physics Letters;7/14/2014, Vol. 105 Issue 2, p1 

    We report on results from experiments using laser-cut X shaped foils (or foil X-pinches) driven by the 250 kA, 150 ns rise-time GenASIS Linear Transformer Driver. Optical probing of the laser-cut foil X-pinches shows considerable dynamic and qualitative similarity with the more traditional wire...

  • Laser cutting machine has more work space.  // Trailer / Body Builders;Mar2004, Vol. 45 Issue 5, p86 

    Evaluates the TC L 4050 laser cutting machine from Trumpf Inc. Key features of the machine; Advantages offered; List of laser technology offered by the product.

  • Restoring productivity: New laser heads boost production. Woods, Ken // Welding Design & Fabrication;Aug2006, Vol. 79 Issue 8, p26 

    The article focuses on the development of laser cutting technology in the industrial manufacturing environment in the U.S. Since 1990 there have been a number of laser cutting machines installed worldwide and almost 9,000 of those are in the country. The overall price of new laser systems has...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics