TITLE

Efficient red electroluminescence from devices having multilayers of a europium complex

AUTHOR(S)
Hu, Wenping; Wenping Hu; Matsumura, Michio; Wang, Mingzhao; Mingzhao Wang; Jin, Linpei; Linpei Jin
PUB. DATE
December 2000
SOURCE
Applied Physics Letters;12/25/2000, Vol. 77 Issue 26
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In order to get red electroluminescence from a europium (Eu) complex with high efficiency, a hole-injection layer was inserted between the Eu-complex layer and an indium-tin-oxide electrode, and a hole-blocking layer was inserted between the Eu-complex and electron-transporting layers. To further improve the efficiency, devices having multiple-stacked Eu-complex (2.5 nm)/hole blocking (2.5 nm) units were fabricated. By stacking six units, the maximal luminance and emission efficiency of the red emission were increased to more than twice that from a device with a single Eu-complex layer. © 2000 American Institute of Physics.
ACCESSION #
4414879

 

Related Articles

  • Electroluminescence of Alkali-Halide Crystals at Temperatures Exceeding Room Temperature. Druzhinin, A. P.; Ekhanin, S. G.; Nesmelov, I. S.; Sveshnikov, I. V. // Russian Physics Journal;Feb2004, Vol. 47 Issue 2, p226 

    Focuses on the electroluminescence (EL) of alkali-halide crystals (AHC) at temperatures exceeding room temperature. Use of europium in measurement; Determination of the maximum temperature of measurements through the properties of electrolytic electrodes; Application of electric field to a thin...

  • Electroluminescence of europium silicate thin film on silicon. Qi, Jifa; Matsumoto, Takahiro // Applied Physics Letters;5/24/1999, Vol. 74 Issue 21, p3203 

    Describes an electroluminescent device fabricated by a europium silicate layer on a silicon substrate. External quantum efficiency of the white color electroluminescence exhibited by the device; Threshold voltage; Response to modulation signal.

  • Bright red light-emitting organic electroluminescent devices having a europium complex as an.... Kido, Junji; Hayase, Hiromichi // Applied Physics Letters;10/24/1994, Vol. 65 Issue 17, p2124 

    Describes the fabrication of organic electroluminescent (EL) devices with a trivalent europium (Eu) complex as an emitter. Exhibition of bright red luminescence by triphenyldiamine derivative/Eu complex; Composition of the EL spectrum; Achievement of luminance of 460 cd per square meter and...

  • Europium complex as a highly efficient red emitter in electroluminescent devices. Sun, Pei-Pei; Duan, Jiun-Pey; Shih, Huai-Ting; Cheng, Chien-Hong // Applied Physics Letters;7/29/2002, Vol. 81 Issue 5, p792 

    Several devices using a europium complex Eu(TTA)[sub 3](DPPz)(TTA=2-thenoyltrifluoroacetonate, DPPz=dipyrido[3,2-a:2,'3-'-c]phenazine) as dopant emitter were fabricated. The performances of these devices are among the best reported for devices incorporating a europium complex as a red emitter....

  • Electroluminescence from poly(phenylene vinylene) in a planar metal-polymer-metal structure. Lemmer, U.; Vacar, D. // Applied Physics Letters;5/20/1996, Vol. 68 Issue 21, p3007 

    Investigates the electroluminescence from a surface emitting metal-polymer-metal structure. Evaporation of gold electrodes on free-standing films of poly(phenylene vinylene); Occurrence of polarized light emission; Extension of the recombination zone.

  • Carbazole-functionalized europium complex and its high-efficiency organic electroluminescent properties. Xin, H.; Li, F. Y.; Guan, M.; Huang, C. H.; Sun, M.; Wang, K. Z.; Zhang, Y. A.; Jin, L. P. // Journal of Applied Physics;10/1/2003, Vol. 94 Issue 7, p4729 

    A complex tris(dibenzoylmethanato){1-ethyl-2-(N-ethyl-carbazole-yl-4) imidazo[4,5-f]1,10phenanthroline} europium(III) [Eu(DBM)[sub 3]phencarz] functionalized by a hole-transport group carbazole was synthesized. Devices using this complex as emitter showed greatly enhanced performance benefited...

  • Lowering of operational voltage of organic electroluminescent devices by coating indium-tin-oxide electrodes with a thin CuO[sub x] layer. Hu, Wenping; Manabe, Kaoru; Furukawa, Takumi; Matsumura, Michio // Applied Physics Letters;4/15/2002, Vol. 80 Issue 15, p2640 

    We devised a method of modifying indium-tin-oxide (ITO) electrodes for organic electroluminescent devices. It consists of deposition of a nanometer-thick Cu layer on the ITO electrode and an oxygen plasma treatment. By this modification, the surface of the ITO substrate is covered with a partly...

  • Influence of thickness of electrochemically deposited hole-transport film on electroluminescent properties. Wang, G.; Wong, T.K.S.; Hu, X. // Applied Physics A: Materials Science & Processing;2000, Vol. 71 Issue 1, p117 

    Abstract, Polybithiophene (PBTh) film was used as a hole-transport layer in an electroluminescent (EL) device. The PBTh was electropolymerized on indium tin oxide (ITO)coated glass acting as a working electrode. From the change of full width at half maximum (FWHM) of the EL spectrum with the...

  • Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode. Hung, L.S.; Tang, C.W. // Applied Physics Letters;1/13/1997, Vol. 70 Issue 2, p152 

    Examines the use of aluminum/lithium fluoride bilayer as an electrode for organic electroluminescence devices. Composition of the bilayer; Electron injection and efficiency of devices using the bilayer electrode; Effects attributed to band bending of the organic layer in contact with the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics