Estimation of Parameters Obtained by Electrochemical Impedance Spectroscopy on Systems Containing High Capacities

Stević, Zoran; Vujasinović, Mirjana Rajčić; Radunović, Milan
September 2009
Sensors (14248220);2009, Vol. 9 Issue 9, p7365
Academic Journal
Electrochemical systems with high capacities demand devices for electrochemical impedance spectroscopy (EIS) with ultra-low frequencies (in order of mHz), that are almost impossible to accomplish with analogue techniques, but this becomes possible by using a computer technique and accompanying digital equipment. Recently, an original software and hardware for electrochemical measurements, intended for electrochemical systems exhibiting high capacities, such as supercapacitors, has been developed. One of the included methods is EIS. In this paper, the method of calculation of circuit parameters from an EIS curve is described. The results of testing on a physical model of an electrochemical system, constructed of known elements (including a 1.6 F capacitor) in a defined arrangement, proved the validity of the system and the method.


Related Articles

  • Impedance spectroscopy of micron sized magnetic tunnel junctions with MgO tunnel barrier. Ingvarsson, Snorri; Arikan, Mustafa; Carter, Matthew; Weifeng Shen; Gang Xiao // Applied Physics Letters;6/7/2010, Vol. 96 Issue 23, p232506 

    We have studied the magnetoimpedance of micron sized magnetic tunnel junction sensors with 1.7 nm MgO tunnel barrier. We performed ac impedance spectroscopy in the frequency range between 100 Hz–40 MHz as a function of applied magnetic field in the sensing direction. We model our devices...

  • ELECTROCHEMICAL IMPEDANCE ANALYSIS OF β-TITANIUM ALLOYS AS IMPLANTS IN RINGERS LACTATE SOLUTION. Bhola, Rahul; Bhola, Shaily M.; Mishra, Brajendra; Olson, David L. // AIP Conference Proceedings;2/22/2010, Vol. 1211 Issue 1, p1381 

    Commercially pure titanium and two β-titanium alloys, TNZT and TMZF, have been characterized using various electrochemical techniques for their corrosion behavior in Ringers lactate solution. The variation of corrosion potential and solution pH with time has been discussed. Electrochemical...

  • Monitorización del crecimiento de microorganismos en sistemas cerrados utilizando espectroscopia de impedancia eléctrica. Olguín-Sánchez, R. A.; Rojas-Rendón, J. A.; Díaz-Campillo, M. J.; Salazar, Y. // Revista Mexicana de Ingeniería Biomédica;dec2009, Vol. 30 Issue 2, p98 

    Nowadays, the supervising of biological process is trying to use the time and production costs optimization. This process involves the micro-organism monitoring throughout the biomass growing stages. Therefore, the objective of this study is to obtain the time behavior of the biomass...

  • Resolution scaling in noncontact scanning impedance imaging. Green, Benjamin C.; Shang, Tao; Morine, Jacey C.; Liu, Hongze; Schultz, Stephen M.; Oliphant, Travis E.; Hawkins, Aaron R. // Review of Scientific Instruments;Nov2004, Vol. 75 Issue 11, p4610 

    Noncontact scanning impedance imaging has been presented as a method to provide high resolution, high contrast images for a variety of material systems. This technique combines electrical impedance measurements with very high resolution scanning. This article reports on efforts to scale this...

  • Investigation of Pb/PbS a positive Schottky junction formed on conductive glass in contact with alkaline solution. Heidaripour, A.; Jafarian, M.; Gobal, F.; Mahjani, M. G.; Miandari, S. // Journal of Applied Physics;2014, Vol. 116 Issue 3, p034906-1 

    PbS on Pb thin film (Pb/PbS) was deposited on conductive glass (CG) substrate (CG/Pb/PbS) using electrochemical techniques to investigate the Schottky junction in solution. The CG/Pb/PbS electrode was investigated by different techniques based on thermionic emission theory. Electrochemical cell...

  • Forward and backward waves in the arterial system: impedance or wave intensity analysis? Hughes, A. D.; Parker, K. H. // Medical & Biological Engineering & Computing;Feb2009, Vol. 47 Issue 2, p207 

    Both impedance analysis and wave intensity analysis are used to separate measured pressure and flow waveforms into their forward and backward components. The separation is sensitive to the characteristic impedance or wave speed determined from the data. In all other aspects, the results are...

  • Applying the Upper Integral to the Biometric Score Fusion Problem in the Identification Model. Fakhar, Khalid; El Aroussi, Mohamed; Saidi, Mohamed Nabil; Aboutajdine, Driss // Information (2078-2489);2015, Vol. 6 Issue 3, p494 

    This paper presents a new biometric score fusion approach in an identification system using the upper integral with respect to Sugeno's fuzzy measure. First, the proposed method considers each individual matcher as a fuzzy set in order to handle uncertainty and imperfection in matching scores....

  • Electrochemical sensor based on β-cyclodextrin incorporating ion-sensitive membrane for determination of m-cresol. Lamari, Rim; Zougar, Saida; Ghodbane, Ilhem; Kherrat, Rochdi // Research on Chemical Intermediates;Dec2016, Vol. 42 Issue 12, p7977 

    Due to their significantly harmful impact on the environment and human health, the qualitative and quantitative determination of cresols receives great attention. In this study, a highly sensitive and selective polymeric membrane incorporating β-cyclodextrin was prepared for the determination...

  • Prediction Capability Analysis of Two and Three Parameters Software Reliability Growth Models. Prince Williams, D. R. // Information Technology Journal;2006, Vol. 5 Issue 6, p1048 

    This study aims to analyze the predict capability of some of the popular Software Reliability growth models to understand the potential of having two or three parameters to facilitate the estimation process. The predict validity analysis will be on two key factors, one pertaining to the degree...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics