TITLE

Nonlinear conductivity of electronic origin in self-doped LaMnO3+δ

AUTHOR(S)
Fisher, B.; Genossar, J.; Patlagan, L.; Reisner, G. M.
PUB. DATE
September 2009
SOURCE
Applied Physics Letters;9/28/2009, Vol. 95 Issue 13, p132501
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We report on electronic transport measurements on polycrystalline, nonmetallic samples of LaMnO3+δ, in the Ohmic and non-Ohmic regimes. The non-Ohmic regime has been investigated using single current pulses of short duration. The large nonlinearity of the pulsed I-V characteristics is probably of the same origin as that of the nonmetallicity of LaMnO3+δ, that is, disorder introduced by Mn vacancies. The dc I-V characteristics, under similar fields, show much larger nonlinearity and hysteresis, typical of self-heating in samples with activated conductivity.
ACCESSION #
44449137

 

Related Articles

  • Electrical characterization of Al/Si ohmic contacts to heavily boron doped polycrystalline diamond films. Werner, M.; Johnston, C.; Chalker, P. R.; Romani, S.; Buckley-Golder, I. M. // Journal of Applied Physics;3/1/1996, Vol. 79 Issue 5, p2535 

    Provides information on a study that investigated the effect of contact length on the contact resistivity of Al/Si ohmic contacts using Mesa etched transmission line model test structures fabricated on heavily boron doped polycrytalline diamond films. Experimental procedure; Results and...

  • Mn magnetism and magnetic structures in RMn2. Ballou, R.; Deportes, J.; Lemaire, R.; Ouladdiaf, B. // Journal of Applied Physics;4/15/1988, Vol. 63 Issue 8, p3487 

    Presents a study that examined the effects of the magnetic frustration, associated with the instability of the manganese (Mn) magnetism for different RMn[sub2] compounds. Use of the induction technique to melt the samples; Cause of the frustration of the magnetic structures of RMn[sub2];...

  • The Si/Pd ohmic contact to n-GaP based on the solid phase regrowth principle. Moon-Ho Park; Wang, L.C.; Dufner, D. C.; Deng, Fei; Lau, S. S.; Tan, I. H.; Kish, F. // Journal of Applied Physics;4/1/1997, Vol. 81 Issue 7, p3138 

    Examines the silicon/palladium ohmic contact to n-GaP based on the solid phase regrowth process principle. Rutherford backscattering spectrometry; Transmission electron microscopy; Energy dispersive x-ray spectrometry; Coox-Strack measurement; Contact resistivities; Ohmic contact formation...

  • Low resistance Pd/Zn/Pd ohmic contact to p-In0.82Ga0.18As0.39P0.61. Park, Moon-Ho; Wang, L.C. // Journal of Applied Physics;3/15/1997, Vol. 81 Issue 6, p2720 

    Studies a low resistance Pd/Zn/Pd ohmic contact to p-InGaAsP. Minimum resistivity of the contact; Surface and interfacial morphologies of the samples; Thermal stability of the contact.

  • A COMPARATIVE STUDY OF BSF LAYERS FOR ULTRA-THIN CdS:O/CdTe SOLAR CELLS. Islam, M. A.; Sulaiman, Yusuf; Amin, Nowshad // Chalcogenide Letters;Feb2011, Vol. 8 Issue 2, p65 

    Due to high electron affinity and consequently large work function of CdTe, the CdTe based solar cells are suffering from ohmic contacting problem at the back contact. Among the several numbers of methods still used try to overcome the ohmic contacting problem, the use of back surface field...

  • Heterostructure ohmic contacts to p-CdTe polycrystalline films. Sukach, A. V.; Tetyorkin, V. V.; Tkachuk, A. I. // Semiconductor Physics, Quantum Electronics & Optoelectronics;2014, Vol. 17 Issue 3, p268 

    Heterostructure contacts p+-PbTe/p-CdTe were prepared using the hot-wall technique on glassceramic substrates. It has been shown that the potential barrier at the p+-PbTe/p-CdTe interface is not formed in the case of heavily doped lead telluride. That allows one to create ohmic heterocontacts of...

  • Variable range hopping in A2MnReO6 (A=Ca, Sr, Ba). Fisher, B.; Genossar, J.; Chashka, K. B.; Knizhnik, A.; Patlagan, L.; Reisner, G. M. // Journal of Applied Physics;Aug2008, Vol. 104 Issue 3, p033716 

    We report on transport measurements on polycrystalline samples of A2MnReO6 (A=Ca, Sr, Ba), CMRO, SMRO, and BMRO, in the Ohmic and non-Ohmic regimes. The resistivity follows, over wide ranges of temperatures, the relation derived for variable range hopping of carriers localized in a parabolic...

  • Formation of Low-Resistance Ohmic Contact by Damage-Proof Selective-Area Growth of Single-Crystal n+-GaN Using Plasma-Assisted Molecular Beam Epitaxy. Hui-Chan Seo; Seung Jae Hong; Chapman, Patrick; Kyekyoon (Kevin) Kim // Journal of Electronic Materials;May2008, Vol. 37 Issue 5, p635 

    To achieve very low ohmic contact resistance, an n+-GaN layer was selectively deposited using plasma-assisted molecular beam epitaxy (PAMBE). During this process polycrystalline GaN grew on the patterned SiO2 region, which was subsequently removed by a heated KOH solution, resulting in damage to...

  • Scientific foundation for the production of carbothermal manganese alloys. Gusev, V.; Khrolenko, V.; Sysolyatin, A.; Zilberman, A.; Kravchenko, D. // Metallurgist;Mar2011, Vol. 55 Issue 3/4, p187 

    This article discusses the current state of scientific support for the production of manganese alloys and ways to make their production more efficient. A mathematical model is obtained to describe the recovery of manganese and how the yield of manganese is affected by geometric, electrical, and...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics