TITLE

Magnetostriction-driven cantilevers for dynamic atomic force microscopy

AUTHOR(S)
Penedo, M.; Fernández-Martínez, I.; Costa-Krämer, J. L.; Luna, M.; Briones, F.
PUB. DATE
October 2009
SOURCE
Applied Physics Letters;10/5/2009, Vol. 95 Issue 14, p143505
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
An actuation mode is presented to drive the mechanical oscillation of cantilevers for dynamic atomic force microscopy. The method is based on direct mechanical excitation of the cantilevers coated with amorphous Fe–B–N thin films, by means of the film magnetostriction, i.e., the dimensional change in the film when magnetized. These amorphous magnetostrictive Fe–B–N thin films exhibit soft magnetic properties, excellent corrosion resistance in liquid environments, nearly zero accumulated stress when properly deposited, and good chemical stability. We present low noise and high resolution topographic images acquired in liquid environment to demonstrate the method capability.
ACCESSION #
44539670

 

Related Articles

  • Thermally actuated tapping mode atomic force microscopy with polymer microcantilevers. Mitra, Bhaskar; Gaitas, Angelo // Review of Scientific Instruments;Feb2009, Vol. 80 Issue 2, pN.PAG 

    This paper demonstrates a thermally actuated tapping mode atomic force microscopy (AFM) with a polymer cantilever. The cantilever (350×250×3 μm3) is made from polyimide and includes an embedded resistive heater for thermal actuation. The oscillation of the cantilever is due to the...

  • Small single-crystal silicon cantilevers formed by crystal facets for atomic force microscopy. Nakagawa, Kazuhisa; Hashiguchi, Gen; Kawakatsu, Hideki // Review of Scientific Instruments;Sep2009, Vol. 80 Issue 9, p095104 

    We have developed a batch fabrication method of small cantilevers formed by crystal facets of single-crystal silicon for improving the sensitivity of atomic force microscopy. In order to realize a small cantilever with a very sharp tip, we have employed KOH anisotropic etching and local...

  • Maximum allowable load of atomic force microscope (AFM) nanorobot. Korayem, M. H.; Hoshiar, A. K.; Ebrahimi, N. // International Journal of Advanced Manufacturing Technology;Nov2009, Vol. 43 Issue 7/8, p690 

    In this paper, maximum load-carrying capacity algorithm is developed for atomic force microscope (AFM) nanorobot. Considering real-time control limitation for micro nano manufacture process, predicting possibility of this manufacture process is really important. Main limitation in this method is...

  • Resonance frequency analysis for surface-coupled atomic force microscopy cantilever in ambient and liquid environments. Mirman, Boris; Kalinin, Sergei V. // Applied Physics Letters;2/25/2008, Vol. 92 Issue 8, p083102 

    Shifts in the resonance frequencies of surface-coupled atomic force microscope (AFM) probes are used as the basis for the detection mechanisms in a number of scanning probe microscopy techniques including atomic force acoustic microscopy (AFAM), force modulation microscopy, and resonance...

  • Normal spring constants of cantilever plates for different load distributions and static deflection with applications to atomic force microscopy. Hähner, Georg // Journal of Applied Physics;Oct2008, Vol. 104 Issue 8, p084902 

    The normal spring constant describes how a cantilever plate deflects under an applied load. The application of microcantilevers in atomic force microscopy (AFM) and in other technologies employing such cantilevers as probes has sparked a significant interest in the knowledge and the...

  • Note: Lateral force microscope calibration using multiple location pivot loading of rectangular cantilevers. Koo-Hyun Chung; Reitsma, Mark G. // Review of Scientific Instruments;Feb2010, Vol. 81 Issue 2, p026104 

    This note outlines a calibration method for atomic force microscope friction measurement that uses the “pivot” method of [Bogdanovic et al., Colloids Surf. B 19, 397 (2000)] to generate optical lever sensitivities for known torque applied to rectangular cantilevers. We demonstrate...

  • Dual resonance excitation system for the contact mode of atomic force microscopy. Kopycinska-Müller, M.; Striegler, A.; Schlegel, R.; Kuzeyeva, N.; Köhler, B.; Wolter, K.-J. // Review of Scientific Instruments;Apr2012, Vol. 83 Issue 4, p043703 

    We propose an improved system that enables simultaneous excitation and measurements of at least two resonance frequency spectra of a vibrating atomic force microscopy (AFM) cantilever. With the dual resonance excitation system it is not only possible to excite the cantilever vibrations in...

  • Dynamical properties of the Q-controlled atomic force microscope. Kokavecz, János; Horváth, Zoltán L.; Mechler, Ádám // Applied Physics Letters;10/11/2004, Vol. 85 Issue 15, p3232 

    In intermittent contact mode atomic force microscopy (AFM), the quality factor (Q) of the oscillating probe is believed to account for the imaging speed and sensitivity. Q control is a method to artificially modify the quality factor of the probe. Here, we present a comprehensive study of the...

  • True molecular resolution in liquid by frequency-modulation atomic force microscopy. Fukuma, Takeshi; Kobayashi, Kei; Matsushige, Kazumi; Yamada, Hirofumi // Applied Physics Letters;5/9/2005, Vol. 86 Issue 19, p193108 

    The increasing attention directed towards nanobiological science requires high-resolution imaging tools for the liquid environment. We have been successful in recording molecular-resolution images of polydiacetylene in water with the frequency-modulation atomic force microscopy (FM-AFM). With...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics