TITLE

Fabrication of highly ordered porous structures

AUTHOR(S)
Meng, Q.-B.; Gu, Z.-Z.; Sato, O.; Fujishima, A.
PUB. DATE
December 2000
SOURCE
Applied Physics Letters;12/25/2000, Vol. 77 Issue 26
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We describe a simple method for the fabrication of highly ordered porous structures. That is, utilizing capillary forces, ultrafine particles are directly used to assemble themselves in the voids of template while the template is being assembled. The highly ordered porous structures with larger area and uniform orientation can be produced after removing the template. The majority of the single domains with uniform orientation prepared can reach 0.1 mm2 in area. Scanning electron microscope images and transmission spectrum of these samples have confirmed the success of this simple method. © 2000 American Institute of Physics.
ACCESSION #
4414865

 

Related Articles

  • `Device structures on porous silicon studied by scanning electron microscopy in the electron-beam... Balagurov, L.A.; Katz, E.A. // Journal of Applied Physics;7/1/1996, Vol. 80 Issue 1, p574 

    Presents the results of scanning electron microscope (SEM) measurements of porous silicon (PS) structures using an electron-beam-induced current (EBIC) regime. Measurements' efficiency in demonstrating the nature of the processes determining the transport of nonequilibrium charge carriers.

  • Effects of boundary reflection on photoacoustic spectrum of porous silicon. Kawahara, T.; Morimoto, J.; Tahira, K.; Miyakawa, T. // Applied Physics A: Materials Science & Processing;2000, Vol. 70 Issue 4, p407 

    Abstract. Photoacoustic (PA) amplitude and phase spectra are studied on porous silicon (PS) samples. For the sample with a thinner PS layer and a rough interlace observed by field-emission scanning electron microscope (FE-SEM), PA amplitude decays rapidly at short wavelengths but stays at a...

  • Controlling growth and field emission property of aligned carbon nanotubes on porous silicon... Dongsheng Xu; Guolin Guo // Applied Physics Letters;7/26/1999, Vol. 75 Issue 4, p481 

    Reports on the production of carbon nanotubes array by pyrolysis of hydrocarbons catalyzed by nickel nanoparticles embedded in porous silicon substrates. Results of a scanning electron microscope imaging; Evidence that the nanotubes are well graphitized.

  • Effect of photodeposited iron oxide and tin oxide on the consolidation of porous Vycor glass. Mendoza, E. A.; Sunil, D.; Wolkow, E.; Gafney, H. D.; Rafailovich, M. H.; Sokolov, J.; Long, G. G.; Jemian, P. R.; Schwartz, S. A.; Wilkens, B. J. // Applied Physics Letters;7/16/1990, Vol. 57 Issue 3, p209 

    Iron oxide and tin oxide have been photodeposited in porous Vycor glass and examined before and after consolidation of the glass. Scanning electron microscopy reveals that the iron oxide particles are larger than the tin oxide particles. However, small-angle x-ray scattering and Rutherford...

  • Bovine serum albumin adsorption on passivated porous silicon layers. Tay, L.; Rowell, N. L.; Poitras, D.; Fraser, J. W.; Lockwood, D. J.; Boukherroub, R. // Canadian Journal of Chemistry;Oct2004, Vol. 82 Issue 10, p1545 

    Hydrogen-terminated porous silicon (pSi-H) films were fabricated through electrochemical anodization of crystalline silicon in hydrofluoric-acid-based solutions. The pSi-H surface was chemically functionalized by thermal reaction with undecylenic acid to produce an organic monolayer covalently...

  • Ultrathin luminescent nanoporous silicon on n-Si: pH dependent preparation in aqueous NH[sub 4]F.... Dittrich, Th.; Rauscher, S. // Applied Physics Letters;8/21/1995, Vol. 67 Issue 8, p1134 

    Investigates the formation of luminescent nanoporous silicon on ammonium fluoride solutions. Use of scanning electron microscopy to determine the acceleration voltage of electrons; Details on the shape of photoluminescence spectra; Information on the etch rate of oxidized silicon atoms.

  • Heat-treatment effects on porous silicon. Sabet-Dariani, R.; Haneman, D. // Journal of Applied Physics;7/15/1994, Vol. 76 Issue 2, p1346 

    Reports on the use of high-resolution scanning electron microscopy employing an instrument with a field-emission tip. Preparation of porous silicon samples; Data on the current-voltage characteristics of a sample.

  • Investigation of Antireflective Porous Silicon Coating for Solar Cells. Hyukyong Kwon; Jaedoo Lee; Minjeong Kim; Soohong Lee // ISRN Nanotechnology;2011, Special section p1 

    Solar cell is device that directly converts the energy of solar radiation to electrical energy. So it is important for solar cell to reduce the surface reflection of light in order to improve the efficiency of the device. Texturing and antireflection coating have been used to reduce the...

  • Development of Micro-Pores Including Nano-Pores on n-Si (100) Coated with Sparse Ag Under Dark Etching in 1.0 M NH4F Containing 5.0 M H2O2. Lin, J. C.; Chuang, C. L.; Lin, C. C.; Lerondel, G. // International Journal of Electrochemical Science;Aug2012, Vol. 7 Issue 8, p6846 

    Specimens of n-type single crystalline silicon sparsely deposited with silver nano-particles on the Si (100) surfaces were put in 1.0 M NH4F + 5.0 M H2O2 to investigate their dark etching. Through examination by scanning electron microscopy (SEM), the morphology on the n-Si (100) surface etched...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics